References
- [1] Dvorak R., Kosior E., Hopewell P., Plastics recycling: challenges and opportunities, ‘Philosophical Transactions of The Royal Society’, August 2009, pp. 2115–2126.
- [2] Govignon Q., Bickerton S., Morris J., Kelly P.A., Full field monitoring of the resin flow and laminate properties during the resin infusion process, ‘Composites. Part A’, 2008, No. 39, pp. 1412–1426.
- [3] Hyla I., Śleziona J., Kompozyty. Elementy mechaniki i projektowania, Publ. Silesian University of Technology, Gliwice 2004 [Composites. Elements of mechanics and design — available in Polish].
- [4] Kowalska E., Wielgosz Z., Bartczak T., Utylizacja odpadów laminatów poliestrowo-szklanych, ‘Polimery’, 2002, Vol. 47, No. 2, pp. 110–116 [Waste disposal of polyester-glass laminates — available in Polish].10.14314/polimery.2002.110
- [5] Lunn P., Tooling materiale ideal for resin infusion, ‘Reinforced Plastics’, 2004, Vol. 48, No. 8, pp. 345–368.
- [6] Myalski J., Określenie warunków infiltracji w infuzyjnej metodzie wytwarzania laminatów poliestrowo-szklanych, ‘Kompozyty’, 2009, Vol. 9, No. 2, pp. 138–143 [Determination of infiltration conditions in the infusion method of producing polyester-glass laminates — available in Polish].
- [7] Panasiuk K., Hajdukiewicz G., Production of composites with added waste polyester-glass with their initial mechanical properties, ‘Scientific Journals of the Maritime University of Szczecin’, 2017, Vol. 52, No. 124, pp. 30–36.
- [8] Pickering S. J., Recycling technologies for thermoset composite materials — current status, ‘Composites. Part A: Applied Science and Manufacturing’, 2006, Vol. 37, No. 8, pp. 1206–1215.
- [9] Sevostianov I. B., Verijenko U. E., Von Klemperer C. J., Chevallereau B., Mathematical model of stress formation during vacuum resin infusion process, ‘Composites. Part B’, Vol. 30, No. 5, pp. 513–521.
- [10] Wiliams C. D., Grove S. M., Summerscales J., The compression response of fibre-reinforced plastic plates during manufacture by the resin infusion under flexible tooling metod, ‘Composites. Part A’, 1998, Vol. 29, No. 1–2, pp. 111–114.
- [11] http://liteboat.fr/technology/[access 29.05.2018].
- [12] http://vectorply.com/infusion-success-starts-with-r2o/ [access 29.05.2018].
- [13] http://www.baltazarkompozyty.pl/index.php?option=com_content&view=article&id=224:technologie-wytwarzania-kompozytow-polimerowych-cz-1&catid=15&Itemid=46 [access 27.04.2018].
- [14] http://www.ciechzywice.pl/pl/produkty/chemia-organiczna/zywice/zywice-poliestrowenienasycone [access 27.04.2018].
- [15] https://archiwum.mos.gov.pl/g2/big/2013_03/59197ee6f23ffae7686d24b56e7687bd.pdf [access 27.04.2018].