Actuator Fault Tolerance in Control Systems with Predictive Constrained Set-Point Optimizers

Marusak, Piotr; Tatjewski, Piotr

doi:10.2478/v10006-008-0047-2

Abstract

Mechanisms of fault tolerance to actuator faults in a control structure with a predictive constrained set-point optimizer are proposed. The structure considered consists of a basic feedback control layer and a local supervisory set-point optimizer which executes as frequently as the feedback controllers do with the aim to recalculate the set-points both for constraint feasibility and economic performance. The main goal of the presented reconfiguration mechanisms activated in response to an actuator blockade is to continue the operation of the control system with the fault, until it is fixed. This may be even long-term, if additional manipulated variables are available. The mechanisms are relatively simple and consist in the reconfiguration of the model structure and the introduction of appropriate constraints into the optimization problem of the optimizer, thus not affecting the numerical effectiveness. Simulation results of the presented control system for a multivariable plant are provided, illustrating the efficiency of the proposed approach.

References

Bemporad A., Borrelli F. and Morari M. (2000a). Optimal controllers for hybrid systems: Stability and piecewise linear explicit form, Proceedings of the 39-th IEEE Conference on Decision and Control, Sydney, Australia, pp. 1810-1815.
Search in Google Scholar
Bemporad A., Ferrari-Trecate G. and Morari M. (2000b). Observability and controllability of piecewise affine and hybrid systems, IEEE Transactions on Automatic Control 45(10): 1864-1876.10.1109/TAC.2000.880987
Search in Google Scholar
Bemporad A., Morari M., Dua V. and Pistikopoulos E. (2002). The explicit linear-quadratic regulator for constrained systems, Automatica 38(1): 3-20.10.1016/S0005-1098(01)00174-1
Search in Google Scholar
Biswas P., Grieder P., Löfberg J. and Morari M. (2005). A survey on stability analysis of discrete-time piecewise affine systems, Proceedings of the IFAC World Congress, Prague, Czech Republic, CD-ROM, paper no. Th-E12-TO/1.
Search in Google Scholar
Blanke M., Kinnaert M., Lunze J. and Staroswiecki M. (2006). Diagnosis and Fault-Tolerant Control, Springer-Verlag, Berlin.
Search in Google Scholar
Blevins T., McMillan G., Wojsznis W. and Brown M. (2003). Advanced Control Unleashed, ISA - The Instrumentation, Systems, and Automation Society, Research Triangle Park.
Search in Google Scholar
Camacho E. and Bordons C. (1999). Model Predictive Control, Springer-Verlag, London.10.1007/978-1-4471-3398-8
Search in Google Scholar
Jones C., Kerrigan E. and Maciejowski J. (2007). Lexicographic perturbation for multiparametric linear programming with applications to control, Automatica 43(10): 1808-1816.10.1016/j.automatica.2007.03.008
Search in Google Scholar
Kassmann D., Badgwell T. and Hawkins R. (2000). Robust steady-state target calculation for model predictive control, AIChE Journal 46(5): 1007-1024.10.1002/aic.690460513
Search in Google Scholar
Kerrigan E. and Maciejowski J. (2004). Feedback min-max model predictive control using a single linear program: Robust stability and the explicit solution, International Journal of Robust and Nonlinear Control 14(4): 395-413.10.1002/rnc.889
Search in Google Scholar
Korbicz J., Kościelny J., Kowalczuk Z. and Cholewa W. (2004). Fault Diagnosis: Models, Artificial Intelligence, Applications, Springer-Verlag, Berlin.10.1007/978-3-642-18615-8
Search in Google Scholar
Kościelny J. (2001). Diagnosis of Automated Industrial Processes, Academic Publishing House EXIT, Warsaw (in Polish).
Search in Google Scholar
Ławryńczuk M., Marusak P. and Tatjewski P. (2007a). Multilayer and integrated structures for predictive control and economic optimisation, Proceedings of the 11-th IFAC/IFORS/IMACS/IFIP Symposium on Large Scale Systems: Theory and Applications, Gdańsk, Poland, CD-ROM, paper no. 60.
Search in Google Scholar
Ławryńczuk M., Marusak P. and Tatjewski P. (2007b). Set- point optimisation and predictive constrained control for fast feedback controlled processes, Proceedings of the 13-th IEEE/IFAC International Conference on Methods and Models in Automation and Robotics MMAR 2007, Szczecin, Poland, pp. 357-362.
Search in Google Scholar
Lunze J. and Schröder J. (2004). Sensor and actuator fault diagnosis of systems with discrete inputs and outputs, IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics 34(2): 1096-1107.10.1109/TSMCB.2003.820593
Search in Google Scholar
Lunze J. and Steffen T. (2006). Control reconfiguration after actuator failures using disturbance decoupling methods, IEEE Transactions on Automatic Control 51(10): 1590-1601.10.1109/TAC.2006.882938
Search in Google Scholar
