References
- Aziz, P L., & Abdulkadir, M. R. (2022). Mechanical Properties and Flexural Strength of Reinforced Concrete Beams Containing Waste Material as Partial Replacement for Coarse Aggregates. International Journal of Concrete Structures and Materials, 16(1).
- Daghistani, F., Baghbani, A., Naga, H. A., & Faradonbeh, R. S. (2023). Internal Friction Angle of Cohesionless Binary Mixture Sand–Granular Rubber Using Experimental Study and Machine Learning. Geosciences, 13, 7–197. https://doi.org/10.3390/geosciences13070197
- Meles, D., Bayat, A., & Chan, D. (2013). One-dimensional compression model for tire-derived aggregate using large-scale testing apparatus. International Journal of Geotechnical Engineering, 8(2), 197–204. https://doi.org/10.1179/1939787913y.0000000019
- Rouhanifar, S., & Ibraim, E. (2015). Laboratory investigation on the mechanics of soft-rigid soil mixtures. 1073–1080. https://doi.org/10.3233/978-1-61499-601-9-1073
- Lamba, P., Kaur, D. P., Raj, S., & Sorout, J. (2021). Recycling/reuse of plastic waste as construction material for sustainable development: a review. Environmental Science and Pollution Research International, 29(57), 86156–86179. https://doi.org/10.1007/s11356-021-16980-y
- Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M., Baharom, S., & Azimi, M. (2016). Strength prediction of rotary brace damper using MLR and MARS. STRUCTURAL ENGINEERING AND MECHANICS, 60(3), 471–488. https://doi.org/10.12989/sem.2016.60.3.471
- Kou, S., Lee, G., Poon, C., & Lai, W. (2009). Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes. Waste Management, 29(2), 621–628. https://doi.org/10.1016/j.wasman.2008.06.014
- Senhadji, Y., Escadeillas, G., Benosman, A., Mouli, M., Khelafi, H., & Ould Kaci, S. (2015). Effect of incorporating PVC waste as aggregate on the physical, mechanical, and chloride ion penetration behavior of concrete. Journal of Adhesion Science and Technology, 29(7), 625–640. https://doi.org/10.1080/01694243.2014.1000773
- Haghighatnejad, N., Mousavi, S. Y., Khaleghi, S. J., Tabarsa, A., & Yousefi, S. (2016). Properties of recycled PVC aggregate concrete under different curing conditions. Construction and Building Materials, 126, 943–950. https://doi.org/10.1016/j.conbuildmat.2016.09.047
- Gesoglu, M., Güneyisi, E., Hansu, O., Etli, S., & Alhassan, M. (2017). Mechanical and fracture characteristics of self-compacting concretes containing different percentage of plastic waste powder. Construction and Building Materials, 140, 562–569. 140, 562–569. https://doi.org/10.1016/j.conbuildmat.2017.02.139
- Najjar, A.M. K., Basha, E. A., & Bashaand, Milad, M.B.K. (2013). Rigid polyvinyl chloride waste for partial replacement of natural coarse aggregate in concrete mixture. Int. J. Chem. Environ. Eng, 4 (6) 399–403.
