References
- Bourne N.K.: On the collapse of cavities. Shock Waves 11 (2002), pp. 447-455.
- Philipp A., Lauterborn W.: Cavitation erosion by single laser-produced bubbles. J. Fluid Mech. 361 (1998), pp.75-116.
- Hammit F.G.: Cavitation and multiphase flow phenomena. McGraw-Hill Inc. 1980.
- Heymann F. J.: On the time dependence of the rate of erosion due to impingement or cavitation. ASTM 408, Baltimore 1967, pp. 70-100.
- Bogachev I.N., Mints R.I.: Cavitational erosion and means for its prevention. Israel program for Scientific Translations Ltd., Jerusalem 1966.
- Heathcock C.J., Protheroe B.E., Ball A.: Cavitation erosion of stainless steels. Wear 81 (1982), pp.311-327.
- Thiruvengadam A.: A unified theory of cavitation damage, Transactions of the ASME, Journal of Basic Engineering 85 (1963), pp.365-376.
- Iwai Y., Honda T., Yamaa H., Matsumura T., Larsson M., Hogmark S.: Evaluation of wear resistance of thin hard coatings by a new solid particle impact test. Wear (2001), pp. 861-867.
- Yoon S.Y., Yoon S.Y., Chung W.S., Kim K.H.: Impact-wear behaviors of TiN and Ti-Al-N coatings na AISI D2 steel and WC-Co substrates. Surface and Coating Technology 177-178 (2004), pp.645-650.
- Voevodin A.A., Bantle R., Matthews A.: Dynamic impact wear of TiCxNy and Ti-DLC composite coatings. Wear 185 (1995), pp.151-157.
- Cairney J.M., Tsukano R., Hoffman M.J., Yang M.: Degradation of TiN coating under cyclic loading. Acta Materialia 52 (2004), pp. 3229-3237.
- Ma L.W., Cairney J.M., Hoffman M., Munroe P.R.: Deformation mechanisms operating nanoindentation of TiN coatings on steel substrates. Surface & Coatings Technology 192 (2005), pp.11-18.
- Münsterer S., Kohlhof K.: Cavitation protection by low temperature TiCN coatings. Surface and Coatings Technology 74-75 (1995), pp. 642-647.
- Marynin V.H.: Erosion of vacuum-arc Ti-N coatings. Materials Science 39 (2003), pp. 447-451.
- Krella A., Czyżniewski A.: Influence of the substrate hardness on cavitation erosion resistance of TiN coating. Wear 263 (2007), pp. 395-401.
- Krella A., Czyżniewski A.: Investigation concerning the cavitation resistance of TiN coatings deposited on austenitic stainless steel at various temperatures. Wear 265 (2008), pp. 72-80.
- Leyland A., Matthews A.: On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimized tribological behaviour. Wear 246 (2000), pp. 1-11.
- Lima M.M., Godoy C., Modenesi P.J., Avelar-Batista J.C., Davoson A., Matthews A.: Coating fracture toughness determined by Vickers indentation: an important parameter in cavitation erosion resistance of WC-Co thermally sprayed coatings. Surface and Coating Technology 177-178 (2004), pp. 489-496.
- Han S., Lin J.H., Kuo J.J., He J.L., Shih H.C.: The cavitation-erosion phenomenon of chromium nitride coatings deposited using cathodic arc plasma deposition on steel. Surface and Coating Technology 161 (2002), pp. 20-25.
- Oliver W.C., Pharr G.M.: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7 (1992), pp. 1564-1583.
- Numachi F.: An experimental study of accelerated cavitation induced by ultrasonics. J. Basic Engineering 87 (1965), pp. 967-976.
- Ivany R.D., Hammit F.G.: Cavitation bubble collapse in viscous, compressible liquids - numerical analysis. J. Basic Engineering 87 (1965), pp. 977-984.
- Steller J., Krella A., Koronowicz J., Janicki J.: Towards quantitative assessment of material resistance to cavitation erosion. Wear 258 (2005), pp. 604-613.