Tests of Selected Mechanical Properties of Welded Joints in Rotorcraft

Izabela Korzec; Tomasz Łusiak; Martin Bugaj

doi:10.2478/tar-2021-0005

.blurhash-client-img { display: none !important; }

Tests of Selected Mechanical Properties of Welded Joints in Rotorcraft

Transactions on Aerospace Research

Volume 2021 (2021): Issue 1 (March 2021)

By: Izabela Korzec , Tomasz Łusiak and Martin Bugaj

Open Access

|Mar 2021

Abstract

The following article presents experimental use of different ways of inguinal connecting of aircraft elements using TIG (Tungsten Inert Gas), MAG (Metal Active Gas) and arched coated electrode. The object of the research were samples of rotorcraft elements, which were connected to each other by TIG, MAG methods and the coated electrode. The main aim of the research was to determine selected mechanical properties in particular hardness and strength of inguinal joints and then, based on the tests carried out, the best methods were selected.

References

[1] Lusiak, T., Novak, A., Bugaj, M., Madlenak, R., 2020, “Assessment of impact of aerodynamic loads on the stability and control of the gyrocopter model”. Communications – Scientific Letters of the University of Zilina, 22(4), pp. 63-69. 10.26552/com.C.2020.4.63-6.10.26552/com.C.2020.4.63-69
Search in Google Scholar Back to article
[2] Catlos, M., Kurdel, P., Sedlakova, A. N., Labun, J., Ceskovic, M., 2018, “Continual monitoring of precision of aerial transport objects”. Paper presented at the NTAD 2018 - 13th International Scientific Conference – New Trends in Aviation Development, Proceedings, pp. 76-81. 10.1109/NTAD.2018.8551683.10.1109/NTAD.2018.8551683
Search in Google Scholar Back to article
[3] Kurdel, P., Sedláčková, A. N.; Labun, J., 2019, “UAV flight safety close to the mountain massif”. Paper presented at the Transportation Research Procedia, 43, pp. 319-327. 10.1016/j.trpro.2019.12.0410.1016/j.trpro.2019.12.047
Search in Google Scholar Back to article
[4] Sedláčková, A. N., Kurdel, P.; Labun, J., 2020, “Simulation of unmanned aircraft vehicle flight precision”. Paper presented at the Transportation Research Procedia, 44, pp. 313-320. 10.1016/j.trpro.2020.02.03.10.1016/j.trpro.2020.02.037
Search in Google Scholar Back to article
[5] Čerňan, J., Rodziňák, D., Semrád, K.,Truchlý, M., 2015, “The tribological properties of the coated sintered material”. Acta Metallurgica Slovaca, 21(1), pp. 44-52. 10.12776/ams.v21i1.467.10.12776/ams.v21i1.467
Search in Google Scholar Back to article
[6] Fördös, P., Čerňan, J. 2020. “Analysis of the impact of hard pvd coatings on the abrasion resistance of the compressor blades”. Advances in Military Technology, 15(1), pp. 85-95. 10.3849/aimt.01333.10.3849/aimt.01333
Search in Google Scholar Back to article
[7] Fozo, L., Čerňan, J., Cúttová, M., Ratkovská, K., Adamčík, F., 2017, “Effect of TBC on heat transfer into nickel based refractory alloy”. Paper presented at the SAMI 2017 – IEEE 15th International Symposium on Applied Machine Intelligence and Informatics, Proceedings, pp. 435-438. 10.1109/SAMI.2017.7880348.10.1109/SAMI.2017.7880348
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/tar-2021-0005 | Journal eISSN: 2545-2835

Journal RSS Feed

Language: English

Page range: 64 - 74

Published on: Mar 26, 2021

Published by: ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

Welding,

aerospace components,

TIG,

MAG,

coated electrode

Related subjects:

Engineering,

Introductions and overviews,

Materials sciences, other,

Physics,

Physics, other

© 2021 Izabela Korzec, Tomasz Łusiak, Martin Bugaj, published by ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 2021 (2021): Issue 1 (March 2021)