References
- Algin, H. M. & Halil, M. (2009). Elastic settlement under eccentrically loaded rectangular surface footings on sand deposits. Journal of Geotechnical and Geoenvironmental Engineering .13510, pp. 1499–1508
- Azzouz, A. S. & Baligh, M. M. (1983). Loaded areas on cohesive slopes. J. Geotech. Eng. 10.1061/ (ASCE) 0733-9410(1983)109:5(724), pp. 724–729
- Badakhshan, E. & Noorzad, A. (2015). Load eccentricity effects on behaviour of circular footings reinforced with geogrid sheets. Journal of Rock Mechanics and Geotechnical Engineering7(6), 691–699. https://doi.org/10.1016/j.jrmge.2015.08.006
- Badakhshan, E. & Noorzad, A. (2017). Effect of footing shape and load eccentricity on behaviour of geosynthetic reinforced sand bed. Geotextiles and Geomembranes volume 45 issue 2, pp. 58–67
- Bowles, J. E. (1988). Foundation analysis and design. Mc Graw-Hill, New York 4th ed
- Bushra, S. A. & Rusul, S. H. (2013). Bearing capacity of eccentrically loaded square foundation on compacted reinforced dune sand over gypseous soil. Paper presented at journal of earth sciences and geotechnical engineering, vol 3 no. 4, pp. 47–62
- Cure, E., Turker, E., & Uzuner, B. A. (2014). Analytical and experimental study for ultimate loads of eccentrically loaded model strip footings near a sand slope. Ocean Engineering89 113–118. https://doi.org/10.1016/j.oceaneng.2014.07.018
- Georgiadis, K. (2010). Undrained bearing capacity of strip footings on slopes. J. Geotech. Eng. 10.1061 / (ASCE) GT.1943-5606.0000269 ,pp. 677–685
- Ghosh, P. & Kumar, J. (2005). Seismic bearing capacity of strip footings adjacent to slopes using the upper bound limit analysis. Electron.J.Geotech.Eng.10, bundle
- Graham, J., Andrews, M. & Shields, D. H. (1988). Stress characteristics for shallow footings in cohesionless slopes. Can. Geotech. J. 25(2), pp. 238–249
- Griffiths, D. V. (1982). Computation of bearing capacity factors using finite elements. Geotechnique, 32(3), pp. 105–202
- Highter, W.H. & ANDERS, J.C. (1985). Dimensioning footings subjected to eccentric loads. ASCE Journal of Geotechnical Engineering, 111 No. 5 pp. 659–665
- Khitas, N. E. H., Benmeddour, D., Mellas, M. & Mabrouki, A. (2017). The undrained bearing capacity of strip footings under eccentric loading: effect of soil-footing interface tensile strength. International Journal of Geotechnical Engineering 1–7. https://doi.org/10.1080/19386362.2017.1416570
- Krabbenhoft, S., Damkilde, L. & Krabbenhoft, K. (2014). Bearing capacity of strip footings in cohesionless soil subject to eccentric and inclined loads. International Journal of Geomechanics14(3), 04014003. https://doi.org/10.1061/(asce)gm.1943-5622.0000332
- Kusakabe, O., Kimura, T. & Yamaguchi, H. (1981). Bearing capacity of slopes under strip loads on the top surfaces. Soils Found. 21(4), pp. 29–40
- Mabrouki, A. & al. (2016). 2D numerical analysis of shallow foundation rested near slope under inclined loading. Procedia Engineering volume 143 pp. 623–634
- Mahiyar, H. & Patel, A. N. (2000). Analysis of angle shaped footing under eccentric loading
- Meyerhof, G.G. (1953). The bearing capacity of foundations under eccentric and inclined loads. In proc. of the 3rd Int. Conf, on SMFE .vol 1 pp. 440–445
- Meyerhof, G. G. (1957). The ultimate bearing capacity of foundations on slopes. ” Proceedings of the 4th Int. conf. S.M.F.E., vol. 3 pp. 384–386
- Meyerhof, G. G. (1963). Some recent research on the bearing capacity of foundations. Canadian Geotechnical Journal, vol. I No. 1, pp. 16–26
- Ouahab, M. Y., Mabrouki, A., Mellas, M., & Benmeddour, D. (2018). Effect of load eccentricity on the bearing capacity of strip footings on non-homogenous clay overlying bedrock. Transportation Infrastructure Geotechnology5(2), 169–186. https://doi.org/10.1007/s40515-018-0055-0
- Peynircioglu, H. (1948). Tests on bearing capacity of shallow` foundations horizontal top surfaces of sand fills and the behaviour of soils under such foundations. Proc., 2nd Int. Conf. On soil mechanics and foundation engineering, Rotterdam, Netherlands pp. 144–205
- Prakash, S. & Saran, S. (1971). Bearing capacity of eccentrically loaded footings. Journal of SM & FE division, ASCE 97 pp. 901–921
- Prandtl, G. (1921). Eindringen steifigkeit und festigkeit von schneiden, Angew. Math. U. Mech1 15
- Purkayastha, R. D. & Char, R. A. (1977). Stability analysis for eccentrically loaded footings. J. Geotech. Eng. 103(6), pp. 647–651
- Ramlot, C. & Vandeperre, L. (1950). Electric pylons of foundations: Their resistance to overturning their stability, their calculation. Research rep 2 IRSIA, France
- Shields, D., Neil, C. & Jacques, G. (1990). Bearing capacity of foundations in slopes. J. Geotech. Eng. 10.1061/ (ASCE) 0733-9410(1990)116:3(528), pp. 528–537
- Shukla, R. P. & Jakka, R. S. (2017). Critical setback distance for a footing resting on slopes. Acta Geotechnica Slovenica
- Terzaghi, K. (1943). Theoretical soil mechanics. Wiley and sons Inc New York5th ed
- Ueno, K., Miura, K. & Maeda, Y. (1998). Prediction of ultimate bearing capacity of surface footing with regard to size effects. Soils found .38(3), pp. 165–178
- Vesic, A.S. (1973b). Analysis of ultimate loads of shallow foundations. J. Soil mech. Found.Div, ASCE 99 No. SM1, 45–73
- Zhu, F. (1998). Centrifuge modelling and numerical analysis of bearing capacity of ring foundations on sand. Facdty of engineering and applied science Mernorial university of new foundland