Methods for determining mechanical losses of marine diesel engines

Leszek Wontka

doi:10.2478/sjpna-2018-0017

.blurhash-client-img { display: none !important; }

Methods for determining mechanical losses of marine diesel engines

Maritime Technical Journal

Volume 214 (2018): Issue 3 (September 2018)

By: Leszek Wontka

Open Access

|Sep 2018

Abstract

The paper presents based on literature critical evaluation of commonly known methods for determining the mechanical losses of a piston engine. Their advantages and disadvantages were pointed out also the possibility of their use in a marine propulsion system was assessed.

References

[1] Badania silników spalinowych — laboratorium, ed. W. Serdecki, Poznan University of Technology, Poznań 1998 [Tests of combustion engines — laboratory — available in Polish].
Search in Google Scholar Back to article
[2] Badania silników spalinowych, ed. W. Serdecki, Poznan University of Technology, Poznań 2012 [Tests of combustion engines — available in Polish].
Search in Google Scholar Back to article
[3] Chachulski K., Podstawy napędu okrętowego, Wyd. Morskie, Gdańsk 1988 [Basic of ship propulsion — available in Polish].
Search in Google Scholar Back to article
[4] Gola M., Januła J., Litwin J., Laboratorium silników spalinowych, red. A. Kowalewicz, Radom University of Technology, Radom 1996 [Combustion engines laboratory — available in Polish].
Search in Google Scholar Back to article
[5] Górski Z., Giernalczyk M., Siłownie okrętowe, cz. 1, Podstawy napędu i energetyki okrętowej, Maritime University of Gdynia, Gdynia 2014 [Basic of ship propulsion, part 1, Basic principles of ship propulsion and ship power engineering — available in Polish].
Search in Google Scholar Back to article
[6] Instrukcja obsługi siłowni okrętu projektu 620D [Manual of ship type 620D marine power plant maintenance — available in Polish].
Search in Google Scholar Back to article
[7] Instrukcja techniczno-ruchowa silnika okrętowego H. Cegielski-Sulzer typ A25, H. Cegielski — Poznań S.A., Poznań 1989 [Manual of marine engine H. Cegielski-Sulzer type A25 — available in Polish].
Search in Google Scholar Back to article
[8] Sarnowski C., Wrona J., Wyznaczanie sprawności mechanicznej silnika. Laboratorium silników spalinowych, red. A. Niewczas, Lublin University of Technology, Lublin 1996 [Measurement of engine mechanical efficiency. Combustion engine laboratory — available in Polish].
Search in Google Scholar Back to article
[9] Serdecki W., Krzymień P., The measurement of losses generated in kinematic nodes of engine run at test stand, ‘Journal of Polish CIMAC’, Faculty of Ocean Engineering and Ship Technology, Gdansk University of Technology, Gdańsk 2007.
Search in Google Scholar Back to article
[10] Wontka L., Straty mechaniczne jako diagnostyczny parametr stanu technicznego okrętowego tłokowego silnika spalinowego, PhD thesis, Polish Naval Academy, Gdynia 2017 [Mechanical losses as a marine diesel engine diagnostic parameter — available in Polish].
Search in Google Scholar Back to article