An Alternative Mooney-Rivlin Material Model with a Plastic Spin for Finite Strain Plasticity
By: Ladislav Écsi and Roland Jančo
References
- Bruhns, O.T. “History of Plasticity”, In: Altenbach, H., Öchsner, A. (eds.) Encyclopedia of Continuum Mechanics, 1st. ed., Springer, Berlin, Germany, 2020. pp. 1129–1190. DOI: 10.1007/978-3-662-55771-6
- Owen, D.R.J., Hinton E. “Finite Elements in Plasticity, Theory and Practice”, Pineridge Press. Swansea. UK, 1980. ISBN-10: 0906674050
- Bathe, K.J. “Finite Element Procedures”, Prentice-Hall INC. Englewood Cliffs. New Jersey. USA, 1995. ISBN-10: 0133014584
- Simo, J.C., Hughes, T.J.R. “Computational Inelasticity”, Springer. New York. USA,1998. ISBN: 978-0-387-97520-7.DOI: 10.1007/b98904
- Belytschko, T., Liu, W.K., Moran, B. “Nonlinear Finite Elements for Continua and Structures”, Wiley. Chichester, UK, 2000. ISBN-10: 9780471987734
- Crisfield, M.A. “Non-Linear Finite Element Analysis of Solids and Structures. Essentials“, Vol. 1. Wiley. Chichester. UK, 2000. ISBN-10: 0471929565
- Crisfield, M.A. “Non-Linear Finite Element Analysis of Solids and Structures, Advanced Topics”, Vol. 2. Wiley. Chichester. UK, 2001. ISBN-10: 047195649X
- Nemat-Nasser, S. “Plasticity, A Treatise on Finite Deformation of Heterogenous Inelastic Materials”, Cambridge University Press. Cambridge. UK, 2004. ISBN-10: 0521839793
- de Souza Neto, E.A., Perić, D., Owen, D.R.J. “Computational Methods for Plasticity, Theory and Applications”, Wiley. Singapore. Malaysia, 2008. ISBN: 9780470694527. DOI: 10.1002/9780470694626
- Bertram, A. “Elasticity and Plasticity of Large Deformations, An Introduction”, 3rd ed. Springer. Berlin, Germany, 2012. ISBN: 978-3-642-24614-2. DOI: 10.1007/978-3-642-24615-9
- Belyaev, A.K., Palmov, V.A. “Thermodynamic derivation of the heat conduction equation and the dynamic boundary value problem for thermoelastic materials and fluids”, Acta Mechanica, 114, pp. 27-37, 1996. DOI: 10.1007/BF01170393
- Bergander. H. “Finite plastic constitutive laws for finite deformations”, Acta Mechanica. 109, pp. 79 – 99, 1995. DOI: 10.1007/BF01176818
- Bruhns, O.T. “Eulerian elastoplasticity: basic issues and recent results”, Theoretical and Applied Mechanics. 36(3), pp. 167 – 205, 2009. DOI: 10.2298/TAM0903167B
- Palmov, V. “Vibrations of Elasto-Plastic Bodies”, 1st ed. Springer. Berlin. Germany, 1998. ISBN: 978-3-540-63724-0. DOI: 10.1007/978-3-540-69636-0
- Kojić, M., Bathe, K.J. “Studies of finite element procedures – Stress solution of a closed elastic strain paths with stretching and shearing using the updated Lagrangian Jaumann formulation”, Computers & Structures 26 (1-2), pp. 27 – 37, 1987. DOI: 10.1016/0045-7949(87)90247-1
- Meyers, A. Xiao, H., Bruhns, O.T. “Choice of objective rate in single parameter hypoelastic deformation cycles”, Computers & Structures 84 (17-18), pp. 1134 – 1140, 2006. DOI: 10.1016/j.compstruc.2006.01.012
- Simo, J.C., Pistner, K.S., “Remark on the rate of constitutive equations for finite deformation problems: Computational implications”, Computer Methods in Applied Mechanics and Engineering 46 (2), pp. 201 – 215, 1984. DOI: 10.1016/0045-7825(84)90062-8
- Moss, W.C. “On instabilities in large deformation simple shear loading”, Computer Methods in Applied Mechanics and Engineering. 46(3), pp. 329-338, 1984. DOI: 10.1016/0045-7825(84)90108-7
- Szabó, L., Balla, M. “Comparison of some stress rates”, International Journal of Solids and Structures 25 (3), pp. 279 – 297, 1989. DOI: 10.1016/0020-7683(89)90049-8
- Taylor, G.I. “Analysis of plastic strain in a cubic crystal”, In: Lessels, J.M. (ed.) Stephen Timoshenko 60th anniversary volume. Macmillan, New York, USA, 1938, pp. 218–224.
