References
- Sanjay KS. (2017). Fundamentals of Fibre-Reinforced Soil Engineering, Developments in Geotechnical Engineering. Series editors Braja M Das. Henderson. USA.
- ASTM. D 6270. (2004). Standard Practice for Use of Scrap Tires in Civil Engineering Applications. ASTM: West Conshohocken. PA, USA.
- Adhikari B & Maiti SD. (2000). Reclamation and recycling of waste rubber. Progress in Polymer Science, Vol.25, PP. 909-948
- Ahmed,I. (1993). Laboratory study on properties of rubber-soils. Report No. FHWA/IN/JHRP-93/4. West Lafayette, IN: Purdue University.
- Reddy SB, Krishna AM, Krishna, & Reddy R. (2017). Sustainable Utilization of Scrap Tire Derived Geomaterials for Geotechnical Applications. Indian Geotechnical Journal 48(3), 1-16, DOI. 10.1007/s40098-017-0273
- Cecich V, Gonzales L, Hoisaeter A, Williams, J, & Reddy, K. (1996). Use of shredded tires as lightweight backfill material for retaining structures. Waste Management and Research. 14, 433-451.
- Hataf N & Rahimi MM. (2005). Experimental investigation of bearing capacity of sand reinforced with randomly distributed tire shreds. Construction and Building Materials. 20 (10), 910-916.
- Yoon S, Prezzi M, Siddiki NZ & Kim B. (2006). Construction of a test embankment using a sand– tire shred mixture as fill material. Waste Management 26, 1033–1044.
- Reddy SB, & Krishna AM. (2015). Recycled tire chips mixed with sand as lightweight backfill material in retaining wall applications: An experimental investigation. International Journal of Geosynthetics and Ground Engineering. https://doi.org/10.1007/s40891-015-0036-0.
- Consoli Smith J, Jones M Jr, Houghton L. (1999). Future of health insurance. N Engl J Med 965, 325–329
- Zaimoglu AS & Yetimoglu T. (2011). Strength Behavior of Fine Grained Soil Reinforced with Randomly Distributed Polypropylene Fibers. Geotechnical and Geological Engineering. 30(1), 197–203.
- Li C. (2005). Mechanical response of fiber-reinforced soil. PhD Dissertation, The University of Texas at Austin, U.S.A.
- Hejazi SM, Sheikhzadeh M, Abtahi SM & Zadhoush A. (2012). A simple review of soil reinforcement by using natural and synthetic fibers. Construction and Building Materials. 30, 100–116.
- Brinkgreve RBJ. (2003). Manuel de Référence de PLAXIS Version 8.6. [PLAXIS 8.6]. Delft University of Technology and PLAXIS BV. Pays-Bas.
- Saribas I & Ok B. (2019). Seismic performance of recycled aggregate–filled cantilever reinforced concrete retaining walls. Advances in Mechanical Engineering. 11(4) 1–11
- Luwalaga JG. (2016). Analysing the Behaviour of Soil Reinforced with Polyethylene Terephthalate (PET) Plastic Waste. A Research Thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering (M Eng.), Faculty of Engineering at Stellenbosch University.
- Djadouni H, Trouzine H, Correia AG & Miranda TFS. (2019). 2D numerical analysis of a cantilever retaining wall backfilled with sand–tire chips mixtures. European Journal of Environmental and Civil Engineering. DOI:10.1080/19648189.2019.1570870.
- Vendruscolo MA NC, Fonini A & Rosa FD. (2009). Fiber reinforcement effects on sand considering a wide cementation range. Geotextiles and Geomembranes. 27(3), 196–203.