References
- Adach-Pawelus, K., Butra, J. & Pawelus, D. (2017). An Attempt at Evaluation of the Remnant Influence On the Occurrence of Seismic Phenomena in a Room-and-Pillar Mining System with Roof Deflection. Studia Geotechnica et Mechanica 39(2), 3-16. Retrieved August 1, 2017, from Walter de Gruyter GmbH: http://sgem.pwr.wroc.pl10.1515/sgem-2017-0011
- Burtan, Z., Zorychta, A., Cieślik, J. & Chlebowski, D. (2014). Influence of mining operating conditions on fault behavior. Archives of Mining Science. 59(3), 691-704. doi.org/10.2478/amsc-2014-0048
- Chlebowski, D., Burtan, Z. & Zorychta, A. (2018). Evaluation of rockburst hazard under abandoned mine workings. Archives of Mining Science 63(3), 687-699. Retrieved October 1, 2018, from Instytut Mechaniki Górotworu PAN: http://mining.archives.pl10.24425/123691
- Dębkowski, R., Madziarz, M., Sawicki, W. & Osadczuk, T. (2007). Measurements of load acting on expansive roof bolts affected by seismic events. Rudy i Metale Nieżelazne 52(8), 459-463.
- Fuławka, K., Mertuszka, P. & Pytel, W. (2018). Monitoring of the stability of underground workings in Polish copper mines conditions. E3S Web of Conferences 29, 1-14. Retrieved January 31, 2018, from EDP Sciences: http://www.e3s-conferences.org10.1051/e3sconf/20182900008
- Ivanović, A. & Neilson, R.D. (2013). Non-destructive testing of rock bolts for estimating total bolt length. International Journal of Rock Mechanics and Mining Sciences 64, 36-43. 10.1016/j.ijrmms.2013.08.017
- Kapusta, M. (2017). Wpływ osób dozoru górniczego na poprawę warunków bhp. Inżynieria Mineralna 18(2), 183-193. 10.29227/IM-2017-02-20
- Korzeniowski, W., Skrzypkowski, K. & Herezy, Ł. (2015). Laboratory method for evaluating the characteristics of expansion rock bolts subjected to axial tension. Archives of Mining Science 60(1), 209 - 224. 10.1515/amsc-2015-0014
- Korzeniowski, W., Skrzypkowski, K. & Herezy Ł. (2018). Zdalny, nieelektryczny wskaźnik WK-2/8 wartości siły obciążającej kotew w wyrobisku górniczym. Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią Polskiej Akademii Nauk 103, 53-64. 10.24425/123706
- Korzeniowski, W., Skrzypkowski, K. & Zagórski, K (2017). Reinforcement of underground excavation with expansion shell rock bolt equipped with deformable component. Studia Geotechnica et Mechanica 39(1), 39-52. Retrieved May 17, 2017, from Walter de Gruyter GmbH: http://sgem.pwr.wroc.pl0.1515/sgem-2017-0004
- Korzeniowski, W., Skrzypkowski, K., Herezy, Ł., Kulik, M. & Zagórski K. (2016). Patent RP nr PAT.226879. Sposób pomiaru obciążenia kotwy oraz dynamometryczna podkładka kotwowa. Akademia Górniczo-Hutnicza, Kraków. Biuletyn Urzędu Patentowego.
- Kwaśniewski, J., Dominik, I., Konieczny, J. & Lalik K. (2014). Patent RP nr 219351. Urządzenie do monitorowania zmian naprężeń. Akademia Górniczo-Hutnicza, Kraków. Biuletyn Urzędu Patentowego.
- Kwaśniewski, J., Dominik I., Lalik K., Korzeniowski W., Zagórski K. & Skrzypkowski K. (2016). Rock bolts health monitoring using self-excited phenomenon. Diffusion and Defect Data – Solid State Data. Part B, Solid State Phenomena 248, 186–191. 10.4028/www.scientific.net/SSP.248.186
- Małkowski, P., Ostrowski, Ł. & Bochenek, P. (2017). Modelling the Small Throw Fault Effect on the Stability of a Mining Roadway and Its Verification by In Situ Investigation. Energies 10,1-21. Retrieved December 7, 2017, from MDPI - Publisher of Open Access Journals: http://www.mdpi.com10.3390/en10122082
- Niedbalski, Z., Małkowski, P. & Majcherczyk, T. (2013). Monitoring of stand-and-roof-bolting support: design optimization. Acta Geodynamica and Geomaterialia 10( 2), 215–226.
- Prusek, S, Turek, M, Rotkegel, M. & Witek, M. (2012). Wybrane rozwiązania konstrukcyjne wskaźników obciążenia kotwi. Przegląd Górniczy. 5 37-44.
- Pytlik, A. & Pytlik, M. (2016). Czujniki do monitoring siły naciągu kotwi górniczych przy obciążeniach statycznych i dynamicznych. Przegląd Górniczy 11, 38-47.
- Pytlik, A., Prusek S. & Masny, W. (2016). A methodology for laboratory testing of rockbolts used in underground mines under dynamic loading conditions. Journal of the Southern African Institute of Mining and Metallurgy 116(12), 1101-1110. 0.17159/2411-9717/2016/v116n12a2
- Skrzypkowski, K. (2018). A new design of support for bust-prone rock mass in underground ore mining. E3S Web of Conferences 71, 1-9. Retrieved December 5, 2018, from EDP Sciences: http://www.e3s-conferences.org10.1051/e3sconf/20187100006
- Skrzypkowski K. (2018). Evaluation of rock bolt support for Polish hard rock mines. E3S Web of Conferences 35, 1-8. Retrieved March 23, 2018, from EDP Sciences: http://www.e3s-conferences.org10.1051/e3sconf/20183501006
- Skrzypkowski, K. (2018). Laboratory testing of a long expansion rock bolt support for energy-absorbing applications. E3S Web of Conferences 29, 1-9. Retrieved January 31, 2018, from EDP Sciences: http://www.e3s-conferences.org10.1051/e3sconf/20182900004
- Skrzypkowski, K., Korzeniowski, W., Zagórski, K. & Dudek, P. (2017). Application of long expansion rock bolt support in the underground mines of Legnica-Głogów copper district. Studia Geotechnica et Mechanica 39(3), 47-56. Retrieved November 18, 2017, from Walter de Gruyter GmbH: http://sgem.pwr.wroc.pl10.1515/sgem-2017-0029
- Song, G., Li, W., Wang, B. & Ho, S.C.M. (2017). A Review of Rock Bolt Monitoring Using Smart Sensors. Sensors 17(4), 1-24. Retrieved April 5, 2017, from MDPI - Publisher of Open Access Journals: http://www.mdpi.com10.3390/s17040776
- Staniek, A. (2005). Method for identification of grouting continuity of rock bolts. Archives of Mining Sciences 50(3), 371-396.
- Tajduś, A., Cała, M., Tajduś, K. (2018). Seismicity and rock burst hazard assessment in fault zones: a case study. Archives of Mining Sciences 63(3), 747-765. Retrieved October 1, 2018, from Instytut Mechaniki Górotworu PAN: http://mining.archives.pl10.24425/123695