- Hill, R. “Generalized constitutive relations for incremental deformation of metal crystals by multislip”, Journal of the Mechanics and Physics of Solids 14 (2), pp. 95 – 102, 1966. DOI: 10.1016/0022-5096(66)90040-8
- Hill, R., Rice, J.R. “Constitutive analysis of elastic-plastic crystals at arbitrary strain”, Journal of the Mechanics and Physics of Solids. 20(6), pp. 401-413, 1972. DOI: 10.1016/0022-5096(72)90017-8
- Asaro, R.J., Rice, J.R. “Strain localization in ductile single crystals”, Journal of the Mechanics and Physics of Solids. 25 (5), pp. 309 – 338, 1977. DOI: https://doi.org/10.1016/0022-5096(77)90001-1
- Asaro, R.J. “Geometrical effects in the inhomogeneous deformation of ductile single crystals”, Acta Metallurgica 27 (3), pp. 445 - 453, 1979.
- Asaro, R.J. “Micromechanics of crystals and polycrystals”, Advances in Applied Mechanics 23, pp. 1 – 115, 1983. DOI: 10.1016/S0065-2156(08)70242-4
- Sansour, C., Bocko, J. “On the numerical implications of multiplicative inelasticity with an anisotropic elastic constitutive law”, International Journal for Numerical Methods in Engineering 58 (14), pp. 2131 – 2160, 2003. DOI: 10.1002/nme.848
- Hashiguchi, K. “Foundations of Elastoplasticity: Subloading Surface Model”, 3rd ed. Springer. Cham. Switzerland, 2017. ISBN: 978-3-319-48819-6, URL: https://books.google.sk/books?id=uajNDgAAQBAJ [Accessed: date 13. 3. 2026]
- Kalidindi, S.R. “Micro-mechanical finite element models for crystal plasticity”, In: Raabe, D., Roters, F., Barlat, F., Chen, L.Q. (eds.) Continuum Scale Simulation of Engineering Materials: Fundamentals - Microstructures - Process Applications, 1st ed., Wiley, Weinheim, Germany, 2004, pp. 529 – 542. DOI: 10.1002/3527603786
- Bonet, J., Wood, R.D. “Nonlinear Continuum Mechanics for Finite Element Analysis”, 2nd ed. Cambridge University Press, Cambridge, UK, 2008. DOI: 10.1017/CBO9780511755446
- Hackett, R.M. “Hyperelasticity primer”, 2nd ed., Springer, Cham, Switzerland, 2018. ISBN: 978-3-319-73200-8, DOI: 10.1007/978-3-319-73201-5
- Liu, R., Xue, Y., Li, S. “A general finite deformation hypoelastic-plasticity non-ordinary state-based peridynamics model and its applications”, Engineering with Computers 40, pp. 1-20, 2024. DOI: 10.1007/s00366-023-01792-0
- Hashiguchi, K. “Multiplicative Hyperelastic-Based Plasticity for Finite Elastoplastic Deformation/Sliding: A Comprehensive Review”, Archives of Computational Methods in Engineering. 26, pp. 597 – 637, 2019. DOI: 10.1007/s11831-018-9256-5
- Hashiguchi, K. “Multiplicative Hyperelastic-Based Plasticity with Subloading Surface Concept”, In: Hashiguchi, K. (ed.) Foundations of Elastoplasticity: Subloading Surface Model. Springer, Cham, Switzerland, 2023. pp. 501 – 548. DOI: 10.1007/978-3-030-93138-4
- ChunYu, M. “An anisotropic finite strain elastoplastic model considering different plastic spin effects on the intermediate configuration”, Mechanics Research Communications. 135, 104241, 2024. DOI: 10.1016/j.mechrescom.2023.104241
- Ulz, M.H., Celigoj, C.C. “A uniquely defined multiplicative elasto-plasticity model with orthotropic yield function and plastic spin”, Computer Methods in Applied Mechanics and Engineering, 374, 113565, 2021. DOI: 10.1016/j.cma.2020.113565
- Ulz, M.H., Celigoj, C.C. “An orthotropic plasticity model at finite strains with plasticity-induced evolution of orthotropy based on a covariant formulation”, Computer Methods in Applied Mechanics and Engineering, 401(B), 115567, 2022. DOI: 10.1016/j.cma.2022.115567
- Écsi, L. “An alternative Mooney-Rivlin material model for finite strain plasticity”, Strojnícky časopis – Journal of Mechanical Engineering, 76(1), pp. 189 – 204, 2026. DOI: 10.2478/scjme-2026-0017
- Dafalias Y.F: “Plastic spin: necessity or redundancy?” International Journal of Plasticity 14(9), pp. 909 – 931, 1998. DOI: 10.1016/S0749-6419(98)00036-9
- Zhang P., To A.C. “Transversely isotropic hyperelastic-viscoplastic model for glassy polymers with application to additive manufactured photopolymers”, International Journal of Plasticity 80, pp. 56 - 74, 2016. DOI: 10.1016/j.ijplas.2015.12.012
- Ulz M.H. “A finite isoclinic elasto-plasticity model with orthotropic yield function and notion of plastic spin”, Comput. Methods Appl. Mech. Engrg. 200 (20-21), pp. 1822 – 1832, 2011. DOI: 10.1016/j.cma.2011.01.020
- Eckart, C. “The thermodynamics of irreversible processes. IV. The theory of elasticity and anelasticity”, Physical Review 73 (373). 1948. DOI: 10.1103/PhysRev.73.373
- