References
- Balas G., Packard A., Renfrow J., Mullaney C., and M'Closkey R. (1998): Control of the F-14 aircraft lateral-directional axis during powered approach. Journal of Guidance, Control, and Dynamics, Vol. 21, No. 6, pp. 899-908.
- Blanke M. (1996): Consistent design of dependable control systems. Control Engineering Practice, Vol. 4, No. 9, pp. 1305-1312.
- Blanke M., Staroswiecki M. and Wu N.E. (2001): Concepts and methods in fault-tolerant control. Proceedings of American Control Conference, Arlington, USA, pp. 2606-2620.
- Bonivento C., Capiluppi M., Marconi L., Paoli A. and Rossi C. (2006): Reliability evaluation for fault diagnosis in complex systems. Proceedings of SAFEPROCESS, Beijing, China, pp. 1405-1410.
- Ciardo G., Marie R., Sericola B. and Trivedi K. (1990): Performability analysis using semi-Markov reward processes. IEEE Transactions on Computers, Vol. 39, No. 10, pp. 1251-1264.
- çinlar, E. (1975): Introduction to Stochastic Processes. Englewood Cliffs: Prentice-Hall.
- Figueras J., Vicencc P. and Quevedo J. (2006): Multiple fault diagnosis system design using reliability analysis: Application to Barcelona rain-gauge network. Proceedings of SAFEPROCESS, Beijing, China, pp. 1399-1404.
- Guenab F., Theilliol D., Weber P., Ponsart J., and Sauter D. (2005): Fault tolerant control method based on cost and reliability analysis. Proceedings of the 16th IFAC World Congress, Prague, Czech Republic, (on DVD).
- Guenab F., Theilliol D., Weber P., Zhang Y.M., and Sauter D. (2006): Fault tolerant control system design: A reconfiguration strategy based on reliability analysis under dynamic behavior constraints. Proceedings of SAFEPROCESS, Beijing, China, pp. 1387-1362.
- Harrison J., Daly K. and Gai E. (1981): Reliability and accuracy prediction for a redundant strapdown navigator. Journal of Guidance and Control, Vol. 4, No. 5, pp. 523-529.
- Jiang J. and Zhang Y.M. (2006): Accepting performance degradation in fault-tolerant control system design. IEEE Transactions on Control Systems Technology, Vol. 14, No. 2, pp. 284-292.
- Li H. and Zhao Q. (2007): Probabilistic design of fault tolerant control via parametrization. Circuits, Systems, and Signal Processing, (in press).
- Li H. and Zhao Q. (2006): Reliability evaluation of fault tolerant control systems with a semi-Markov FDI model. Proceedings of SAFEPROCESS, Beijing, China, pp. 1381-1386.
- Limnios N., and Oprisan G. (2001): Semi-Markov Processes and Reliability. Boston: Birkhäuser.
- Mahmoud M., Jiang J. and Zhang Y. (2003): Active Fault-Tolerant Control Systems: Stochastic Analysis and Synthesis. Berlin: Springer-Verlag.
- Mariton M. (1989): Detection delays, false alarm rates and the reconfiguration of control systems. International Journal of Control, Vol. 49, No. 3, pp. 981-992.
- Patton R. (1997): Fault-tolerant control systems: The 1997 situation. Proceedings of SAFEPROCESS, Kingston Upon Hull, UK, pp. 1033-1054.
- Patton R., Uppal F., Simani S. and Polle B. (2006): A Monte Carlo analysis and design for FDI of a satellite attitude control system. Proceedings of Safeprocess, Beijing, China, pp. 1393-1398.
- Polyak B.T. and Tempo R. (2001): Probabilistic robust design with linear quadratic regulators. Systems and Control Letters, Vol. 43, pp. 343-353.
- Ross S.M. (2002): Introduction to Probability Models, 8th Ed. San Diego: Academic Press.
- Schrick D. and Müller P. (2000): Reliability models for sensor fault detection with state-estimator schemes. In: Issues of Fault Diagnosis for Dynamic Systems (R. Patton, P. Frank, and R. Clark, Eds.), London: Springer-Verlag.
- Shin K. and Kim H. (1992): Derivation and application of hard deadlines for real-time control systems. IEEE Transactions on Systems, Man and Cybernetics, Vol. 22, No. 6, pp. 1403-1412.
- Spencer B., Sain M., Won C., Kaspari D. and Sain P. (1994): Reliability-based measures of structural control robustness. Structural Safety, Vol. 15, No. 1-2, pp. 111-129.
- Srichander R. and Walker B. (1993): Stochastic stability analysis for continuous-time fault tolerant control systems. International Journal of Control, Vol. 57, No. 2, pp. 433-452.
- Tempo R., Bai E. and Dabbene F. (1997): Probabilistic robustness analysis: Explicit bounds for the minimum number of samples. Systems and Control Letters, Vol. 30, No. 5, pp. 237-242.
- Walker B. (1997): Fault tolerant control system reliability and performance prediction using semi-Markov models. Proceedings of Safeprocess, Kingston Upon Hull, UK, pp. 1053-1064.
- Walker B. (1989): Fault detection threshold determination using Markov theory, In: Fault Diagnosis in Dynamic Systems: Theory and Application (R. Patton, P. Frank, and R. Clark, Eds.), Upper Saddle River: Prentice Hall.
- Wu N. E. (2001): Reliability of fault tolerant control systems: Part I and II. Proceedings of the 40th IEEE Conference on Decision and Control, Orlando, USA, pp. 1460-1471.
- Wu N.E. and Patton R. (2003): Reliability and supervisory control. Proceedings of SAFEPROCESS, Washington, (on CD-ROM).
- Wu N. E. (2004): Coverage in fault-tolerant control. Automatica, Vol. 40, No. 4, pp. 537-548.
- Wu N.E. and Thavamani S. (2006): Effect of acknowledgement on performance of a fault-tolerant wireless network. Proceedings of SAFEPROCESS, Beijing, China, pp. 1411-1416.
- Yaesh I., Boyarski S. and Shaked U. (2003): Probability-guaranteed robust H∞ performance analysis and state-feedback design. Systems and Control Letters, Vol. 48, No. 5, pp. 351-364.
- Zhang Y.M. and Jiang J. (2001): Integrated active fault-tolerant control using IMM approach. IEEE Transactions on Aerospace and Electronic Systems, Vol. 37, No. 4, pp. 1221-1235.