References
- Basu P., Prezzi M. (2009): Design and Applications of Drilled Displacement (Screw) Piles. Publication FHWA/IN/JTRP-2009/28. West Lafayette: Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, http://docs.lib.purdue.edu/cgi/viewcontent.cgi.
- Bottiau M. (2006): Recent evolutions in deep foundation technologies. Proceedings of the DFI/EFFC 10th Int. Conf. On Piling and Deep Foundations, Amsterdam.
- Bustamante, M. and Gianeselli, L. (1998). Installation parameters and capacity of screwed piles. Proc. of Deep foundations on bored and auger piles, BAP III, Balkema, Rotterdam.
- Gwizdała K. (2010): Fundamenty palowe. Tom 1: Technologie i obliczenia (Pile foundations. Tom 1: Technologies and calculations). Warszawa: PWN, 297.
- Holeyman A.E. (2001): Screw piles – installation and design in stiff clay. Proc. of the Symp. on Screw Piles, Brussels, Belgium, Swets and Zeitlinger B.V., Lisse, 323.
- Holeyman, A. and Skov, R. (2003). Implementation of dynamic testing, Driving formulae, Monitoring and Quality design in pile design, Geotechnical problems with man-made and man influenced grounds. Proc. of the 13th European Conference on Soil Mechanics and Geotechnical Engineering, 25–28 August, Praha, Czech Republic, Vol. 3, 702–714.
- Kobrzyńska K., Kanty P., Jakubowski K. (2018). Analiza kalibracji wyników sondowań CPT z próbnymi odwiertami kolumn przemieszczeniowych CMC (Calibration analysis of CPT results with test drillings of CMC displacement columns). Przegląd Naukowy, Inżynieria i Kształtowanie Środowiska, 27(2). DOI: 10.22630/PNIKS.2018.27.2.17
- Konkol J. (2023), Incorporating installation effects into the probability analysis of controlled modulus columns. Soils and Foundations 63 (1), 101266, https://doi.org/10.1016/j.sandf.2022.101266
- Krasiński A. (2013). Pale przemieszczeniowe wkręcane. Współpraca z niespoistym podłożem gruntowym (Screw displacement piles. Bearing capacity and work in non-cohesive soils). (Habilitation thesis), Monografie Nr 134, Wydawnictwo Politechniki Gdańskiej, Gdańsk, 250 s.
- Krasiński A. (2014). The analysis of soil resistance during screw displacement pile installation. Studia Geotechnica et Mechanica, Vol. XXXVI, No. 3, 49–56, DOI: 10.2478/sgem-2014-0026.
- Krasiński A., Więcławski P., Kusio T., Wiszniewski M., Tisler W. (2022a). Raport końcowy z projektu badawczego „DPDT-Auger”, nr POIR.04.01.04-00-0124/18 „Opracowanie metody i narzędzi do wykonywania kolumn/pali przemieszczeniowych wkręcanych w różnorodnych warunkach gruntowych na obszarze Polski wraz z przygotowaniem metodyki do projektowania i odbioru robót”. (Final report from research project „DPDT-Auger”, nr POIR.04.01.04-00-0124/18 „Development of a method and tools for the installation of screw displacement columns/piles in various ground conditions in Poland, together with the preparation of a methodology for the design and acceptance of works”) (Unpublished data). Opracowanie tekstowe. Gdansk University of Technology. Gdansk, Poland.
- Krasiński A., Więcławski P., Wiszniewski M., Kusio T. (2022b). Model tests of cast-in-place piles formed by using different types of auger. Proc. of the 20th Int. Conf. on Soil Mechanics and Geotechnical Engineering, Australian Geomechanics Society, Sydney, 1227–1232.
- Krasiński A., Więcławski P., Kusio T., Wiszniewski M., Tisler W. (2023). Results of the „DPDT-Auger” research project on screw displacement piles. (Forthcoming), Architecture, Civil Engineering, Environment (ACEE).
- Maertens J., Huybrechts N. (2003): Belgian screw pile technology. Design and recent developments. Proc. of the Second Symp. on Screw Piles, Brussels: 2003. Swets and Zeitlinger B.V., Lisse, 349.
- Nesmith W.M. (2003). Installation effort as an indicator of displacement screw pile capacity. Deep Foundation on Bored and Auger Piles, BAP IV, Van Impe (ed.), Millpress, Rotterdam, 177–181.
- Nesmith Jr. W.M., Nesmith W.M. (2008). Installation effort: current calculation methods and uses in design and construction in the US. Deep Foundation on Bored and Auger Piles, BAP V, Ghent, Belgium.
- Pucker T., Grabe J. (2012). Numerical simulation of the installation process of full displacement piles. Computers and Geotechnics, 45, 93–106, http://dx.doi.org/10.1016/j.compgeo.2012.05.006
- Robertson, P.K. (1990). Soil classification using the cone penetration test. Canadian Geotechnical Journal, 27(1): 151–158.
- Sakr, M. (2014): Relationship between installation torque and axial capacities of helical piles in cohesionless soils. Canadian Geotechnical Journal, 52(6), 747–759, https://doi.org/10.1139/cgj-2013-0395.
- Saleem, M.A., Malik, A.A. and Kuwano, J. (2020). End shape and rotation effect on steel pipe pile installation effort and bearing resistance. Geomechanics and Engineering, 23(6), 523–533. https://doi.org/10.12989/gae.2020.23.6.523.
- Trojnar K., Siry A. (2019). Assessment of the resistance of displacement piles based on measurement of selected drilling parameters. Proc. of the 3rd Int. Conf. CGE, Zielona Góra.
- Tsuha, C.H.C., Aoki, N. (2010): Relationship between installation torque and uplift capacity of deep helical piles in sand. Canadian Geotechnical Journal, 47(6), 635–647, https://doi.org/10.1139/T09-128.
- VAN IMPE, W.F. (2001). Considerations on the influence of screw pile installation parameters on the overall pile behaviour. Screw piles – installation and design in stiff clay. Holeyman ed., Swets&Zeitlinger, Lisse, 127–149.
- Opis patentowy Nr PL 235442 B1 (2020): Świder do wykonywania pali przemieszczeniowych wkręcanych. (Patent description No. PL 235442 B1: Drill for screw displacement piles execusion). Patent Office of the Republic of Poland, 10.08.2020, Warsaw, Poland.
- PN-EN:1997-1:2008 - Eurocode 7: Geotechnical design – Part 1: General rules. European/Polish Committee for Standardization, Brussels/Warsaw.