References
- Adamson, A. W., Gast, A. P.: Physical Chemistry of Surfaces, 6th Ed. Wiley-Interscience, New York, 1997.
- Bentz, D. P., Lura, P.: Mixture proportioning for internal curing, Concrete International, Vol. 27, ACI, pp: 35-40.
- Briatka, P.: Internal Curing of Concrete Using Lightweight Aggregate, In: Proceedings of conference on Design, Preparation and Execution of Constructions, held in Bratislava, March 2010.
- Briatka, P.: Reduction of Plastic Shrinkage Cracking in Concrete Pavements and Elimination of Maintenance Expenses, In: Proceedings of The Young European Arena of Research, Forum of European National Highway Research Laboratories, 2010.
- Briatka, P., Makýš, P.: Elimination of Plastic Shrinkage Cracking in Concrete, In: Proceedings of Junior Scientist Conference held in Vienna, April, 2010.
- Briatka, P., Makýš, P.: Fresh Concrete Curing - Part 1: Water Loss from Concrete, In: Beton T. K. S., Vol. 10, No. 1, Beton TKS, Prague, 2010.
- Henkensiefken, R.: Internal Curing in Cementitious Systems Made Using Saturated Lightweight Aggregate, MASTER'S Thesis, Purdue University, West Lafayette, IN, USA, 2008.
- Henkensiefken, R., Briatka, P., Bentz, D., Nantung, T., Weiss, J.: Plastic Shrinkage Cracking in Internally Cured Mixtures - Prewetted Lightweight Aggregate Can Reduce Cracking, In: Concrete International, Vol.: 32, No. 2, ACI, 2010.
- Lura, P.: Autogenous Deformation and Internal Curing of Concrete, PhD. Thesis, Delft University, Delft, 2003.
- Radlinska, A., et. al.: Shrinkage Mitigation Strategies in Cementitious Systems: A Closer Look at Differences in Sealed and Unsealed Behavior, In: Journal of the Transportation Research Board, Washington, 2008.
- Sant, G., Eberhardt, A., et al.: The influence of shrinkage reducing admixtures (SRAs) on moisture absorption in cementitious materials at early-ages, Journal of Materials in Civil Engineering, Vol. 22, No. 3, 2010, pp. 277-286.
- Wittmann, F. H.: On the Action of Capillary Pressure in Fresh Concrete, In: Cement and Concrete Research, Vol. 6, No. 1, 1976.
- EN 12620+A1:2008 - Aggregates for concrete.
- EN 13055-1:2002 - Lightweight aggregates. Lightweight aggregates for concrete, mortar and grout.
- EN 1097-3:1998 - Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids.
- EN 1097-6:2000 - Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption.
- EN 933-1:1997 - Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving method.