Lunze J. and Supavatanakul P. (2002). Timed discrete-event method for diagnosis of industrial actuators, Proceedings of the IEEE International Conference on Industrial Technology, Bangkok, Thailand, pp. 1354-1359.
Search in Google Scholar
Maciejowski J. (2002). Predictive Control with Constraints, Prentice Hall, Harlow.
Search in Google Scholar
Marusak P. (2006). Predictive control algorithms in constrained control systems tolerating sensor faults, Proceedings of the 12-th IEEE International Conference on Methods and Models in Automation and Robotics MMAR 2006, Międzyzdroje, Poland, pp. 797-804.
Search in Google Scholar
Marusak P. (2007a). Actuator fault toleration in control systems with analytical predictive controllers and output constraints, Proceedings of the 13-th IEEE/IFAC International Conference on Methods and Models in Automation and Robotics MMAR 2007, Szczecin, Poland, pp. 825-832.
Search in Google Scholar
Marusak P. (2007b). Predictive controllers integrated with economic optimization tolerating actuator faults: Application to a nonlinear plant, in J. Korbicz, K. Patan and M. Kowal (Eds), Fault Diagnosis and Fault Tolerant Control, Academic Publishing House EXIT, Warsaw, pp. 173-185.
Search in Google Scholar
Marusak P. and Tatjewski P. (2004). Predictive control algorithms in systems tolerating actuator faults, Proceedings of the 10-th IEEE International Conference on Methods and Models in Automation and Robotics MMAR 2004, Międzyzdroje, Poland, pp. 1355-1360.
Search in Google Scholar
Mayne D., Rawlings J., Rao C. and Scokaert P. (2000). Constrained model predictive control: Stability and optimality, Automatica 36(6): 789-814.10.1016/S0005-1098(99)00214-9
Search in Google Scholar
Mignone D., Ferrari-Trecate G. and Morari M. (2000). Stability and stabilization of piecewise affine and hybrid systems: An LMI approach, Proceedings of the 39-th IEEE Conference on Decision and Control, Sydney, Australia, pp. 504-509.
Search in Google Scholar
Newell R. and Lee P. (1989). Applied Process Control - A Case Study, Prentice Hall, London.
Search in Google Scholar
Qin S. and Badgwell T. (2003). A survey of industrial model predictive control technology, Control Engineering Practice 11(7): 733-764.10.1016/S0967-0661(02)00186-7
Search in Google Scholar
Richter J., Schlage T. and Lunze J. (2007). Control reconfiguration of a thermofluid process by means of a virtual actuator, IET Control Theory and Applications 1(6): 1606-1620.10.1049/iet-cta:20060506
Search in Google Scholar
Rossiter J. (2003). Model-Based Predictive Control, CRC Press, Boca Raton, FL.
Search in Google Scholar
Staroswiecki M., Yang H. and Jiang B. (2007). Progressive accommodation of parametric faults in linear quadratic control, Automatica 43(12): 2070-2076.10.1016/j.automatica.2007.04.016
Search in Google Scholar
Tatjewski P. (2007). Advanced Control of Industrial Processes; Structures and Algorithms, Springer-Verlag, London.
Search in Google Scholar
Tondell P., Johansen T. and Bemporad A. (2003). An algorithm for multiparametric quadratic programming and explicit MPC solutions, Automatica 39(3): 489-497.10.1016/S0005-1098(02)00250-9
Search in Google Scholar
Tvrzska de Gouvea M. and Odloak D. (1998). One-layer real time optimization of LPG production in the FCC unit: Procedure, advantages and disadvantages, Computers and Chemical Engineering 22(Supplement 1): S191-S198.10.1016/S0098-1354(98)00054-4
Search in Google Scholar
Venkatasubramanian V., Rengaswamy R., Yin K. and Kavuri S. (2003). A review of process fault detection and diagnosis, Computers and Chemical Engineering 27(3): 293-346.10.1016/S0098-1354(02)00162-X
Search in Google Scholar
Yen G. and Ho L. (2003). Online multiple-model-based fault diagnosis and accommodation, IEEE Transactions on Industrial Electronics 50(2): 296-312.10.1109/TIE.2003.809390
Search in Google Scholar
Zanin A., de Gouvea M. T. and Odloak D. (2000). Industrial implementation of a real-time optimization strategy for maximizing production of LPG in a FCC unit, Computers and Chemical Engineering 24(2-7): 525-531.10.1016/S0098-1354(00)00524-X
Search in Google Scholar
Zanin A., de Gouvea M. T. and Odloak D. (2002). Integrating real-time optimization into the model predictive controller of the FCC system, Control Engineering Practice 10(8): 819-831.10.1016/S0967-0661(02)00033-3
Search in Google Scholar
Zhang Y. (2007). Active fault-tolerant control systems: Integration of fault diagnosis and reconfigurable control, in J. Korbicz, K. Patan and M. Kowal (Eds), Fault Diagnosis and Fault Tolerant Control, Academic Publishing House EXIT, Warsaw, pp. 21-41.10.1016/B978-008044485-7/50242-6
Search in Google Scholar

Actuator Fault Tolerance in Control Systems with Predictive Constrained Set-Point Optimizers

Abstract

Paradigm

My account