References
- Proton V., Alexis J., Andrieu E., Blanc C., Delfosse J., Lacroix L., Odemer G.: Influence of Post-Welding Heat Treatment on the Corrosion Behavior of a 2050-T3 Aluminum-Copper-Lithium Alloy Friction Stir Welding Joint. Journal of The Electrochemical Society 158 (5) (2011) C139-C147.
- Fonda R.W., Pao P.S., Jones H.N., Feng C.R., Connolly B.J., Davenport A.J.: Microstructure, mechanical properties, and corrosion of friction stir welded Al 5456. Materials Science and Engineering A 519 Issues 1-2 (2009) 1-8.
- Genevois C.: Genèse des microstructures lors du soudage par friction malaxage d'alliages d'aluminium de la série 2000 et 5000 et comportement mécanique resultant. PhD thesis, Institut National Polytechnique de Grenoble (2004).
- Zhou C., Yang X., Luan G.: Effect of root flaws on the fatigue property of friction stir welds in 2024-T3 aluminum alloys. Materials Science and Engineering A 418 (2006) 155-160.
- Jariyaboon M., Davenport A.J., Ambat R., Connolly B.J., Williams S.W., Price D.A.: The effect of welding parameters on the corrosion behaviour of friction stir welded AA2024-T351. Corrosion Science 49 (2007) 877-909.
- Cavaliere P., Cabibbo M., Panella F., Squillace A.: 2198 Al-Li plates joined by Friction Stir Welding: Mechanical and microstructural behavior. Materials and Design 30 (2009) 3622-3631
- Bousquet E., Puiggali M., Poulon-Quintin A., Devos O., Touzet M.: Correlation between microstructure, microhardness and corrosion sensitivity of AA 2024-T3 FSW weld-joints. In Eurocorr 2010 The European Corrosion Congress.
- Jata K.V., Semiatin S.L.: Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys. Scripta materialia 43 (2000) 743-749.
- Sutton M.A., Yang B., Reynolds A.P., Taylor R.: Microstructural studies of friction stir welds in 2024-T3 aluminum. Materials Science and Engineering A 323 (2002) 160-166.
- Fonda R.W., Bingert J.F.: Texture variations in an aluminum friction stir weld. Scripta Materialia 57 (2007) 1052-1055.
- Li J.F., Li C.X., Peng Z.W., Chen W.J., Zheng Z.Q.: Corrosion mechanism associated with T1 and T2 precipitates of Al-Cu-Li alloys in NaCl solution. Journal of Alloys and Compounds 460 (2008) 688-693.
- Miyamoto H., Ikeuchi K., Mimaki T.: The role of grain boundary plane orientation on intergranular corrosion of symmetric and asymmetric [1 1 0] tilt grain boundaries in directionally solidified pure copper. Scripta Materialia 50 (2004) 1417-1421.
- Kim S.H., Erb U., Aust K.T., Palumbo G.: Grain boundary character distribution and intergranular corrosion behavior in high purity aluminum. Scripta mater. 44 (2001) 835-839.
- Liu X., Frankel G.S., Zoofan B., Rokhlin S.I.: Effect of applied tensile stress on intergranular corrosion of AA2024-T3. Corrosion Science 46 (2004) 405-425.