Modelling of the Monolithic Stiffener Forming Process from a Paek Thermoplastic Composite Matrix Using Pam-Form Software

Polański, Witold

Modelling of the Monolithic Stiffener Forming Process from a Paek Thermoplastic Composite Matrix Using Pam-Form Software

Transactions on Aerospace Research

Volume 2023 (2023): Issue 2 (June 2023)

By:

Witold Polański

Open Access

|Jun 2023

References

Dutta, A., Niemeyer, M. and Cakmak, M. “Thermoforming of Advanced Thermoplastic Composites. I: Single Curvature Elements.” Polymer Composites Vol. 12 (1991): pp. 257–272. DOI 10.1002/pc.750120407.
Open DOI Search in Google Scholar Back to article
Muzzy, J.D., Wu, X. and Colton, J.S. “Thermoforming of High Performance Thermoplastic Composites.” Polymer Composites Vol. 11 (1990): pp. 280–285. DOI 10.1002/pc.750110505.
Open DOI Search in Google Scholar Back to article
Polański, W. and Dobrzeński, P. “Wdrożenie oprogramowania PAM-FORM do modelowania formowania kompozytów termoplastycznych z użyciem prasy.” 30/KZPP/2018. Instytut Lotnictwa, Warszawa. 2018.
Search in Google Scholar Back to article
Waśniewski, B. “Duroplasty oraz termoplasty wysokotemperaturowe w prepregach jako osnowy kompozytów węglowych do wytwarzania struktur lotniczych.” Prace Instytutu Lotnictwa Vol. 2 nr 243 (2016): ss. 28–39.
Search in Google Scholar Back to article
Toray Cetex® TC1200, Product Data Sheet”. Available at: https://www.toraytac.com/product-explorer/products/ovl4/Toray-Cetex-TC1200
Search in Google Scholar Back to article
Dobrzański, P. “Process Specification for Fabric Panel Manufacturing”. IL.S2.WP2.R.1.1.2_F. Instytut Lotnictwa, Warszawa. 2017.
Search in Google Scholar Back to article
Michel, Biron. Thermoplastics and Thermoplastic Composites. 3rd edn. Elsevier, US (2018).
Search in Google Scholar Back to article
Harris, J.E., Winslow, P.A., Botkin, J.H., Maresca, L.M., Clendinning, R.A., Cotter, R.J., Matzner, M. and Kwiatkowski, G.T. “Poly(aryl ether ketone) (PAEK) Block and Chain-Extended Copolymers. 2. Preparation and Characterization of Chain-Extended PAEK Copolymers and Poly(ether ketone ketone)/Poly(ether ether ketone) Block Copolymers.” Macromolecules Vol. 26 No. 9 (1993): pp. 2366–2371. DOI 10.1021/ma00061a032.
Open DOI Search in Google Scholar Back to article
Toray Cetex® TC1225, “Product Data Sheet”. Available at: https://www.toraytac.com/product-explorer/products/gXuK/Toray-Cetex-TC1225.
Search in Google Scholar Back to article
Andrulonis, R., Lovingfoss, R., Tanoto, V. and John, Tomblin. NCAMP Material Specification-“Formerly TenCate) Cetex® TC1225 Low Melt (LM) Polyaryletherketone (PAEK)”, NMS 122 Rev C. Wichita State University – National Institute for Aviation Research, Witchita, USA (2020).
Search in Google Scholar Back to article
Polański, W. “Opracowanie technologii wytwarzania elementów drzwi inspekcyjnych i łączenia bezadhezyj-nego.” 12/CKTP/2019. Instytut Lotnictwa, Warszawa. 2019.
Search in Google Scholar Back to article
Gardiner, G. “PEEK vs. PEKK vs. PAEK and Continuous Compression Molding” (2018). Available at: https://www.compositesworld.com/articles/peek-vs-pekk-vs-paek-and-continuous-compression-molding
Search in Google Scholar Back to article
Dobrzański, P. “Elaboration of the Hot Press Technology for Two Selected Materials.” IL.S2.WP2.R.1.1.2. Instytut Lotnictwa, Warszawa. 2017.
Search in Google Scholar Back to article
Boisse, P., Hamila, N. and Madeo, A. “Modelling the Development of Defects during Composite Reinforcements and Prepreg Forming” (2016). DOI 10.1098/rsta.2015.0269#d3e1371.
Open DOI Search in Google Scholar Back to article
Wang, P., Hamila, N. and Boisse, P. “Intraply Shearing Characterization of Thermoplastic Composite Materials in Thermoforming Processes”. Key Engineering Materials Vol. 504–506 (2012): pp. 243–248.
Search in Google Scholar Back to article
Guzman-Maldonado, E., Hamila, N., Boisse, P. and Bikard, J. “Thermomechanical Analysis, Modelling and Simulation of the Forming of Pre-Impregnated Thermoplastics Composites”. Composites: Part A: Applied Science and Manufacturing Vol. 78 (2015): pp. 211–222.
Search in Google Scholar Back to article
Altstaedt, V., Werner, P. and Sandler, J. 2003. “Rheological, Mechanical and Tribological Properties of Carbon-Nanofibre Reinforced Poly (ether ether ketone) Composites.” Polímeros Vol. 13 No.4 (2003). DOI 10.1590/S0104-14282003000400005.
Open DOI Search in Google Scholar Back to article
Boisse, P., Hamila, N., Guzman-Maldonado, E., Madeo, A., Hivet, G. and dell’Isola, F. 2017 “The Bias-Extension Test for the Analysis of In-Plane Shear Properties of Textile Composite Reinforcements and Prepregs: A Review”. International Journal of Material Forming Vol. 10 (2017): pp. 473–492.
Search in Google Scholar Back to article
Pierce, R.S., Falzon, B.G., Thompson, M.C. and Boman, R. “A Low-Cost Digital Image Correlation Technique for Characterising the Shear Deformation of Fabrics for Draping Studies”. Strain Vol. 51 (2015): pp. 180–189.
Search in Google Scholar Back to article
Wang, P., Hamila, N., Boisse, P., Chaudet, P. and Lesueur, D. “Thermo-Mechanical Behavior of Stretch-Broken Carbon Fiber and Thermoplastic Resin Composites during Manufacturing.” Polymer Composites Vol. 36 (2015): pp. 694–703.
Search in Google Scholar Back to article
Liang, B., Hamila, N., Peillon, M. and Boisse, P. “Analysis of Thermoplastic Prepreg Bending Stiffness during Manufacturing and of its Influence on Wrinkling Simulations”. Composites: Part A: Applied Science and Manufacturing Vol. 67 (2014): pp. 111–122.
Search in Google Scholar Back to article
Sachs, U. Friction and Bending in Thermoplastic Composites Forming Processes. University of Twente, Enschede, The Netherlands (2014).
Search in Google Scholar Back to article