References
- [1] Whipple F.L., 1947, “Meteorites and space travel,” Astronomical Journal, 52, 132-137.
- [2] Kang P., Youn S.K. and Lim J.H., 2013“Modification of the critical projectile diameter of honeycomb sandwich panel considering the channeling effect in hypervelocity impact,” Aerospace Science and Technology, 29, 413-425.
- [3] Zhang X.T., Wang R.Q., Liu J.X., Li X.G. and Jia G.H., 2018, “A numerical method for the ballistic performance prediction of the sandwiched open cell aluminum foam under hypervelocity impact,” Aerospace Science and Technology, 75, 254-260.
- [4] Cour-Palais B.J., 1969, “Meteoroid protection by multiwall structures,” AIAA Hypervelocity Impact Conference, Cincinnati, OH, USA.
- [5] Christiansen E.L. and Justin H.K., 2001, “Ballistic limit equations for spacecraft shielding,” International Journal of Impact Engineering, 26, 93-104.
- [6] Ryan S., Bjorkman M. and Christiansen E.L., 2011, “Whipple shield performance in the shatter regime,” International Journal of Impact Engineering, 38, 504-510.
- [7] Schafer F.K., 2006, “An engineering fragmentation model for the impact of spherical projectiles on thin metallic plates,” International Journal of Impact Engineering, 33, 745-762.
- [8] Cohen L.J., 1995, “A debris cloud cratering model,” International Journal of Impact Engineering, 17, 229–240.
- [9] Ding L., Li C., Pang B. and Zhang B., 2008, “Ballistic limit equations in ballistic and shatter regions,” International Journal of Impact Engineering, 35, 1490-1496.
- [10] Francesconi A., Giacomuzzo C., Feltrin F., Antonello A. and Savioli L., 2015, “An engineering model to describe fragments clouds propagating inside spacecraft in consequence of space debris impact on sandwich panel structures,” Acta Astronautica, 116, 222-228.
- [11] Piekutowski A.J., 1996, Formation and Description of Debris Clouds Produced by Hypervelocity Impact, NAS8-38856.
- [12] Chi R., 2010, Research and modeling of debris cloud produced by hypervelocity impact of projectile with thin plate, PhD Thesis, Harbin Institute of Technology, 100–120. (in Chinese)
- [13] Wen K., Chen X.W., Chi R.Q. and Lu Y.G., 2020, “Analysis on the fragmentation of sphere hypervelocity impacting on thin plate,” International Journal of Impact Engineering, 146, 103721.
- [14] Wen K., Chen X.W., 2021, “Failure evolution in hypervelocity impact of Al spheres onto thin Al plates,” International Journal of Impact Engineering, 147, 103727.
- [15] Zhang X., Jia G. and Huang H., 2011, “Fragment identification and statistics method of hypervelocity impact SPH simulation,” Chinese Journal of Aeronautics, 24, 18-24.
- [16] Liang S.C., Li Y., Chen H., Huang J. and Liu S., 2013, “Research on the technique of identifying debris and obtaining characteristic parameters of large-scale 3D point set,” International Journal of Impact Engineering, 56, 27-31.
- [17] Sokolov V.G., Christiansen E.L., Gorbenko A.V., Feldstein V.A., Romanchenkov V.P., Panichkin N.G., Yachlakov Y.V. and Zinchenko L.V., 2001, “The effect of thin deployable construction elements of the international space station on the probability of its hull penetration by meteoroids and orbital debris, International Journal of Impact Engineering, 26, 725-734.
- [18] Hopkins A.K., Lee T.W. and Swift H.F., 1972, “Material phase transformation effects upon performance of spaced bumper systems,” Journal of Spacecraft and Rockets, 9(5), 342-345.
- [19] Hayashida K.B. and Robinson J.H., 1991, Single wall penetration equations, NASA TM-103565.
- [20] Christiansen E.L., 1993, “Design and performance equations for advanced meteoroid and debris shield,” International Journal of Impact Engineering, 14, 145-156.
- [21] Reimerdesa H.G., Nolke D. and Schafer F., 2006, “Modified Cour-Palais/Christiansen damage equations for double-wall structures,” International Journal of Impact Engineering, 33, 645-654.
- [22] Swift H., Preonas D., Dueweke P. and Bertke R., 1970, Response of materials to impulsive loading. AFML-TR-70e135. Dayton: Air Force Materials Laboratory, Wright Patterson Air Force Base.