References
- [1] Guła P., Iwaniuk A., 2016, “Report on validation of complex design methodology for BE1 engine integration with ACC TR1”, ESPOSA Consortium Report.
- [2] DECISION NO. 2003/14/RM OF THE EXECUTIVE DIRECTOR OF THE AGENCY (EASA) of 14 November 2003 on certification specifications, including airworthiness codes and acceptable means of compliance for normal, utility, aerobatic and commuter category aeroplanes (CS-23).
- [3] Dudziak J., Guła P., Gawlik A., Kondracki J., 2017, “Design and manufacture of nacelles for small turboprop aircraft”, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Volume 231, Issue 12, pp 2239-2247
- [4] Goetzendorf-Grabowski T., 2014, “Formulation of the optimization problem for engine mount design – tractor propeller case”, Aircraft Engineering and Aerospace Technology: An International Journal, Vol. 86 Issue: 3, pp. 228-233
- [5] Idzikowski, M., Miksa, W., 2018, “Ground and In-Flight Testing of Cooling Efficiency of Turboprop Engine Compartment”, TRANSACTIONS OF THE INSTITUTE OF AVIATION, No. 1(250), Warsaw, pp.16-24.
- [6] Stalewski W., Żółtak J., 2014, „The preliminary design of the air-intake system and the nacelle in the small aircraft-engine integration process”, Aircraft Engineering and Aerospace Technology: An International Journal, Vol. 86 Issue: 3, pp.250-258, doi: 10.1108/AEAT-01-2013-0015.
- [7] Advisory Circular AC 25.939-1 – Evaluating Turbine Engine Operating Characteristics, 1986, Federal Aviation Administration.
- [8] MT-propeller (E-124) „Operation and Installation Manual”, Hydraulically Controlled Variable Pitch Propeller, MTV-25-(), Issue 59, January 16, 2017.
- [9] Balicki W., Chachurski R., Głowacki P., Godzimirski J., Kawalec K., Kozakiewicz A., Pągowski Z., Rowiński A., Szczeciński J. i Szczeciński S., 2012, „Lotnicze Silniki Turbinowe, Konstrukcja – Eksploatacja – Diagnostyka, część II”, Biblioteka Naukowa Instytutu Lotnictwa nr 34, Warszawa.
- [10] Jeżowiecka-Kabsch K. i Szewczyk H., 2001, „Mechanika Płynów”, Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław.
- [11] Piwek, K., Wiśniowski, W., 2016, “Small air transport aircraft entry requirements evoked by FlightPath 2050”, Aircraft Engineering and Aerospace Technology, Vol. 88, Issue 2, pp.: 341-347.
- [12] Iwaniuk, A., Wiśniowski, W. and Żółtak, J., 2016, “Multi-Disciplinary Optimisation Approach for a Light Turboprop Aircraft-Engine Integration and Improvement”, Aircraft Engineering and Aerospace Technology, Vol. 88 Issue 2, pp.: 348-355.