References
- ACI 116R (2000)Cement and Concrete Terminology. ACI Committee 116, American Concrete Institute, Farmington Hills, USA.
- Bažant, Z.P. – Wu, S. T. (1973)Dirichlet Series Creep Function for Aging Concrete. Proceedings of the American Society of Civil Engineers, pp. 367-387, Reston (Virginia), USA.
- Freiesleben, H. – Hansen, P. – Pedersen, E. J. (1977)Måleinstrument til Kontrol af betons hærding (Measuring Instrument for Control of Concrete Cure). Nordisk Beton, No. 1, pp. 21-25, Stockholm, Sweden [in Swedish].
- Heinrich, P. J. – Schlicke, D. (2014)Normative Regelungen zur unbewehrten Ausführung von massigen Betonbauteilen (Design specifications for the construction of unreinforced concrete members). Proceedings of 2nd Grazer Betonkolloquium, Graz, University of Technology, Austria [in German].
- Heinrich, P. J. – Schlicke, D. (2016)Hardening induced stresses in very thick concrete members – insights from comprehensive FE-studies. Proceedings of the International RILEM Conference MSSCE 2016, Segment of Service Life of Cement-Based Materials and Structures Vol. 1, pp. 249-258, Copenhagen, Denmark.
- Heinrich, P. J. (in press, 2018)Effiziente Berechnung viskoelastischer Spannungen in gezwängten Betonbauteilen (Efficient method for determining viscoelastic stresses in restraint concrete members), Graz, University of Technology, Austria [in German].
- Jędrzejewska, A. – Bebodjema, F. – Lacarrière, L. – Azenha, M. – Schlicke, D. – Dal Pont, S. – Delaplace, A. – Granja, J. – Hájková, K. – Heinrich, P.J. – Sciumè, G. – Strieder, E. – Stierschneider, E. – Šmilauer, V. – Troyan, V. (2018)COST TU1404 benchmark on macroscopic modelling of concrete and concrete structures at early age: Proof-of-concept stage. Construction and Building Materials, Vol. 174, pp. 173-189, doi: 10.1016/j.conbuildmat.2018.04.08810.1016/j.conbuildmat.2018.04.088
- Jirásek, M. – Havlásek, P. (2014)Accurate approximations of concrete creep compliance functions based on continuous retardation spectra. Computers & Structures, Vol. 135, pp. 155-168, doi: 10.1016/j.compstruc.2014.01.02410.1016/j.compstruc.2014.01.024
- Jonasson, J. E. (1984)Slipform construction – calculation for assessing protection against early freezing. Swedish Cement and Concrete Research Institute, Fo/Research, Stockholm, Sweden.
- ÖNORM EN 1992-1-1 (2011)Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings. Österreichisches Normungsinstitut, Vienna, Austria.
- Schlicke, D. (2014)Mindestbewehrung zwangbeanspruchter Betonbauteile unter Berücksichtigung der erhärtungsbedingten Spannungsgeschichte und der Bauteilgeometrie (Minimum reinforcement of restraint concrete members considering the hydration-caused stress-history and geometry). Graz, University of Technology, Austria, doi: 10.3217/978-3-85125-363-4 [in German].10.3217/978-3-85125-363-4[]
- Schlicke, D. – Tue, N. V. (2015)Minimum reinforcement for crack width control in restrained concrete members considering the deformation compatibility. Structural Concrete, Vol. 16, doi: 10.1002/suco.20140005810.1002/suco.201400058
- Wesche, K. (1993)Baustoffe für tragende Bauteile – Band 2: Beton, Mauerwerk (nicht-metallische-anorganische Stoffe) (Building materials for structural members – Part 2: Concrete, Masonry (non-metallic-inorganic materials)). Bauverlag GmbH Wiesbaden und Berlin, 3. Ed., Berlin, Germany [in German].
- ZTV-W215 (2012)Zusätzliche Technische Vertragsbedingungen Wasserbau (ZTV-W) für Wasserbauwerke aus Beton und Stahlbeton (Leistungsbereich 215) (Additional technical conditions of contract in civil engineering hydraulics for hydraulic structures from concrete and reinforced concrete (work section 215)). Bundesministerium für Verkehr, Bau und Stadtentwicklung, Abteilung Wasserstraßen, Schifffahrt, Karlsruhe, Germany [in German].