References
- Baldi, P., Castaldi, P. and Simani, S. (2010). Fault diagnosis and control reconfiguration in Earth satellite model engines, Proceedings of the 9th UKACC International Conference on Control (CONTROL 2010), Coventry, UK, pp. 1-6.
- Benini, B., Castaldi, P. and Simani, S. (2009). Fault Diagnosis for Aircraft System Models: An Introduction from Fault Detection to Fault Tolerance, 1st Edn., VDM Verlag Dr. Muller, Saarbrucken.
- Bertoni, G., Bertozzi, N., Castaldi, P. and Simani, S. (2010a). A nonlinear guidance and active fault tolerant control system for a fixed wing unmanned aerial vehicle, Proceedings of the 2010 American Control Conference—ACC2010, Baltimore, MD, USA, pp. 1-6.
- Bertoni, G., Castaldi, P., Mimmo, N. and Simani, S. (2010b). Active fault tolerant control system for a high accuracy planet-image satellite, Proceedings of the 18th IFAC Symposium on Automatic Control in Aerospace—ACA2010, Nara, Japan, pp. 1-6.
- Blanke, M., Kinnaert, M., Lunze, J. and Staroswiecki, M. (2006). Diagnosis and Fault-Tolerant Control, Springer-Verlag, Berlin.
- Bonfè, M., Castaldi, P., Geri, W. and Simani, S. (2007). Nonlinear actuator fault detection and isolation for a general aviation aircraft, Space Technology—Space Engineering, Telecommunication, Systems Engineering and Control 27(2-3): 107-113.
- Castaldi, P., Geri, W., Bonfè, M., Simani, S. and Benini, M. (2010). Design of residual generators and adaptive filters for the FDI of aircraft model sensors, Control Engineering Practice 18(5): 449-495, DOI:10.1016/j.conengprac.2008.11.006.
- Chen, J. and Patton, R.J. (1999). Robust Model-Based Fault Diagnosis for Dynamic Systems, Kluwer Academic Publishers, Norwell, MA.
- De Persis, C. and Isidori, A. (2001). A geometric approach to non-linear fault detection and isolation, IEEE Transactions on Automatic Control 45(6): 853-865.
- Ding, S.X. (2008). Model-based Fault Diagnosis Techniques: Design Schemes, Algorithms, and Tools, 1st Edn., Springer, Berlin/Heidelberg.
- Edwards, C. (2004). A practical method for the design of sliding mode controllers using linear matrix inequalities, Automatica 40(10): 1761-1769.
- Edwards, C., Lombaerts, T. and Smaili, H. (Eds.) (2010). Fault Tolerant Flight Control: A Benchmark Challenge, 1st Edn., Lecture Notes in Control and Information Sciences, Vol. 399, Springer, Heidelberg/Berlin.
- Edwards, C. and Spurgeon, S. (1998). Sliding Mode Control: Theory and Applications, 1st Edn., Taylor & Francis, London.
- Ioannou, P. and Sun, J. (1996). Robust Adaptive Control, PTR Prentice-Hall, Upper Saddle River, NJ.
- Isermann, R. (2005). Fault-Diagnosis Systems: An Introduction from Fault Detection to Fault Tolerance, 1st Edn., Springer-Verlag, Heidelberg/Berlin,.
- KaboréeA, P., Othman, S., McKenna, T. and Hammouri, H. (2000). An observer-based fault diagnosis for a class of nonlinear systems—Application to a free radical copolymerization reaction, International Journal of Control 73(9): 787-803.
- KaboréeA, P. and Wang, H. (2001). Design of fault diagnosis filters and fault tolerant control for a class of nonlinear systems, IEEE Transactions on Automatic Control 46(11): 1805-1810.
- Korbicz, J., Koscielny, J. M., Kowalczuk, Z. and Cholewa, W. (Eds.) (2004). Fault Diagnosis: Models, Artificial Intelligence, Applications, 1st Edn., Springer-Verlag, Heidelberg/Berlin.
- Li, H., Zhao, Q. and Yang, Z. (2007). Reliability modeling of fault tolerant control systems, International Journal of Applied Mathematics and Computer Science 17(4): 491-504, DOI: 10.2478/v10006-007-0041-0.
- Mahmoud, M., Jiang, J. and Zhang, Y. (2003). Active Fault Tolerant Control Systems, Springer-Verlag, Heidelberg/Berlin.
- Marcos, A., Ganguli, S. and Balas, G.J. (2005). An application of H∞ fault detection and isolation to a transport aircraft, Control Engineering Practice 13(1): 105-119.
- Noura, H., Theilliol, D., Ponsart, J.-C. and Chamseddine, A. (2009). Fault-tolerant Control Systems: Design and Practical Applications, 1st Edn. Advances in Industrial Control, Vol. 1, Springer, London.
- Rodrigues, M., Theilliol, D., Aberkane, S. and Sauter, D. (2007). Fault tolerant control design for polytopic LPV systems, International Journal of Applied Mathematics and Computer Science 17(1): 27-37, DOI: 10.2478/v10006-007-0004-5.
- Simani, S., Fantuzzi, C. and Patton, R.J. (2003). Model-Based Fault Diagnosis in Dynamic Systems Using Identification Techniques, Advances in Industrial Control, Vol. 1, Springer-Verlag, London.
- Slotine, J.-J. and Sastry, S. (1983). Tracking control of non-linear systems using sliding surfaces, with application to robot manipulators, International Journal of Control 38(2): 465-492.
- Su, C.-Y. and Stepanenko, Y. (1994). Adaptive sliding mode control of robot manipulators: General sliding manifold case, Automatica 30(9): 1497-1500.
- Theilliol, D., Join, C. and Zhang, Y. (2008). Actuator fault tolerant control design based on a reconfigurable reference input, International Journal of Applied Mathematics and Computer Science 18(4): 553-560, DOI: 10.2478/v10006-008-0048-1.
- Utkin, V. (1977). Variable structure systems with sliding mode, IEEE Transactions on Automatic Control AC-22(2): 212-222.
- Utkin, V. (1992). Sliding Modes in Control Optimization, Springer-Verlag, Heidelberg/Berlin.
- Utkin, V.I., Guldner, J. and Shi, J. (1999). Sliding Mode Control in Electromechanical Systems, 1st Edn., Series in Systems & Control Engineering, Taylor & Francis, London.
- Witczak, M. (2007). Modelling and Estimation Strategies for Fault Diagnosis of Non-Linear Systems: From Analytical to Soft Computing Approaches, 1st Edn., Lecture Notes in Control & Information Sciences, Vol. 354, Springer-Verlag, Berlin/Heidelberg.
- Zhang, Y. and Jiang, J. (2008). Bibliographical review on reconfigurable fault-tolerant control systems, Annual Reviews in Control 32(2): 229-252.