References
- [1] Hagemaier, D.J., 1991, “Nondestructive testing developments in the aircraft industry”, Materials Evaluation, 49(12), pp. 1470-1478.
- [2] Schmidt, H-J., Schmidt-Brandecker, B., Tober. G., 2000, “Design of modern aircraft structure and the role of NDI”, Insight, 42(3), pp. 141-147.
- [3] Ball, D. L., 2003, “The Role of Nondestructive Testing in Aircraft Damage Tolerance”, Materials Evaluation, 61(7), pp. 814-818.
- [4] Libby, H. L., 1971, Introduction to Electromagnetic Non-destructive Test Methods, New-york, etc: Wiley-Interscience.
- [5] Udpa, S.S., More P.O., Eds, 2004, Nondestructive testing handbook (third edition), 5, Electromagnetic testing, American Society for NDT.
- [6] Uchanin, V., 2020, “Detection of the fatigue cracks initiated near the rivet holes by eddy current inspection techniques”, Transactions on Aerospace Research, 1(258), pp. 47-58.
- [7] Ostash, O., Fedirko, V., Uchanin, V. Bychkov, S., Moliar O., Semenets, O., Kravets V., Derecha V., 2007, Fracture mechanics and strength of materials, Vol. 5. Strength and durability of airplane materials and structural elements (in Ukrainian), Lviv, Spolom.
- [8] Ostash, O., Uchanin, V., Semenets, O., Holovatyuk, y., Kovalchuk, L., Derecha, V., 2018, “Evaluation of aluminium alloys degradation in aging aircraft”, Research in Nondestructive Evaluation, 29(3), pp. 156-166.
- [9] Hagemaier, D.J., 1991, “Application of crack detection to aircraft structures, Fatigue crack measurement: techniques and applications (Eds K.J. Marsh, R.A. Smith and R.O. Ritchie), Warley: EMAS, pp. 419-455.
- [10] Uchanin, V., Derecha, V., 2006, “Eddy current method for detection of surface defects in aircraft units in in-service conditions” (in Russian), Technical Diagnostic and Nondestructive Testing (Kyiv), 4, pp. 20-28.
- [11] Uchanin, V., 2010, “Surface type eddy current probes: extended classification, comparative analysis and typical examples of realization” (in Russian), Technical Diagnostic and Nondestructive Testing (Kyiv), 4, pp. 24-29.
- [12] Uchanin, V., 2018, “Prepositions on improvement of the classification of eddy current transducers (in Ukrainian), Technical Diagnostic and Nondestructive Testing (Kyiv), 2, pp. 69-74.
- [13] Uchanin, V., Aleksandrov, S., Tsiganov, V., 2009, “Eddy current flaw detection of aircraft engines in in-service and repair conditions” (in Russian), Bulletin of Engine-building, 2, pp. 151-155.
- [14] Grubinskas, R.C., 1966, “An Evaluation of Probe Coils with Ferrite Cores for Use in Electromagnetic Testing”, Materials evaluation, 10, 557-563.
- [15] Capobianco, T.E., 1987, “Field mapping and performance characterization of commercial eddy current probes”, Review of Progress in quantitative Nondestructive Evaluation, 6A, New york: Plenum Press, pp. 687-694.
- [16] Capobianco, T.E., Splett, J.D., Iyer, H.K., 1990, “Eddy Current Probe Sensitivity as a Function of Coil Construction Parameters”. Research in Nondestructive Evaluation, 2, pp. 169-186.
- [17] Uchanin, V., 2012, “Method of eddy current probe efficiency determination” (in Ukrainian), Ukrainian patent 42132.
- [18] Uchanin, V., 2012, “Invariant efficiency parameter of eddy-current probes for nondestructive testing”, Materials Science, 48(3), pp. 408-413.
- [19] Uchanin, V., 2014, “Invariant parameter for eddy current coil efficiency estimation, 11th Europ. Conf. on NDT, Prague (www.ndt.net).
- [20] Buvat, F., Pichenot, G., and Premel, D. 2005, “Eddy Current Modelling of Ferrite-cored Probes”, Review of Progress in quantitative Nondestructive Evaluation, 24, pp. 463-470.
- [21] Uchanin, V., 2007, “Specific features of the space distribution of the signal of an eddy-current converter caused by cracks of different lengths”, Materials Science, 43(4), pp. 591-595.
- [22] Auld, B.A., McFetridge, G., Riaziat, M. and Jefferies, S., 1985, “Improved probe-flaw interaction modeling, inversion processing, and surface roughness clutter”, Review of Progress in quantitative Nondestructive Evaluation, 4A, pp. 623-634.
- [23] Moulder, J.C., and Gerlitz, J.C., 1986, “Semi-elliptical surface flaw EC interaction and inversion: experiment”, Review of Progress in quantitative Nondestructive Evaluation, 5A, pp. 395-402.
- [24] Uchanin, V., Lutsenko, G., Opanasenko, A., Dzhaganian, A. 2016, “PROMPRyLAD Family of Eddy Current Flaw Detectors – From Simple to more Complicated”, 19th World Conf. on Nondestructive Testing, Munich (www.ndt.net).
- [25] Uchanin, V., Derecha, V., Semenets, O., 2018, “Eddy current method for detection of the defects in the rivet area of aircraft structures” (in Ukrainian), Ukrainian patent 125679.
- [26] Uchanin, V., 2010, “Self-generator type eddy current flaw detectors: main principles, classification, comparative analysis” (in Russian), Technical Diagnostic and Nondestructive Testing (Kyiv), 2, pp. 18-23.
- [27] Uchanin, V., Cherlenevskiy, V., 2008, “Eddy current flaw detector” (in Ukrainian), Ukrainian patent 39207.
- [28] Uchanin, V., Cherlenevskiy, V., 2009, “Eddy current self-generator type flaw detector” (in Ukrainian), Ukrainian patent 39217.
- [29] Uchanin, V., Cherlenevskiy, V., 2009, “Instrumentation for eddy current testing” (in Ukrainian), Ukrainian patent 42132.