On the modelling of aerodynamic force coefficients for over-shroud seals of turbine stages

Wojciech Włodarski; Krzysztof Kosowski

doi:10.2478/v10012-008-0048-y

.blurhash-client-img { display: none !important; }

On the modelling of aerodynamic force coefficients for over-shroud seals of turbine stages

Polish Maritime Research

Volume 16 (2009): Issue Special (January 2009)

By: Wojciech Włodarski and Krzysztof Kosowski

Open Access

|Jun 2010

Baskharone E. A., Hensel S. J.: Interrelated Rotordynamic Effects of Cylindrical and Conical Whirl of Annular Seal Rotors. Transactions of the ASME Journal of Tribology, July 1992, Vol 113
Open DOI Search in Google Scholar
Childs D. W., Shin Yoon-Shik: A design to increase the static stiffness of hole pattern stator gas seals. ASME Turbo Expo 2006: Power for Land, Sea and Air, Barcelona, Spain;
Open DOI Search in Google Scholar
Childs D. W.: Finite-length Solutions for Rotordynamic Coefficients of Turbulent Annular Seals. Transactions of the ASME Journal of Lubrication Technology, July 1983, Vol 105;
Open DOI Search in Google Scholar
D'Souza R. J., Childs D. W.: A comparasion of rotordynamic-coefficient predictions for annular honeycomb gas seals using three different friction-factor models. Transactions of the ASME Journal of Tribology, July 2002
Open DOI Search in Google Scholar
Ertas B., Gamal A., Vance J.: Rotordynamic Force Coefficients of Pocket Damper Seal. ASME Turbo Expo 2006: Power for Land, Sea and Air, May 8-11, 2006, Barcelona, Spain;
Search in Google Scholar
Holt Ch. G., D. W. Childs: Theory versus experiment for the rotordynamic impedances of the two hole-pattern-stator gas annular seals. Transactions of the ASME Journal of Tribology, January 2002
Open DOI Search in Google Scholar
Kanemori Y., Iwatsubo T.: Forces and Moments Due to Combined Motion of Conical and Cylindrical Whirls for a Long Seal. Transactions of the ASME Journal of Tribology, July 1994, Vol 116;
Open DOI Search in Google Scholar
Lindsey Todd W., Childs D. W.: The Effect on Converging an Diverging Axial Taper on the Rotordynamic Coefficients of Liquid Annular Pressure Seals: Theory Versus Experiment. Transactions of the ASME Journal of Vibrations and Acoustics, April 2000;
Search in Google Scholar
Nielsen K. K., Childs D. W., Myllerup C. M.: Experimental and Theoretical Comparison of Two Swirl Brake Designs. Transactions of the ASME Journal of Turbomachinery, April 2001, Vol. 123;
Open DOI Search in Google Scholar
Picardo A., D. W. Childs: Rotordynamic coefficients for a tooth-on-stator labirynth seal at 70 bar supply pressures: measurements versus theory and comparisons to a hole-pattern stator seal. Transactions of the ASME Journal of Engineering for Gas Turbines and Power, October 2005
Open DOI Search in Google Scholar
Schettel J., Deckner M., Kwanka K., Lüneburg B., Nordmann R.: Rotordynamic: Coefficients Of Labseals For Turbines-Comparing CFD Results With Experimental Data On A Comb-Grooved Labyrinth. ASME paper GT-2005-68732, Proceedings of ASME Turbo Expo, June 6 9 2005 -Reno Tahoe, Nevada USA;
Open DOI Search in Google Scholar
Simon F., Frěne J.: Static and Dynamic Characteristics of Turbulent Annular Eccentric Seals: Effect of Convergent-Tapered Geometry and Variable Fluid Properties. Transactions of the ASME Journal of Tribology, April 1989, Vol 111
Open DOI Search in Google Scholar
Simon F., Frěne J.: Analysis for Incompressible Flow in Pressure Seal. Transactions of the ASME Journal of Tribology, July 1992, Vol 114
Open DOI Search in Google Scholar
Staubly T., Bissing M.: Numerical parameter study of rotor side spaces. Proceedings of the Hydraulic Machinery and Systems, 21st IAHR Symposium, Lausanne, 9÷12 September, 2002.
Search in Google Scholar