References
- Benz, T. (2007). Small strain stiffness of soils and its numerical consequences. Ph.D. Dissertation. Universitat Sttutgart.
- Truty, A. (2008). Sztywność gruntów w zakresie małych odkształceń. Aspekty modelowania numerycznego. Czasopismo Techniczne, 3, 107-126.
- Santos, J.A., Correia, A.G. (2001). Reference threshold shear strain of soil. Its application to obtain a unique strain-dependent shear modulus curve for soil. In: Proceedings of 15th ICSMGE, Istanbul, Turkey, August 27-31, 2001, Vol. 1, AA Balkema, Rotterdam, pp. 267-270.
- Lo Presti, D.C.F. (1991). Discussion on “threshold strain in soil”. In: Proceedings of 10th ECSMFE, Firenze, Italy, pp. 1282-1283.
- Vucetic, M. (1994). Cyclic threshold shear strains in soils. Journal of Geotechnical Engineering, 120(12), 2208-2228.
- Tabata, K., Vucetic, M. (2010). Threshold shear strain for cyclic degradation of three clays. In: 5th International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego, CA, USA. On CD-ROM, Session 1a, Paper No. 1.15a, 12 p.
- Dyka, I. (2011). Use of the laboratory tests of soil modulus in modeling of pile behavior. Studia Geotechnica et Mechanica, 34, 53-61.
- Wichtmann, T., Triantafyllidis, T. (2010). On the influence of the grain size distribution curve on dynamic properties of quartz sand. In: Proceedings of 5th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, Paper No. 1.55a, May 24-29, 2010, San Diego, CA, USA.
- Mayne, P.W., Coop, M.R., Springman, S.M., Huang, A.B., Zornberg, J.G. (2009). Geomaterial behavior and testing. In: Proceedings of 17th ICSMGE, Alexandria, Egypt, pp. 2777-2872.
- Duncan, J.M., Chang, C.Y. (1970). Non-linear analysis of stress and strain in soils. Journal of Geotechnical Engineering (ASCE), 96(5), 1629-1653.
- Hardin, B.O., Drnevich, V.P. (1972). Shear modulus and damping in soils: design equations and curves. Journal of the Soil Mechanics and Foundations Division (ASCE), 98(SM7), 667-691.
- Kraft, L.M., Ray, R.P., Kagawa, T. (1981). Theoretical t-z curves. Journal of the Geotechnical Engineering Division (ASCE), 107(GT11), 1543-1561.
- Fahey, M., Carter, J.P. (1993). A finite element study of the pressuremeter test in sand using nonlinear elastic plastic model. Canadian Geotechnical Journal, 30, 348-362.
- Kuwabara, F. (1991). Settlement behavior of non-linear soil around single piles subjected to vertical loads. Soils and Foundations, 31(1), 39-46.
- Van Impe, W.F., De Clercq, Y. (1994). A piled raft interaction model. In: Proceedings of the 5th International Conference and Exhibition on Piling and Deep Foundations – DFI’94, Bruges, Belgium, pp. 1.3.1-1.3.10.
- Darendeli, M.B. (2001). Development of a new family of normalized modulus reduction and material damping curves. Ph.D. Thesis. The University of Texas at Austin, USA.
- Vardanega, P.J., Bolton, M.D. (2011). Practical methods to estimate the non-linear shear stiffness of clays and silts. In: Proceedings of 5th International Conference on the Deformation Characteristics of Geomaterials, Seoul, Korea, September 1-3, 2011, IOS Press, Amsterdam, Netherlands, pp. 372-379.
- Vardanega, P.J., Bolton, M. (2013). Stiffness of clays and silts: normalizing shear modulus and shear strain. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 139, 1575–1589.
- Srokosz, P., Dyka, I., Bujko, M. (2017). Badania sztywności gruntu w kolumnie rezonansowej. Monograph, Wydawnictwo UWM w Olsztynie.
- Srokosz, P., Bujko, M., Górska-Pawliczuk, A. (2015). Zastosowanie systemu klasyfikacyjnego do interpretacji wyników badań skrętnego ścinania gruntów. Inżynieria Morska i Geotechnika, 5, 686-692.
- Nelder, J.A., Mead, R. (1965). A simplex method for function minimization. Computer Journal, 7(4), 308-313.