References
- Rotter, J.M. 2001, “Guide for The Economic Design Of Circular Metal Silos”, Spon Press, London.
- Schulze, D., 2008. Powders and Bulk Solids – Behavior, Characterization Storage and Flow. Springer, Berlin.
- Strusch, J. and Schwedes, J. 1998. “Wall stress distributions in silos with inserts, and loads on inserts”, in: Brown, C.J., Nielsen, J. editors, “Silo Fundamentals of theory, behaviour and design”, E & FN Spon, pp.118–130. London.
- Wójcik, M., Härtl, J., Ooi, J.Y., Rotter, J.M., Ding, S., Enstad, G. 2007. “Experimental Investigation of the Flow Pattern and Wall Pressure Distribution in a Silo with a Double-ConeInsert.” Journal of. Part. Syst. Charact. 24, 2007, pp.296–303.
- Härtl, J., Ooi, J.Y., Rotter, J.M., Wojcik, M., Ding, S., Enstad, G.G. 2007. “The influence of a cone-in-cone insert on flow pattern and wall pressure in a full-scale silo”, Journal of chemical engineering research and design 86, 2008, pp. 370–378.
- Askifi, F, Hammadeh, H. 2013. “Study the effect of using proposed inserts in silo on flow pattern and wall pressure.” Damascus University, Syria, Vol 29-2, 2013
- Härtl, J., 2008. A Study of Granular Solids in Silos with and without an Insert. The University of Edinburgh (PhDThesis).
- Wojcik, M., Tejchman, J. 2008. “Application of an Uncoupled ALE-formulation to Confined Granular Flow in Silos.”, The 12th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG), 1–6 October, 2008, Goa, India.
- Wang, Y., Lu, Y., Ooi, J.Y. 2013. “Numerical modelling of dynamic pressure and flow in hopper discharge using the Arbitrary Lagrangian–Eulerian formulation.” Journal of Engineering Structures 56, pp. 1308–1320.
- Artoni, R., Santomaso, A., Canu, P. 2009. “Simulation of dense granular flows: Dynamics of wall stress in silos.” Journal of chemical engineering Science 64, 2009, pp 4040–4050.
- Artoni, R., Zugliano, A., Primavera, A., Canu, P., Santomaso, A. 2011. “Simulation of dense granular flows: Comparison with experiments.” Journal of Chemical Engineering Science 66, 2011, pp. 548–557.
- Silvia Volpato, S., Artoni, R., Santomaso, A. 2013. “Numerical study on the behavior of funnel flow silos with and without inserts through a continuum hydrodynamic approach.” Journal of chemical engineering research and design, 2013.
- Rombach, G.A., Neumann, F. “3-D Finite Element Modelling of Granular Flow in Silos”, The 17th ASCE Engineering Mechanics Conference, June 13–16, 2004, University of Delaware, Newark, DE.
- ABAQUS version 6.12-1. Dassault Systemes Simulia Corp., USA.
- Wojcik, M., Tejchman, J. 2007. “Numerical Simulations of Granular Material Flow In Silos with and without Insert.”, Archives of Civil Engineering. LIII.2.2007, pp. 293–322.
- Chen, J.F., Ooi, J.Y., Rotter, J.M., Batikha, M., Zhong, Z., Andreasson, B., Forsmo, S.E., Tano, K., Horrigmoe, G. 2007. “Finite element analysis of solid stresses in a silo with an inner tube”, University of Edinburgh.
- Wojcik, M., Tejchman, J., Enstad, G.G. 2012. “Confined granular flow in silos with inserts — Full-scale experiments.”, Journal of Powder Technology 222, 2012, pp. 15–36
- Yang, Y., Ooi, J., Rotter, M., Wang, Y. 2011. “Numerical analysis of silo behavior using non-coaxial models.” Journal of chemical engineering Science 66, 2011, pp 1715–1727.
- Johanson, J.R., Kleysteuber, K. 1996. “Flow corrective inserts in bin.” Chemical engineerin gprogress 62, 11, pp. 79–83
- Tuzun, U., Neddermaan, R,M,. 1983. “Flow of granular materials round obstacles.” Bulk solids handling, 3. pp 503–517.
- Karlsson, S., Klisinski, M., Runesson, K., 1998. “Finite element simulations of granular flow in plane silos with complicated geometry.” Powder Technology, 99, pp 29–39.
- Wieckowski, Z., 2002. “The dynamic analysis of large strain problems by the material point.” Proc. Of the fifth World Congress Computational Mechanics (WCCM-V), Vienna, Austria.
- Rombach G, Eibl J., 1998.” A dynamic finite element model for silo pressure and solids flow. “. In: Brown CJ, Nielsen J, editors. Silos, “fundamentals of theory behaviour and design.” E&FN SPON; pp. 481–94.
- Martinez MA, Alfaro I, Doblare M., 2002. “Simulation of axisymmetric discharging in metallic silos: analysis of the induced pressure distribution and comparison with different standards.” Eng Struct 24: pp. 1561–1574.
- Vidal P, Guaita M, Ayuga F., 2005. “Analysis of dynamic discharge pressures in cylindrical slender silos with a flat bottom or with a hopper: comparison with Eurocode 1.” Biosyst Eng; 91(3). pp. 335–348.
- Hammadeh H, Askifi F., Ubysz A., Maj M., Zeno A., 2019.”Effect of using insert on the flow pressure in cylindrical silo.” Studia Geotechnica et Mechanica; 41 (4), pp.177–183.
- Donea J, Huerta A., 2003. “Finite Element Methods for Flow Problems.” John Wiley & Sons Ltd, The Atrium, Southern Gate., England.
- Y. Wang, Y. Lu, J.Y. Ooi, 2015. “A numerical study of wall pressure and granular flow in a flat-bottomed silo”, Powder Technol. 282, pp. 43–54
- R.J. Goodey, Brown, C.J., Rotter, J.M. 2017. “Rectangular steel silos: Finite element predictions of filling wall pressures”. Engineering Structures, 132, pp. 61–69.