Comparative Assessment of Continuous and Pulsed Fiber-Laser Cutting of CFRP Laminates
References
- Geier, N., Xu, J., Poór, D. I., Dege, J. H., Davim, J. P. “A Review on Advanced Cutting Tools and Technologies for Edge Trimming of Carbon Fibre Reinforced Polymer (CFRP) Composites”, Composites Part B: Engineering, Vol. 266, Art. 111037, 2023. DOI: 10.1016/j.compositesb.2023.111037
- Majko, J., Handrik, M., Vaško, M., Sága, M. “Influence of Fiber Deposition and Orientation on Stress Distribution in Specimens Produced Using 3D Printing”, Strojnícky časopis – Journal of Mechanical Engineering 69 (3), pp. 81 – 88, 2019. DOI: 10.2478/scjme-2019-0033
- Handrik, M., Vaško, M., Majko, J., Sága, M., Dorčiak, F. “Influence of the Shape of the Test Specimen Produced by 3D Printing on the Stress Distribution in the Matrix and in Long Reinforcing Fibers”, Strojnícky časopis – Journal of Mechanical Engineering 69 (3), pp. 61 – 68, 2019. DOI: 10.2478/scjme-2019-0030
- Li, M., Li, S., Yang, X., Zhang, Y., Liang, Z. “Fiber Laser Cutting of CFRP Laminates with Single- and Multi-Pass Strategy: A Feasibility Study”, Optics & Laser Technology 107, pp. 443 – 453, 2018. DOI: 10.1016/j.optlastec.2018.06.025
- Oh, S., Lee, I., Park, Y.-B., Ki, H. “Investigation of Cut Quality in Fiber Laser Cutting of CFRP”, Optics & Laser Technology 113, pp. 129 – 140, 2019. DOI: 10.1016/j.optlastec.2018.12.018
- Leone, C., Mingione, E., Genna, S. “Laser Cutting of CFRP by Quasi-Continuous Wave (QCW) Fibre Laser: Effect of Process Parameters and Analysis of the HAZ Index”, Composites Part B: Engineering 224, Art. 109146, 2021. DOI: 10.1016/j.compositesb.2021.109146
- Kelsey, D., Elkington, H., Jackson-Crisp, A., Harper, L., Marithmu, S., Voisey, K. T. “Laser Cutting of CFRP Using Novel Cutting Strategies”, Procedia CIRP 124, pp. 509 – 512, 2024. DOI: 10.1016/j.procir.2024.08.163
- Elkington, H., Diboine, J., Chingwena, K., Mason, B., Marimuthu, S. “Water Jet Guided Nanosecond Laser Cutting of CFRP”, Optics & Laser Technology 171, Art. 110460, 2024. DOI: 10.1016/j.optlastec.2023.110460
- Zhang, D., Zhang, W., Huang, T., Jiang, Q., Xue, G., Zhang, H., Wang, L., Sun, C. “Investigation of Carbon Fiber-Reinforced Epoxy Composite Cutting by Green Light Femtosecond Pulsed Laser”, Optics & Laser Technology 192, Art. 113678, 2025. DOI: 10.1016/j.optlastec.2025.113678
- Čačko, V., Čačková, I., Ferenczi, B., Šooš, Ľ., Shabu, S., Jačmeník, M. “Experimental Investigation and Optimization of Fiber Laser Cutting Parameters for Stainless Steel AISI 304”, Strojnícky časopis – Journal of Mechanical Engineering 76 (1), pp. 39 – 50, 2026. DOI: 10.2478/scjme-2026-0004
- Čačko, V., Čačková, I., Richtáriková, D., Šooš, Ľ. “Investigation of the Dependence of the Technological Parameters of Laser Cutting to Minimize the Deviation from the Nominal Dimensions of the Parts”, Strojnícky časopis – Journal of Mechanical Engineering 74 (3), pp. 1 – 14, 2024. DOI: 10.2478/scjme-2024-0029
- Čačková, I., Čačko, V., Ferenczi, B. “Influence of Fiber and CO₂ Laser Cutting Parameters on the Material Properties of Wear-Resistant Hardox 450 Steel”, Advances in Science and Technology 181, pp. 137 – 147, 2026. DOI: 10.4028/p-vU71fg
- MicroStep, spol. s r.o. “MSF Compact – Laser Cutting Machine”, [Online]. Available: https://www.microstep.sk/stroje/laserove-stroje/msf-compact/ [Accessed: 26 Aug. 2026].
Language: English
Page range: 76 - 85
Published online: Nov 12, 2026
Published in print: Nov 1, 2026
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Bálint Ferenczi, Viliam Čačko, Iveta Čačková, Shane Shabu, Alena Brusilová, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.