References
- Abou-Elfath, A., Ghobarah, A. (2000)Behavior of reinforced concrete frames rehabilitated with concentric steel bracing, Can. J. Civil Eng., 27: 433-444.
- ACI 318 (2005)Building Code Requirements for Structural Concrete (ACI 318-05), ACI Committee 318, American Concrete Institute, Farmington Hills, MI.
- AISC (1999)Load and resistance factor design specification for structural steel buildings. Chicago, IL: American Institute of Steel Construction Inc (AISC), 1999.
- AISC-05, ANSI/AISC 360 (2005)Specification for structural steel buildings, American Institute of Steel Construction, Chicago, 2005.
- ASTM A595 / A595M-14 (2014)Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use, ASTM International, West Conshohocken, PA, 2014.
- Bazzaz, M., Andalib, Z., Kheyroddin, A., Kafi, M. A. (2015)Numerical comparison of the seismic performance of steel rings in off-centre bracing system and diagonal bracing system. Steel and Comp. Struct., 19(4):917-937.
- Bush, T. D., Jones, E. A., Jirsa, J. O. (1991)Behavior of RC frame strengthened using structural-steel bracing. J Struct Eng-ASCE 1991; 117(4): 1115-26.
- Chopra, A. K. (2016)Dynamics of Structures; Theory and Applications to Earthquake Engineering, Prentice Hall.
- Ghaffarzadeh, H., Maheri, M. R. (2006)Cyclic tests on the internally braced RC frames, J. Seismology and Earthquake Engineering (JSEE); 8(3).
- Hassan O. F., Goel S. C. (1991)Modeling of bracing members and seismic behavior of concentrically braced steel structures. Research Report UMCE 91-1. Ann Arbor, MI: Department of Civil Engineering, University of Michigan.
- Khatib I. F., Mahin S. A., Pister K. S. (1988)Seismic behavior of concentrically braced steel frames. Report UCB/EERC-88/01. Berkeley, CA: Earthquake Engineering Research Center, University of California.
- Lorenzo, D. S. L., Scotta R., Lazzari, M. (2015)Optimal design of seismic retrofitting of RC frames with eccentric steel bracing. Bull. Earthq. Eng., 13(2):613-633.
- Maheri, M. R., Akbari, R. (2003)Seismic behavior factor, R, for steel X-braced and knee-braced RC buildings, Engineering Structures, 25(12): 1505-1513.
- Maheri, M. R., Ghaffarzadeh, H. (2008) Connection overstrength in steel-braced RC frames, Engineering Structures, 30(7): 1938-1948.
- Maheri, M. R., Kousari, R., Razazan, M. (2003)Pushover tests on steel X-braced and knee-braced RC frames. Eng Struct, 25(13): 1697-705.
- Maheri, M. R., Sahebi, A. (1995)Experimental investigation of the use steel bracing in reinforced concrete frames. Proc. of 2nd Int. Conf. on Seism. Earthq. Eng., Tehran, Iran, Vol. 1, pp.755-784.
- Maheri, M. R., Sahebi, A. (1997)Use of steel bracing in reinforced concrete frames. Eng Struct. 19(12): 1018-24.
- Majidzamani, S., Rasouli, M. (2006)Experimental investigation of behavior of Y-shaped concentric steel bracing. Asian J. Civil Eng., 7(1):81-94.
- Majidzamani, S., Vafaei, A., Aghakouchak, A. A., Desai, C. (2011)Experimental investigation of steel frames braced with symmetrical pairs of y-shaped concentric bracings. J. Steel Struct., 11(2):117-131.
- Majidzamani, S., Vafaei, A., Desaib, C., Rasouli M. (2012)Experimental investigation of behavior of steel frames with y-shaped concentric bracing, Journal of Construct. Steel Res., 70:12–27.
- Moghadam, H. A., Estekanchi, H. E. (1995)On the characteristics of offcenter bracing system, J Constr Steel Res, 35:361-76.
- Moghadam, H. A., Estekanchi, H. E. (1999)Seismic behavior of offcentre bracing system, J Constr Steel Res, 51:177-96.
- Ohishi, H., Takahashi, M., Yamazaki, Y. (1988)A seismic strengthening design and practice of an existing reinforced concrete school building in Shizuoka city, Proc. of 9th World Conference on Earthquake Engineering, Japan, VII, 415-420.
- Ramin, K., Fereidoonfar, M. (2015)Finite element modeling and nonlinear analysis for seismic assessment of off-diagonal steel braced RC frame. Int. J. Concrete Struct. and Mat., 9(1):89-118.
- Remennikov, A. M., Walpole, W. R. (1998)Seismic behavior and deterministic design procedures for steel V braced frames. Earthq Spectra, 14(2):335-55.
- SAP2000 (ver15.0) (2015)Software and manual. Berkeley, CA: CSI: Computers and Structures Inc.
- Sedaghati, P., Lotfollahi, M., Mofid, M. (2017)Parametric study and design approach for off-center bracing system, Struct. Design Tall Spec. Build. 26:e1311.
- Tagawa, Y., Aoki, H., Huang, T., Masuda, H. (1992)Experimental study of new seismic strengthening method for existing RC structure, Proc. of 10th World Conference on Earthquake Engineering, Rotterdam, 5193-5198.
- Tang, X., Goel, S. C. (1987)Seismic analysis and design considerations of braced steel structures. Research Report UMCE 87-4. Ann Arbor, MI: Department of Civil Engineering, University of Michigan.
- Tasnimi, A., Masoomi, A. (1999)Evaluation of response of reinforced concrete frames strengthened with steel bracing. Proceedings of the Third International Conference on Seismology and Earthquake Engineering, Iran.