- Aly, A. M., El-Feky, M., Kohail, M., & Nasr, E. S. A. (2019). Performance of geopolymer concrete containing recycled rubber. Construction and Building Materials, 207, 136–144. https://doi.org/10.1016/j.conbuildmat.2019.02.121
- Guo, S., Dai, Q., Si, R., Sun, X., & Lu, C. (2017). Evaluation of properties and performance of rubber-modified concrete for recycling of waste scrap tire. Journal of Cleaner Production, 148, 681–689. https://doi.org/10.1016/j.jclepro.2017.02.046
- Senhadji, Y., Escadeillas, G., Benosman, A., Mouli, M., Khelafi, H., & Ould Kaci, S. (2015). Effect of incorporating PVC waste as aggregate on the physical, mechanical, and chloride ion penetration behavior of concrete. Journal of Adhesion Science and Technology, 29(7), 625–640. https://doi.org/10.1080/01694243.2014.1000773
- Akçaözoğlu, S., Atiş, C. D., & Akçaözoğlu, K. (2010). An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete. Waste Management, 30(2), 285–290. https://doi.org/10.1016/j.wasman.2009.09.033
- Saikia, N., & de Brito, J. (2012). Use of plastic waste as aggregate in cement mortar and concrete preparation: A review. Construction and Building Materials, 34, 385–401. https://doi.org/10.1016/j.conbuildmat.2012.02.066
- Colangelo, F., Cioffi, R., Liguori, B., & Iucolano, F. (2016). Recycled polyolefins waste as aggregates for lightweight concrete. Composites. Part B, Engineering, 106, 234–241. https://doi.org/10.1016/j.compositesb.2016.09.041
- Coppola, B., Courard, L., Michel, F., Incarnato, L., Scarfato, P., & Di Maio, L. (2018). Hygro-thermal and durability properties of a lightweight mortar made with foamed plastic waste aggregates. Construction and Building Materials, 170, 200–206. https://doi.org/10.1016/j.conbuildmat.2018.03.083
- Albano, C., Camacho, N., Hernandez, M., Matheus, A., & Gutiérrez, A. (2009). Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios. Waste Management, 29(10), 2707–2716. https://doi.org/10.1016/.wasmaan.2009.05.007
- Kou, S., Lee, G., Poon, C., & Lai, W. (2009). Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes. Waste Management, 29(2), 621–628. https://doi.org/10.1016/j.wasman.2008.06.014
- Senthil Kumar, K., Gandhimathi, R., & Baskar, K. (2016). Assessment of Heavy Metals in Leachate of Concrete Made With E-Waste Plastic. Advances in Civil Engineering Materials, 5(1), 256–262. https://doi.org/10.1520/acem20160003
- Chidiac, S., & Mihaljevic, S. (2011). Performance of dry cast concrete blocks containing waste glass powder or polyethylene aggregates. Cement and Concrete Composites, 33(8), 855–863. https://doi.org/10.1016/j.cemconcomp.2011.05.004
- Kumar, R., & Dev, N. (2021). Mechanical and Microstructural Properties of Rubberized Concrete After Surface Modification of Waste Tire Rubber Crumb. Arabian Journal for Science and Engineering, 47(4), 4571–4587. https://doi.org/10.1007/s13369-021-06154-w
- Djebien, R., Bouabaz, A., & Abbas, Y. (2022). Effect of Recycled Tire Rubber and Marble Waste on Fresh and Hardened Properties of Concrete. Civil and Environmental Engineering Reports, 32(1), 218–239. https://doi.org/10.2478/ceer-2022-0013
- Si, R., Wang, J., Guo, S., Dai, Q., & Han, S. (2018). Evaluation of laboratory performance of self-consolidating concrete with recycled tire rubber. Journal of Cleaner Production, 180, 823–831. https://doi.org/10.1016/j.jclepro.2018.01.180
- Ramdani, S., Guettala, A., Benmalek, M., & Aguiar, J. B. (2019). Physical and mechanical performance of concrete made with waste rubber aggregate, glass powder and silica sand powder. Journal of Building Engineering, 21, 302–311. https://doi.org/10.1016/j.jobe.2018.11.003
- Khan Raja, Bilal Nasar., & Khitab, Anwar. (2020). Enhancing Physical, Mechanical and Thermal Properties of Rubberized Concrete. In: Engineering and Technology Quarterly Reviews, Vol.3, No.1, 33-45. https://www.asianinstituteofresearch.org/
