References
- Kozak J. at al.: Experimental methods in fatigue assessment of materials and structures (in Polish) Vol. III, Wydawnictwo Naukowe Instytutu Technologii Eksploatacji (Publishing House of Operational Technology Institute, PIB, Radom, 2009
- Rosochowicz K.: Problems of fatigue cracks in ship hull structures (in Polish). Wyd. Okrętownictwo i Żegluga (Publishing House Shipbuilding and Shipping), Gdań sk, 2000.
- Fricke W.: Local Approaches for Fatigue Assessment of Marine Structures. Materials of Seminar, Germanischer Lloyd, Hamburg, 21-22 January 2008
- Mahmoud H.M., Dexter R.J.: Propagation rate of large cracks in stiffened panels under tension loading, Marine Structures 18, 2005
- Yamamoto Satoshi: Shipyard Experience in Structural Design of Double Hull Tankers-Past, Present and Future.- Tanker Structure Cooperative Forum (TSCF), Shipbuilders Meeting 2007
- Lodsberg I, Landet E.: Fatigue capacity of side longitudinals in floating structures. Marine Structure 18(2005)
- Kocań da S.: Fatigue fractures in metals (in Polish), WNT (Scientific Technical Publishing House), Warsaw, 1985
- Kubera S., Gó rski Z., Rosochowicz K., Jakubowski M.: Influence of material properties and technological factors on fatigue strength of ship structures (in Polish). Research reports, Ship Research Institute, Gdansk University of Technology, Gdansk, 1978
- Radaj D., Sonsino C. M., Fricke W.: Fatigue assessment of welded joints by local approaches. Woodhead Publishing Limited, 2006
- Gó rski Z., Kozak J.: Estimation of development of fatigue damage in a bilge corner of Ro-Ro ship. ASRANet Conference, Edinburgh, 2010.
- IACS: Common Structural Rules, 2008.
- Hobbacher A.F: The new IIW recommendations for fatigue assessment of welded joints and components- A comprehensive code recently updated. International Journal of Fatigue, Vol. 31, Is. 1, January 2009
- Stambauch K., Leeson D., Lawrence C., Hou Y.: Reduction of S-N Curves for Ship Structural Details. SSC-369, Ship Structural Committee, 1993
- Presentation of Gdansk University of Technology. Materials from Technical Meeting "RISPECT Project" - PARIS November 2009 http://www.rispect.org.uk
- Fricke W.: Fatigue Strength of Ship Structures, Part I. Germanischer Lloyd, Hamburg, 1997.
- Germanischer Lloyd: Rules for Classification and Construction, Part 1: Seagoing Ships, Chapter 1: Hull Structure. Germanischer Lloyd, Edition 2002.
- DNV: Fatigue assessment of ship structures. Classification Notes No 30.7, Det Norske Veritas, June 2010
- IIW: Recommendations for fatigue design of welded joints and components. IIW document XIII-1965-03 / XV-1127-03
- Lotsberg I., Larsen P.K.: Developments in Fatigue Design for Offshore Structures. Det Norske Veritas paper No. 2001-IL-44
- Niemi E.: Recommendations Concerning Stress Determination for Fatigue Analysis of Welded Components. Abington Publishing, Cambridge UK, 1995. Stavanger, June 2001.
- Hobbacher A.: Fatigue Design of Welded Joints and Components. IIW, Abington Publishing, Cambridge, 1996.
- Yagi J., at al.: Definition of Hot Spot Stress in Welded Plate Type Structure for Fatigue Assessment. IIW-XIII-1414-91, 1991.
- DNV: Fatigue Strength Analysis for Mobile Offshore Units. Classification Note No 30.2, Det Norske Veritas, 1984.
- Germanischer Lloyd: Rules and guidelines, V - analysis techniques, chapter2 - guidelines for fatigue strength analyses of ship structures. Hamburg:. Germanischer Lloyd, Edition 2004.
- Bureau Veritas: Fatigue Strength of Welded Ship Structures. Bureau Veritas, NI 393 DSM R00 E, September 1994.
- Radaj J.: Review of fatigue strength assessment of non-welded and welded structures based on local parameters. Int. Journal of Fatigue, No 3, 1996
- Maddox S.J.: Fitness for purpose assessment of misalignment in transverse butt welds subject to fatigue load. IIW XIII-1180-85, 1985.
- Proceedings of the 16th International Ship and Offshore Structures Congress, Vol. 1, Report of ISSC Committee III.2b-Fatigue and Fracture, 2006
- Proceedings of the 17th International Ship and Offshore Structures Congress, Vol. 1, Report of ISSC Committee III.2b-Fatigue and Fracture, 2009
- Crooker T.W.: Fracture mechanics fatigue design. Mechanical Engineering, June 1977
- Maddox S.J.: Calculating the fatigue strength design of welded joints using fracture mechanics. Metal Construction and BWJ, No 8, August 1970
- Nykanen T, Li X, Bjork T, Marquis G.: A parametric fracture mechanics study of welded joints with toe cracks and lack of penetration. Engineering Fracture Mechanics, 72, 2005.