Numerical Modeling and Parametric Optimization of the Press Plate for the Glass Compartment of a Three-Compartment Refuse Collection Vehicle with Variable Compartment Volumes
References
- Myers, R. H., Montgomery, D. C., Anderson-Cook, C. M. “Response Surface Methodology: Process and Product Optimization Using Designed Experiments”, Wiley, 2016.
- Simpson T. W., Mauery, T. M., Korte, J. J., Mistree, F. “Kriging models for global approximation in simulation-based multidisciplinary design optimization”, AIAA Journal 39, pp. 2233 – 2241, 2001.
- EP0790194A1, “Refuse collection and compaction vehicle, European Patent Application”.
- Kadyrov, A .S., Karsakova A. Zh., Donenbayev, B. S., Balabekova, K. “Establishing the strength characteristics of the lifting-leveling device structures of the VPO-3-3000 machines for the track straightening”, Communications - Scientific Letters of the University of Žilina 22 (4), pp. 70 – 79, 2020.
- Kadyrov, A. S., Pak, I. A., Ganyukov, A., Imanov, M. O., Balabekova, K. “Research of operation of equipment for ultrasonic purification of exhaust gases of internal combustion engines”, Journal of Engineering Physics and Thermophysics 94 (6). pp. 1407 – 1414, 2021.
- Kizdarbekova, M., Balabekova, K., Zabiyev, A., Konyrtaeva, K. “Improvement of the body structure for efficient collection of municipal waste”, Eurasian Journal of Applied Engineering and Technology (EJAET) 155 (2), pp. 163 – 172, 2026. DOI: 10.32523/3136-3385-2026-155-2-163-172
- Jebahi, M., Dau, F., Iordanoff, I., Guin, J.-P. “Virial stress-based model to simulate the silica glass densification with the discrete element method”, International Journal for Numerical Methods in Engineering 112 (13), pp. 1909 – 1925, 2017. DOI: 10.1002/nme.5589
- Roux, W. J., Stander, N., Haftka, R. T. “Response surface approximations for structural optimization”, International Journal for Numerical Methods in Engineering 42 (3), pp. 517–534, 1998. DOI: 10.1002/(SICI)1097-0207(19980615)42:3<;517::AID-NME370>3.0.CO;2-L
- Kenesbek, I., Togizbayeva, B. B., Balabekova, K., Sazambayeva, B. T. “Improvement of Crane Efficiency via Design Optimization”, Strojnícky časopis – Journal of Mechanical Engineering 76 (1), pp. 71 – 78, 2026. DOI: 10.2478/scjme-2026-0006
- Danyarova, A., Togizbayeva, B. B., Balabekova, K., Vlnka, J. “Investigation of Strength and Calculation of Wear Resistance of a Quick-Release Mechanism in Connection With the Working Attachment of a Hydraulic Excavator”, Strojnícky časopis – Journal of Mechanical Engineering 75 (1), pp. 9 – 16, 2025. DOI: 10.2478/scjme-2025-0002
- Togizbayeva, B. B., Zabiyeva, A. B., Balabekova, K., Kenesbek, A. B. “Development of a Calculation Method for Determining the Permissible Dimensions of the Defect 11”, Acta Polytechnica Hungarica 20 (4), pp. 249 – 267, 2023. DOI: 10.12700/APH.20.4.2023.4.14
- Lolov, D., Lilkova-Markova, S. “The Model of Interconnected Pipes in the Investigation of Dynamic Stability of Carbon Nanotubes Embedded in an Elastic Medium”, Strojnícky časopis – Journal of Mechanical Engineering 73 (2), pp. 93 – 98, 2023. DOI: 10.2478/scjme-2023-0024
- Choudhury, A., Chandra, S., Sarkar, S., & Karmakar, M. “Analysis of Simply Supported Laminated Composite Plate by Semi Analytical and Finite Element Method for Different Orientation Angles”, Strojnícky časopis – Journal of Mechanical Engineering 73 (2), pp. 45 – 70, 2023. DOI: 10.2478/scjme-2023-0021
- Baťa, M., Lazorík, A., Mazúr, S. “Design and Manufacturing of a High-Performance Battery Module for an Electric Racing Vehicle”, Strojnícky časopis – Journal of Mechanical Engineering 75 (2), pp. 1 – 20, 2025. DOI: 10.2478/scjme-2025-0019
- Szeliga, J., Kohut, J., Pleva, L., Frydrýšek, K., Čepica, D. “Measurement of Dosed Compression and Distraction of Tibia Fractures Treated with Ilizarov Circular External Fixation”, Strojnícky časopis – Journal of Mechanical Engineering 75 (2), pp. 97 – 110, 2025. DOI: 10.2478/scjme-2025-0027
- Welch, M. “Bolted Joint Preload Distribution from Torque Tightening”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 329 – 342, 2021. DOI: 10.2478/scjme-2021-0039
- Bider, Zs., “Influence of the Tolerances of the Threaded Joints on Preloaded Bolted Connection”, Strojnícky časopis – Journal of Mechanical Engineering 75 (1), pp. 173 – 178, 2025. DOI: 10.2478/scjme-2025-0018
- Dung, H. T., Do, D. T., Nguyen, V. T. “Comparison of Multi-Criteria Decision Making Methods Using The Same Data Standardization Method”, Strojnícky časopis – Journal of Mechanical Engineering 72 (2), pp. 57 – 72, 2022. DOI: 10.2478/scjme-2022-0016
- Pham, Q. M., Vu, V. T., Tran, L. Q., Nguyen, H. H., & Hong, T. D. “Study on Kinetics and Dynamics of the Scraping-Pressing Mechanism of the Compactor Garbage Truck”, FME Transactions, 52(4), pp. 603 – 615, 2024. DOI: 10.5937/fme2404603q
Language: English
Page range: 112 - 123
Published online: Nov 12, 2026
Published in print: Nov 1, 2026
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Makpal Kizdarbekova, Vitaliy Savinkin, Kyrmyzy Balabekova, Zhasulan Alipbayev, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.