- Uratsinze, A., & Garros, M. (2008). On the modulus of elasticity and strain capacity of Self-Compacting Concrete incorporating rubber aggregates. Resources, Conservation and Recycling, 52(10), 1209–1215. https://doi.org/10.1016/j.resconrec.2008.06.012
- Gupta, T., Chaudhary, S., & Sharma, R. K. (2014). Assessment of mechanical and durability properties of concrete containing waste rubber tire as fine aggregate. Construction and Building Materials, 73, 562–574. https://doi.org/10.1016/j.conbuildmat.2014.09.102
- Yilmaz, A., & Degirmenci, N. (2009). Possibility of using waste tire rubber and fly ash with Portland cement as construction materials. Waste Management, 29(5), 1541–1546. https://doi.org/10.1016/j.wasman.2008.11.002
- Ganjian, E., Khorami, M., & Maghsoudi, A. A. (2009). Scrap-tyre-rubber replacement for aggregate and filler in concrete. Construction and Building Materials, 23(5), 1828–1836. https://doi.org/10.1016/j.conbuildmat.2008.09.020
- Thomas, B. S., & Gupta, R. C. (2016). A comprehensive review on the applications of waste tire rubber in cement concrete. Renewable & Sustainable Energy Reviews, 54, 1323–1333. https://doi.org/10.1016/j.rser.2015.10.092
- Thomas, B. S., Gupta, R. C., Kalla, P., & Cseteneyi, L. (2014). Strength, abrasion and permeation characteristics of cement concrete containing discarded rubber fine aggregates. Construction and Building Materials, 59, 204–212. https://doi.org/10.1016/j.conbuildmat.2014.01.074
- Azimi-Pour, M., & Eskandari-Naddaf, H. (2020). Synergistic effect of colloidal nano and micro-silica on the microstructure and mechanical properties of mortar using full factorial design. Construction and Building Materials, 261, 120497. https://doi.org/10.1016/j.conbuildmat.2020.120497
- Mutuk, T., & Mesci, B. (2014). Analysis of mechanical properties of cement containing boron waste and rice husk ash using full factorial design. Journal of Cleaner Production, 69, 128–132. https://doi.org/10.1016/j.jclepro.2014.01.051
- Belmouhoub, A., Abdelouahed, A., & Noui, A. (2023). Experimental and factorial design of the mechanical and physical properties of concrete containing waste rubber powder. Research on Engineering Structures and Materials. https://doi.org/10.17515/resm2023.54me0810rs
- Najim, K. B., & Hall, M. R. (2012). Mechanical and dynamic properties of self-compacting crumb rubber modified concrete. Construction and Building Materials, 27(1), 521–530. https://doi.org/10.1016/j.conbuildmat.2011.07.013
- Belmokaddem, M., Mahi, A., Senhadji, Y., & Pekmezci, B. Y. (2020). Mechanical and physical properties and morphology of concrete containing plastic waste as aggregate. Construction and Building Materials, 257, 119559. https://doi.org/10.1016/j.conbuildmat.2020.119559
- Hannawi, K., Kamali-Bernard, S., & Prince, W. (2010). Physical and mechanical properties of mortars containing PET and PC waste aggregates. Waste Management, 30(11), 2312–2320. https://doi.org/10.1016/j.wasman.2010.03.028
- Silva, R., de Brito, J., & Saikia, N. (2013). Influence of curing conditions on the durability-related performance of concrete made with selected plastic waste aggregates. Cement and Concrete Composites, 35(1), 23–31. https://doi.org/10.1016/j.cemconcomp.2012.08.017
- Gupta, T., Siddique, S., Sharma, R. K., & Chaudhary, S. (2021). Investigating mechanical properties and durability of concrete containing recycled rubber ash and fibers. Journal of Material Cycles and Waste Management, 23(3), 1048–1057. https://doi.org/10.1007/s10163-021-01192-w
- Nanes, B. A. (2015). Slide Set: Reproducible image analysis and batch processing with ImageJ. BioTechniques, 59(5), 269–278. https://doi.org/10.2144/0001