Implementation of Automatic Sample and Composite Element Cutting Technologies
References
- [1] Hashish M., 2013, Trimming of CFRP components, WJTA-IMCA Conference and Expo, September 9-11, 2013, Houston, Texas.
- [2] Patel R., Bovatsek J., Fujita M., 2017, High-power UV laser has use in CFRP machining,, http://www.industrial-lasers.com/
- [3] Ohlsson L., 1995, The theory and practice of abrasive water jet cutting, Doctoral thesis 1995:161D, Lulea University of Technology.
- [4] Kimlia advertising materials, www.kimla.pl, 2017.
- [5] Rimpault X., Chateleain J.-F., Klemberg-Sapieha J.E., Balazinski M., 2016, Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals, CIRP Journal of Manufacturing and Technology.
- [6] Arisawa H., Akama S., Niitani H., 2012, High-performance cutting and grinding for CFRP, Mitsubishi heavy industries Technical review, Vol. 49, No. 3, pp. 3-9.
- [7] Sloan J., 2017, Machining carbon composites – risky business, http://www.compositesworld.com/
- [8] Castells R., 2017, Five tips for machining carbon fiber, http://www.element.com/
- [9] Guangjun L., Hongyuan C., Zhen H., Fei G., Tao C., 2017, Surface quality of staggered PCD end mill in milling of carbon fiber reinforced plastics, Applied Sciences, Vol. 7.
- [10] Infotec sp. z o.o. advertising materials, 2017.
- [11] Szymański R., 2017, Quality control process of manufactured composite structures, Transactions of the Institute of Aviation, No. 1(246).
- [12] Kozaczuk K., Zalewska M., 2016, Composite testing laboratory performance development based on Lean Sigma approach – case study, Transactions of the Institute of Aviation, No. 4(245).
- [13] Jaśkiewicz R., 2016, Influence of the drilling process parameters on the quality and mechanical properties of drilling holes in carbon composites, Transactions of the Institute of Aviation, No. 3(244).
- [14] Jaśkiewicz R., Stepniowska A., 2016, Methodology of outliers determination for composite materials strength tests, Transactions of the Institute of Aviation, No. 3(244).
- [15] Karny M., 2016, The influence of hygrothermal conditioning on bearing strength of carbon-fiber/epoxy laminate, Transactions of the Institute of Aviation, No. 3(244).
- [16] Wilk J., 2016, Development and implementation of a testing method for the characterization of interlaminar delamination propagation in laminates under fatigue mode I loading conditions, Transactions of the Institute of Aviation, No. 2(243).
- [17] Jaśkiewicz R., Stepniowska A., 2016, Pracitcal application of FAA methodology of composite specimens used to material tests qualifications, Transactions of the Institute of Aviation, No. 3(244).
- [18] Sałacińska A., 2016, Review of physical tests for composite materials characterization, Transactions of the Institute of Aviation, No. 3(244).
- [19] Karny M. Falczyński P., 2017, The influence of the fastener hole preparation method on the fastener pull-through process in a carbon composite, Transactions of the Institute of Aviation, No. 1(246).
DOI: https://doi.org/10.2478/tar-2018-0013 | Journal eISSN: 2545-2835
Language: English
Page range: 24 - 33
Published on: Sep 3, 2019
Published by: Sciendo
In partnership with: Paradigm Publishing Services
Publication frequency: 4 times per year
Related subjects:
© 2019 Robert Jaśkiewicz, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.