References
- Lesiński K. J.: State of the art of underwater cutting and welding. Proceedings of conference "Problems of underwater cutting and welding", Gdańsk University of Technology, Gdańsk 1985 (in Polish).
- Lesiński K. J., Piątkowski T., Kiełczyński W.: Evaluation of quality of welds obtained by underwater welding - stage I. Report. Gdańsk University of Technology, Gdańsk 1989 (in Polish).
- Lesiński K. J.: Semiautomatic underwater cutting. Proceedings of conference "Problems of underwater cutting and welding", Gdańsk University of Technology, Gdańsk 1985 (in Polish).
- Cotton H. C.: Welding under water and in the splash zone - a review. Proceedings of the International Conference "Underwater Welding", Trondheim, Norway 1983.
- Grubbs C. E., Reynolds T. J.: Underwater welding: seeking high quality at greater depths.9/1998.
- Kononenko V. Ya.: Technologies of underwater wet welding and cutting. E. O. Paton Electric Welding Institute, Kiev, Ukraine 2000.
- Szelagowski P., Pachniuk I.: State of the art and practice of underwater hyperbaric dry welding. International workshop on underwater welding of marine structures. New Orleans, USA, 1994.
- Christensen N.: The metallurgy of underwater welding. Proceedings of the International Conference "Underwater Welding", Trondheim, Norway 1983.
- Grubbs C. E., Reynolds T. J.: State-of-the-art underwater wet welding - offshore oil fields.8/1998.
- Ibarra S., Grubbs C. E., Liu S.: State of the art and practice of underwater wet welding of steel. International workshop on underwater welding of marine structures. New Orleans, USA, 1994.
- Chigariev V. V., Ustinov A. V.: Design-experimental estimation of the possibility of reduction of the HAZ metal cooling rate in wet underwater welding.5/2000.
- Liu S., Pope A., Daemen R.: Welding consumables and weldability. International workshop on underwater welding of marine structures. New Orleans, USA, 1994.
- Pessoa E., Bracarense A., Zica E., Liu S., Guerrero F.: Porosity variation along multipass underwater wet welds and its influence on mechanical properties.179/2006.
- Rowe M., Liu S., Reynolds T. J.: The effect of ferro-alloy additions and depth on the quality of underwater wet welds.08/2002.
- Rowe M., Liu S.: Final report MT-CWJCR-099-032. Global Industries, 1999.
- Fydrych D.: Effect of welding conditions on susceptibility to cold cracking of welds obtained under water. Ph. D. thesis. Gdańsk University of Technology, Gdańsk 2005 (in Polish).
- Łabanowski J., Fydrych D.: Investigations of underwater welding processes. Report, Gdańsk University of Technology, Gdańsk 2008.
- Rogalski G.: Determination of welding thermal cycles during underwater welding. Proceedings of Doctorate Studies Conference, Gdańsk 2003 (in Polish).
- Lesiński K. J.: Technology of welding by local cavity process up to 200 m - stage I. Report. Gdańsk University of Technology, Gdańsk 1987.
- Lesiński K. J.: Technology of welding by local cavity process up to 200 m - stage II. Report. Gdańsk University of Technology, Gdańsk 1987.
- Zhang X., Ashida E., Shono S., Matsuda F.: Effect of shielding conditions of local dry cavity on weld quality in underwater Nd:YAG laser welding.174/2006.
- Gooch T. G.: Properties of underwater welds.1983, ‘Part 1 Procedural trials’ 15(3) 164-167; ‘Part 2 Mechanical properties’ 15(4) 206-215.
- Ibarra S.: Shallow underwater welding. International workshop on quality in underwater welding of marine structures. Golden, USA, 1985.
- Johnsen M. R.: Keeping shipshape through underwater welding.11/2001.
- Bohme D., Eisenbeis C.: Investigation into the credibility of the implant test when used to asses the cold cracking sensitivity of underwater wet welds. Proceedings of the International Conference "Welding Under Extreme Conditions", Helsinki, Finland 1989.
- Brink S. H., Boltje G. W.: Cold cracking susceptibility of welds obtained by wet underwater welding. Proceedings of the International Conference "Underwater Welding", Trondheim, Norway 1983.
- Fydrych D., Kozak T.: Effect of welding conditions on susceptibility to cold cracking of underwater welded joints. Proceedings of International Conference, Bremen 2006.
- Tasak E., Bal M.: Properties of wet welds obtained by covered electrodes./1985.
- Matsuda K., Masumoto I., Hasegawa M.: Study on the crack sensitivity of mild steel welded joint by underwater welding. Proceedings of the International Conference "Joining of Metals - 2", Helsingor, Denmark 1984.
- Ozaki H., Naiman J., Masubuchi K.: A study of hydrogen cracking in underwater steel welds.8/1977.
- Bailey N.: Weldability of ferritic steels. Abington Publishing, Abington Hall, Cambridge, England 1994.
- Butnicki S.: Weldability and brittleness of steel. Wydawnictwa Naukowo-Techniczne, Warszawa 1991 (in Polish).
- IIW Doc. IX-1970-00 Pokhodnya I. K., Shvachko V. I.: Physical nature of hydrogen-induced cold cracks in welded joints in structural steels.
- Fydrych D., Rogalski G.: Effect of shielded-electrode wet welding conditions on hydrogen content in deposited metal.2/2008.
- Kozak T., Fydrych D.: Weldability of constructional materials. Report BW 01469303, Gdańsk University of Technology, Gdańsk 2004.
- Kotecki D. J.: Hydrogen reconsidered.8/1992.
- Fydrych D., Rogalski G.: Investigations of underwater welding processes. Report BW, Gdańsk University of Technology, Gdańsk 2007.
- AWS D3.6M: 1999: Specification for underwater welding, American Welding Society, Miami, USA 1999.
Language: English
Page range: 11 - 22
Published on: Jan 20, 2009
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Related subjects:
© 2009 J. Łabanowski, D. Fydrych, G. Rogalski, published by Gdansk University of Technology
This work is licensed under the Creative Commons License.