References
- [1] Waśniewski, B., 2016, “High tempertaure thermoplasts in prepregs as a matrix of carbon fibre composites used in aerostructures”, Transactions of the Institute of Aviation, 2(243), pp. 28-39, (in Polish).
- [2] https://aluminiuminsider.com/aluminium-lithium-alloys-fight-back/ [access June 2018]
- [3] Mondo, J., Wijskamp, S. and Lenferink, R., 2012, Overview of Thermoplastic Composite ATL and AFP Technologies, ITHEC 2012, Messe Bremen.
- [4] Wiśniowski, W., 2011, “Institute of Aviation – Uncommon path to success”, Transactions of the Institute of Aviation, 214, pp. 24-27, (in Polish).
- [5] Wiśniowski, W., 2014, “Specializations of the Institute of Aviation – Review and Applications”, Transactions of the Institute of Aviation, 2(235), pp. 7-16, (in Polish).
- [6] Wiśniewski, A., Sałacińska, A., Szymański, R. and Kunikowska, A., 2016, “Manufacturing of composites samples with graphene”, Transactions of the Institute of Aviation, 4(245), pp. 262-270.
- [7] Cartz, L., 1995, Nondestructive Testing, 3rd edition, ASM International, Milwaukee WI USA, Chap. 3.
- [8] Hellier, Ch. J., 2003, Handbook of Nondestructive Evaluation, McGraw-Hill, Chap. 1.1.
- [9] The American Society for Nondestructive Testing, 2020, Introduction to Nondestructive Testing, https://www.asnt.org/MajorSiteSections/About/Introduction_to_Nondestructive_Testing.aspx
- [10] https://www.firstflight.com/private-pilot-course/preflighting-the-aircraft/ [access June 2018]
- [11] https://www.olympus-ims.com/en/applications/non-destructive-bond-testing-aircraft-composites/ [access May 2018]
- [12] Meola, C. and Carlomagno, G. M., 2014, “Infrared thermography to evaluate impact damage in glass/epoxy with manufacturing defects”, International Journal of Impact Engineering, 67(0), pp. 1-11.
- [13] Zhao, Y., Mehnen, J., Sirikham, A. and Rajkumar, R., 2017, “A novel defect depth measurement method based on Nonlinear System Identification for pulsed thermographic Inspection”, Mechanical Systems and Signal Processing, 85, pp. 382-395.
- [14] Krysztofik, J. and Manaj, W., 2011, “The use of non-destructive examinations in aviation technology”, Transactions of the Institute of Aviation, 211, pp. 120-129, (in Polish).
- [15] http://www.jrtech.co.uk/products/ndt-and-inspection/115-launch-of-new-woodpecker-wp-632am [access May 2018]
- [16] https://www.dantecdynamics.com/shearography-non-destructive-testing [access May 2018]
- [17] Campbell, F. C., 2004, Manufacturing processes for advanced composites, Elsevier Ltd., United Kingdom.
- [18] Erber, A. and Spitka, S., 2014, “Expaded role for thermoplastic composites”, Reinforced Plastics, 58(4), pp. 29-33.
- [19] Stewart, R., 2011, “Termoplastic composites – recyclable and fast process”, Reinforced Plastics, 55(3), pp. 22-28.
- [20] Pora, J., 2001, Composite Materials in the Airbus A380 – From History to Future, 13th International Conference on Composite Materials, Beijing.
- [21] Unnthorsonn R., Jonsson M. P. and Runarsson, T. P., 2004, NDT Methods for Evaluating Carbon Fibre Composites, Comptest, University of Bristol, from: https://www.bristol.ac.uk/composites/media/comptest2004/proceedings/posters/comptest_106.pdf
- [22] Mackiewicz, S. and Góra, G., 2005, „Ultrasonic testing of composite structures in the aviation industry”, XI Seminarium Nieniszczące Badania Materiałów, Zakopane, Poland, pp. 119-134, from: http://www.ndtsoft.pl/artykuly/Zakopane2005.pdf [access May 2018], (in Polish).
- [23] https://www.olympus-ims.com/pl/ndt-tutorials/phased-array/ [access May 2018]