Experimental Verification of Numerical Calculations with the Use of Digital Image Correlation
References
- [1] Osmęda, A., 2012, „Strength and construction analysis of aerospace test structure - Internal report (Analiza wytrzymałościowo-konstrukcyjna demonstratora, Raport wewnętrzny),” 05/BU/2012/TEBUK, Institute of Aviation, Warsaw.
- [2] Osmęda, A., 2016, “Result comparison of numerical analysis and structural tests of aerospace test structure (Porównanie wyników analiz numerycznych i prób wytrzymałościowych demonstratora struktury lotniczej),” Transactions of the Institute of Aviation, Warsaw, No. 244(3). pp. 123-134.
- [3] Bajurko, P., 2015, “Modeling subcomponent of demonstrator of tebuk project - Internal report (Modelowanie subkomponentu demonstratora TEBUK, Raport wewnętrzny),” 68/LK/2015/TEBUK, Institute of Aviation, Warsaw.
- [4] Chu, T. C., Ranson, W. F., and Sutton, M. A., 1985, “Applications of digital-image-correlation techniques to experimental mechanics,” ResearchGate, No. 25(3), pp. 232–244.
- [5] Lagattu, F., Brillaud, J., and Lafarie-Frenot, M.-C., 2004, “High strain gradient measurements by using digital image correlation technique,” Materials Characterization, No. 53(1), pp. 17–28.
- [6] Tomblin, J., and Seneviratne, W., 2011, Determining the Fatigue Life of Composite Aircraft Structures Using Life and Load-Enhancement Factors, Air Traffic Organization NextGen & Operations Planning Office of Research and Technology Development Washington, DC 20591.
- [7] Gower, M. R. L., and Shaw, R. M., 2010, “Towards a Planar Cruciform Specimen for Biaxial Characterisation of Polymer Matrix Composites,” Applied Mechanics and Materials, No. 24-25, pp. 115-120.
- [8] Leone, F. A., Bakuckas, J. G., Shyprykevich, P., and Davies, C., 2008, Structural Testing and Analysis of Honeycomb Sandwich Composite Fuselage Panels, Air Traffic Organization Operations Planning Office of Aviation Research and Development Washington, DC 20591.
- [9] Szala, J., and Boroński, D., 2007, “Local strain analysis in the zones of geometrical discontinuities and material inhomogeneities (Analiza odkształceń lokalnych w obszarach nieciągłości geometrycznych i niejednorodności materiałowych),” Acta Mechanica et Automatica, Vol. 1, No. 1, pp. 103-124.
- [10] Kokot, G., 2013, „Determination of mechanical properties of bone tissues using digital image correlation, nanoindentation and numerical simulations (Wyznaczanie własności mechanicznych tkanek kostnych z zastosowaniem cyfrowej korelacji obrazu, nanoindentancji oraz symulacji numerycznych),” Silesian University of Technology.
- [11] Battams, G. P., Dulieu-Barton, J. M., and Boyd, S. W., 2010, “Evaluation of Edge Cracks in Cross-Ply Laminates Using Image Correlation and Thermoelastic Stress Analysis,” Applied Mechanics and Materials, No. 24-25, pp. 91-96.
- [12] Gonzalez, J., and Knauss, W. G., 1998, “Strain inhomogeneity and discontinuous crack growth in a particulate composite,” Journal of the Mechanics and Physics of Solids, No. 46(10), pp. 1981–1995.
- [13] Moćko, W., 2015, “The use of digital correlation of the image to evaluate the impact of initial fatigue loads on the strain distribution and changes in the strength properties of dp500 steel (Zastosowanie cyfrowej korelacji obrazu do oceny wpływu wstępnych obciążeń zmęczeniowych na rozkład odkształcenia i zmiany właściwości wytrzymałościowych stali DP500),” Motor Transport, Z. 2, Motor Transport Institute, Warsaw, pp. 89-108.
- [14] Wilk, J., 2015, “Assessing the hazard of delamination propagation in composites using numerical analysis,” Composites Theory and Practice, R. 15, No. 1, pp. 34-38.
- [15] Bajurko, P., Wilk, J., Szeląg, D., and Czarnocki, P., 2014, “Numerical modeling of delamination growth in composite plates,” Shell Structures, Theory and Applications, CRS Press, Gdańsk, pp. 373-376.
- [16] Krueger, R., 2004, “Virtual crack closure technique: History, approach, and applications,” Appl. Mech. Rev, No. 57(2), pp. 109-143.
- [17] Bajurko, P., and Czarnocki, P., 2014, “Numerical and experimental investigations of embedded delamination growth caused by compressive loading,” Journal of Theoretical and Applied Mechanics, No. 52(2), pp. 301-312.
DOI: https://doi.org/10.2478/tar-2018-0011 | Journal eISSN: 2545-2835
Language: English
Page range: 1 - 15
Published on: Sep 3, 2019
Published by: Sciendo
In partnership with: Paradigm Publishing Services
Publication frequency: 4 times per year
Related subjects:
© 2019 Piotr Bajurko, Przemysław Dobrzański, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.