References
- Caban, J. et al. 2016 The research on ageing of glycol - based brake fluids of vehicles in operation. In: Advacnec in Science and Technology - Research Journal. Vol: 10, pp: 9 - 16, DOI: 10.12913/22998624/65113.
- Gigan, L. 2017 Improvement in the brake disc design for heavy vehicles by parametric evaluation. In: Proceedings of the institution of mechanical engineers part D - journal of automobile angineering. Vol: 231, pp: 1989 - 2004, DOI: 10.1177/0954407016688421.10.1177/0954407016688421
- Guney, B., Mutlu, I., Gayretli, A. 2016 Investigation of braking performance of NiCrBSi coated brake discs by flame spraying. In: Journal of the Balkan Tribological Association, vol: 22, pp: 887 - 903.
- Haugland, O. 2013 Car stopping distance on a tabletop. In: Physics teacher, Vol: 51, pp: 268 - 268.
- Ondruš, J., Hockicko P. 2015 Braking deceleration measurement using the video analysis of motions by Sw tracker. In: Transport and Telecommunication, Vol: 16, pp: 127 - 137.
- Jammes, Y. et al. 2017 Emergency braking is affected by the use of cruise control. In: Traffic Injury Prevention, Vol: 18, pp: 636 - 641, DOI: 10.1080/15389588.2016.1274978.10.1080/15389588.2016.127497828118033
- Lagel, M. et al. 2016 Automotive brake pads made with a bioresin matrix. In: Industrial Crops and Products, Vol: 85, pp: 372 - 381, DOI: 10.1016/j.indcrop.2015.12.090.10.1016/j.indcrop.2015.12.090
- Lazeet, D. et al. 2016 Analysis of truck braking system in terms of construction and operation. In: Acta technica napocensis series - aplied mathematics mechanics and engineering, Vol: 59, pp:209 - 218.
- Li, E. et al. 2013 Influences of initial braking velocity and passenger capacity on Mean Fully Developed Deceleration. In: Mechanical engineering an materials, Vol: 281, pp: 201. DOI: 10.4028/www.scientific.net/AMM.281.201.10.4028/www.scientific.net/AMM.281.201
- Li, W. et al. 2013 Vehicle Braking Efficiency On-Line Monitoring and Evaluation with MFDD. In: Advances designs and researches for manufacturing, PTS 1-3, Vol: 605 - 607, pp_ 968, DOI: 10.4028/www.scientiAMR.605-607.968.10.4028/www.scientiAMR.605-607.968
- Metz, L. 2016 Friction on Polished vs. Newly Re-Rocked Oiland- Chip Roadway Surfaces. In: SAE international journal of passenger cars - mechanical systems. Vol: 9, pp: 541 - 545, DOI: 10.4271/2016-01-1568.10.4271/2016-01-1568
- Mikušová, M. 2017 Crash avoidance systems and collision safety devices for vehicle occupants. In: Dynamics of civil engineering and transport structures and wind engineering. Vol: 107, DOI: 10.1051/matecconf/201710700024.10.1051/matecconf/201710700024
- Oyetubo, A., Afolabi, O., Ohida, M. 2018 Analysis of Road Traffic Safety in Minna Niger State, Nigeria. In: Logistics & Sustainable Transport, 9(1), pp. 23-38. DOI:10.2478/jlst-2018-0003.10.2478/jlst-2018-0003
- Paraskevadakis, D. et al. 2016 The impact of transport infrastructure projects on sustainable development within a major logistics gateway in North West England. In: Logistics & Sustainable Transport, 7(1), pp. 28-40. DOI:10.1515/jlst-2016-0003.10.1515/jlst-2016-0003
- Rievaj, V. et al. 2013 Tire inflation pressure influence on a vehicle stopping distances. In: International Journal of Traffic and Transportation Engineering. Vol: 2 pp: 9 - 13 Doi:10.5923/j.ijtte.20130202.01.10.5923/j.ijtte.20130202.01
- Rievaj, V., Mokričková, Synák, F. 2017 Temperature of the brakes and the braking force In: Transport and communications : scientific journal.. - Vol. 5, no. 1, pp: 16 - 16, ISSN 1339-5130.
- Selig, M. et al. 2012 The influence of tyre contact patch and on the stopping distance of automotive vehicles. In: 25th International Congress on Condition Monitoring and Diagnostic Engineering (COMADEM), Vol: 364, DOI: 10.1088/1742-6596/364/1/012014.10.1088/1742-6596/364/1/012014
- Timur, M., Kuscu, H., Toylan H. 2017 Design and manufacture of automated controlled test machine detecting braking characteristic of brake lining in vehicles. In: Proceedings of the institution of mechanical engineers part C - Journal of mechanical engineering science. Vol: 231, pp: 3318 - 3329, DOI: 10.1177/0954406216645128.10.1177/0954406216645128
- Vrábel, J. et al. 2017 Influence of Emergency Braking on Changes of the Axle Load of Vehicles Transporting Solid Bulk Substrates. In: Transbaltica 2017: Transportation and technology, Vol: 187, pp: 89 - 99, DOI: 10.1016/j.proeng.2017.04.354.10.1016/j.proeng.2017.04.354
- Zamzamzadeh, M. et al. 2016 Dynamic simulation of brake pedal force effect on heavy vehicle braking distance under wet road conditions. In: International Journal of Automotive and Mechanical Engineering, Vol: 13, pp: 3555 - 3563, DOI: 10.15282/ijame.13.3.2016.2.0292.10.15282/ijame.13.3.2016.2.0292
- Zhang, L. et al. 2016 All-Wheel Braking Force Allocation During a Braking-in-Turn Maneuver for Vehicles With the Brake-by-Wire System Considering Braking Efficiency and Stability. In: IEFE Transactions on Vehicular Technology, Vol: 265, pp: 4752 - 4767, DOI: 10.1007/978-3-319-24577-5_17.10.1007/978-3-319-24577-5_17
- Zhao, L. 2014 Vehicle Braking Stability Analysis in Turn Condition. In: Machines Design and manufacturing Engineering III, pp: 604 - 607, llos, A., Al-Hadithi, M., 1992. Driver behaviour during onset of amber at signalised junctions. Traffic Engineering and Control 33 (5), 312e317.