References
- Sanjayan, J.G., Nazari, A., & Nematollahi, B. (2019). 3D concrete printing technology: Construction and building applications. Print.
- Perrot, A. (2019). 3D printing of concrete. UK: Print.
- Karslioglu, A., Alkayis, M.H., & Onur, M. (2022). 3D printing technology in construction sector: A short review. In International Conference on Applied Engineering and Natural Sciences, Turkey.
- Tay, Y.W.D., Panda, B., Paul, S.C., Mohamed, N.A.N., Tan, M.J., & Leong, K.F. (2017). 3D printing trends in building and construction industry: A review. Virtual and Physical Prototyping, 12(3), 261-276. https://doi.org/10.1080/17452759.2017.1326724.
- Khoshnevis, B. (2004). Automated construction by contour crafting—Related robotics and information technologies. Automation in Construction, 13(1), 5-19. https://doi.org/10.1016/j.autcon.2003.08.012.
- Hossain, M.A., Zhumabekova, A., Paul, S.C., & Kim, J.R. (2020). A review of 3D printing in construction and its impact on the labor market. Sustainability, 12(20), 8492. https://doi.org/10.3390/su12208492.
- Bazli, M., Ashrafi, H., Rajabipour, A., & Kutay, C. (2023). 3D printing for remote housing: Benefits and challenges. Automation in Construction, 148, Article 104772. http://dx.doi.org/10.1016/j.autcon.2023.104772.
- Filip, G.A., Abanda, F.H., & Fru, F.A. (2023). Construction 3D-printing in reducing the incidence of long latency respiratory diseases among construction workers in the UK. Safety in Extreme Environments, 5, 177-197. https://doi.org/10.1007/s42797-023-00078-4.
- El-Sayegh, S., Romdhane, L., & Manjikian, S. (2020). A critical review of 3D printing in construction: Benefits, challenges, and risks. Archives of Civil and Mechanical Engineering, 20, Article 34. https://doi.org/10.1007/s43452-020-00038-w.
- Suvash Chandra Paul, van Zijl, G.P.A.G., Tan, M.J., & Gibson, I. (2018). A review of 3D concrete printing systems and materials properties: Current status and future research prospects. Rapid Prototyping Journal. https://doi.org/10.1108/RPJ-09-2016-0154.
- Hameed, R., & Papon, A. (2019). Étude numérique du comportement d’un élément en béton imprimé en 3D. In DiXite3dPrint: Fabrication additive pour la construction. Quelle actualité nationale? École des Ponts ParisTech, January 17-18, 2019, Champs-sur-Marne, France. HAL Id: hal-02119257. Retrieved from https://enpc.hal.science/hal-02119257.
- Feng, P., Meng, X., Chen, J.-F., & Ye, L. (2015). Mechanical properties of structures 3D printed with cementitious powders. Construction and Building Materials, 93, 486–497. https://doi.org/10.1016/j.conbuildmat.2015.05.132.
- Shakor, P., Gowripalan, N., & Rasouli, H. (2021). Experimental and numerical analysis of 3D printed cement mortar specimens using inkjet 3DP. Archives of Civil and Mechanical Engineering, 21, Article 58. https://doi.org/10.1007/s43452-021-00209-3.
- Aghajani Delavar, M., Chen, H., & Sideris, P. (2022). Design of 3D printed concrete walls under in-plane seismic loading. In Proceedings of the 12th National Conference on Earthquake Engineering, Earthquake Engineering Research Institute, Salt Lake City, UT.
- Li, F., Hu, X., & Shahzad, Q. (2025). Anisotropic behavior in 3D printed concrete: Finite element simulation approach. Journal of Advanced Construction Materials, 12(3), 45-60.
- Xiao, J., Liu, H., & Ding, T. (2021). Finite element analysis on the anisotropic behavior of 3D printed concrete under compression and flexure. Additive Manufacturing, 39, 101712. https://doi.org/10.1016/j.addma.2020.101712.
- Kaliyavaradhan, S. K., Ambily, P. S., Prem, P. R., & Ghodke, S. B. (2022). Test methods for 3D printable concrete. Preprint submitted to Elsevier, August 10, 2022.
- Özalp, F., & Yilmaz, H. D. (2020). Fresh and hardened properties of 3D high-strength printing concrete and its recent applications. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 44(Suppl 1), 319–330. https://doi.org/10.1007/s40996-020-00370-4.
- Benamara, A. (2022). Impression 3D de matériaux dédiés à la construction: De la définition des encres, maîtrise de l’impression à la performance des produits imprimés (Doctoral dissertation, Civil Engineering, CY Cergy Paris Université).
- Baz, B., Aouad, G., Khalil, N., & Remond, S. (2020). Inter-layer reinforcement of 3D printed concrete elements. Asian Journal of Civil Engineering, 22(3), 341–349. https://doi.org/10.1007/s42107-020-00317-0.
- Panda, B., Mohamed, N. A. N., Paul, S. C., Singh, G. B., Tan, M. J., & Šavija, B. (2019). The effect of material fresh properties and process parameters on buildability and interlayer adhesion of 3D printed concrete. Materials, 12(13), 2149. https://doi.org/10.3390/ma12132149.
- Meurer, M., & Classen, M. (2021). Mechanical properties of hardened 3D printed concretes and mortars Development of a consistent experimental characterization strategy. Materials, 14(4), 752. https://doi.org/10.3390/ma14040752.
- Panda, B., Paul, S. C., & Tan, M. J. (2017). Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material. Materials Letters, 209, 146–149. https://doi.org/10.1016/j.matlet.2017.07.123.
- Sanjayan, J. G., Nematollahi, B., Xia, M., & Marchment, T. (2018). Effect of surface moisture on inter-layer strength of 3D printed concrete. Construction and Building Materials, 172, 468–475.
- Wern, C. T. H., & Ali, N. (2024). Fresh properties and compressive strength of 3D printing concrete containing GGBS with varies in water-cement ratio. Recent Trends in Civil Engineering and Built Environment, 5(1), 205–215. https://doi.org/10.30880/rtcebe.2024.05.01.021.