References
- Alwi, H. and Edwards, C. (2008). Fault tolerant control using sliding modes with on-line control allocation, Automatica 44(7): 1859-1866.
- Angeli, D., Casavola, A. and Mosca, E. (2001). On feasible set-membership state estimators in constrained command governor control, Automatica 37(1): 151-156.
- Bemporad, A., Casavola, A. and Mosca, E. (1997). Nonlinear control of constrained linear systems via predictive reference management, IEEE Transactions on Automatic Control 42(3): 340-349.
- Blanke, M., Kinnaert, M., Lunze, J. and Staroswiecki, M. (2006). Diagnosis and Fault Tolerant Control, Control Systems Series, Springer-Verlag, London.
- Bordignon, K. (1996). Constrained Control Allocation for Systems with Redundant Control Effector, Ph.D. thesis, Virginia Polytechnic Institute & State University, Blacksburg, VA.
- Boussaid, B., Aubrun, C. and Abdelkrim, M. (2010). Fault adaptation based on reference governor, Proceedings of the IEEE Conference on Control and Fault Tolerant Systems, SyStol'10, Nice, France, pp. 257-262.
- Burken, J., Lu, P., Wu, Z. and Bahm, C. (2001). Two reconfigurable flight control design methods: Robust servomechanism and control allocation, Journal of Guidance, Control, and Dynamics 24(3): 482-493.
- Casavola, A., Papini, M. and Franz, G. (2006). Supervision of networked dynamical systems under coordination constraints, IEEE Transactions on Automatic Control 51(3): 421-437.
- Casavola, A., Franze, G. and Sorbara, M. (2007). Reference-offset governor approach for the supervision of constrained networked dynamical systems, Proceedings of the European Control Conference, Kos, Greece, pp. 7-14.
- Casavola, A. and Garone, E. (2010). Fault tolerant adaptive control allocation schemes for overactuated systems, International Journal of Robust and Nonlinear Control 20(17): 1958-1980.
- Cox, D. (1972). Regression models and life tables, Journal of the Royal Statistical Society, Series B 34: 187-220.
- Durham, W. (1993). Constrained control allocation, Journal of Guidance, Control, and Dynamics 16(4): 717-125.
- Enns, D. (1998). Control allocation approaches, AIAA Guidance, Navigation, and Control Conference, Boston, VA, USA, pp. 98-108.
- Gertsbakh, I. (2000). Reliability Theory with Applications to Preventive Maintenance, Springer-Verlag, New York, NY.
- Gilbert, E., Kalmanovsky, I. and Tan, K. (1995). Discrete-time reference governors and the nonlinear control of systems with state and control constraints, International Journal on Robust and Nonlinear Control 5(5): 487-504.
- Gilbert, E. and Tan, K. (1991). Linear systems with state and control constraints: The theory and application of maximal output admissible sets, IEEE Transactions on Automatic Control 36(9): 1008-1020.
- Guenab, F., Theilliol, D., Weber, P., Zhang, Y. and Sauter, D. (2006). Fault tolerant control design: A reconfiguration strategy based on reliability analysis under dynamic behavior constraints, Proceedings of 6th IFAC Safeprocess Symposium, Beijing, China, pp. 1033-1038.
- Harkegard, O. (2003). Backstepping and Control Allocation with Applications to Flight Control, Ph.D. thesis, Linköping University, Linköping.
- Harkegard, O. and Glad, S. (2005). Resolving actuator redundancyoptimal control vs. control allocation, Automatica 41(1): 137-144.
- Johansen, T. and Johansen, T. A. (2008). Adaptive control allocation, Automatica 44(11): 2754-2765.
- Kawakernaak, H. and Sivan, R. (1972). Linear Optimal Control Systems, Wiley-Interscience, New York, NY.
- Khelassi, A., Theilliol, D. and Weber, P. (2009). Reconfigurability for reliable fault-tolerant control design, 7th Workshop on Advanced Control and Diagnosis, Zielona Góra, Poland.
- Kolmanovsky, I. and Sun, J. (2006). Parameter governors for discrete-time nonlinear systems with pointwise-in-time state and control constraints, Automatica 42(5): 841-848.
- Martorell, S., Sanchez, A. and Serradell, V. (2009). Agedependent reliability model considering effects of maintenance and working conditions, Reliability Engineering and System Safety 64(1): 19-31.
- Noura, H., Theilliol, D., Ponsart, J. and Chamssedine, A. (2009). Fault Tolerant Control Systems: Design and Practical Application, Springer, Dordrecht/Heidelberg/London.
- Staroswiecki, M. (2003). Actuator faults and the linear quadratic control problem, Proceedings of the 42th IEEE Conference on Decision and Control, Maui, HI, USA, pp. 959-965.
- Theilliol, D., Chemsseddine, A., Zhang, Y. and Weber, P. (2009). Optimal reconfigurable control allocation design based on reliability analysis, 7th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, Barcelona, Spain, (on CD-ROM).
- Theilliol, D., Join, C. and Zhang, Y. (2008a). Actuator fault tolerant control design based on a reconfigurable reference input, International Journal of Applied Mathematics Computer Science 18(4): 553-560, DOI: 10.2478/v10006-008-0048-1.
- Theilliol, D., Zhang, Y., Ponsart, J. and Aubrun, C. (2008b). Actuator fault tolerant control system with re-configuring reference input design based on MPC, Proceedings of the 6th Workshop on Advanced Control and Diagnosis, Coventry, UK, pp. 275-280.
- Virnig, J. and Bodden, D. (1994). Multivariable control allocation and control law conditioning when control effectors limits, AIAA Guidance, Navigation, and Control Conference, Scottsdale, AZ, USA, pp. 572-582.
- Zhang, Y., Suresh, V., Jiang, B. and Theilliol, D. (2007). Reconfigurable control allocation against aircraft control effector failures, IEEE International Conference on Control Applications, CCA 2007, Singapore, pp. 1197-1202.
- Zhou, K., Doyle, J. and Glover, K. (1996). Robust and Optimal Control, Prentice Hall, Upper Saddle River, NJ.