References
- [1] Higgins A., 2000, “Adhesive bonding of aircraft structures”, Int. Journal of Adhesion & Adhesives, No. 20, pp. 367-376.
- [2] Öchsner A., Genger J., 2004, “Critical analysis of the substrate deformation correction in the thick adherend tensile-shear test”, Int. Journ. Of Adhesion & Adhesives, No. 24, pp. 37-41.
- [3] ASTM D5656, “Standard test method for thick adherend metal lap-shear joints for determination of the stress-strain behavior of adhesives in shear by tension loading”.
- [4] Seneviratne W.P., Tomblin J.S., 2011, “Adhesive characterization using NIAR-modified KGR estensometer”, SAMPE Journal, No. 47, pp. 37-44.
- [5] Yang Ch., Tomblin J.S., 2001, “Investigation of adhesive behavior in aircraft applications”, DOT/FAA/AR-01/57 report.
- [6] Da Silva L.F.M., Öchsner A., 2011, “Failure strength tests”, Handbook of Adhesion Technology, pp. 443-471.
- [7] Kassapoglou Ch., Adelmann J.C., 1992, “KGR-1 thick adherend specimen evaluation for the determination of adhesive mechanical properties”, SAMPE Quarterly, pp. 19-27.
- [8] Da Silva L.F.M. et al., 2008, “Alternative methods to measure the adhesive shear displacement in the thick adherend shear test”, Journ. Of Adhesion Science and Technology, No. 22, pp. 15-29.
- [9] ASTM D1002, 2010, “Standard test method for apparent shear strength of single-lap joint adhesively bonded metal specimens by tension loading (metal-to-metal)” ASTM International, West Conshohocken, PA, DOI: 10.1520/D1002-10.
- [10] Wiśniowski W., 2014, „XX lat Programu Samolotów Lekkich i Bezpieczeństwa. PSLiB” („Twenty Years of Light Aircraft and Safety Program”), Transactions of the Institute of Aviation, Vol. 236(2), pp. 7-25.
- [11] Kaczorowska E., 2016, „Porównanie metod testowania wytrzymałości kleju na odrywanie dla różnych sposobów przygotowania powierzchni próbek” („Comparison of Methods for Testing the Peel Strenght for Different Methods of Preparation of Surface Samples”), Transactions of the Institute of Aviation, Vol. 244(3), pp. 92-98
- [12] Jaśkiewicz R., Stepniowska A., 2016, „Praktyczne zastosowanie metodyki FAA do przyklejania próbek kompozytowych, do testów kwalifikacji materiału” (Practical Application of FAA Methodology of Composite Specimens Used to Material Tests Qualifications”), Transactions of the Institute of Aviation, Vol. 244(3), pp. 74-78.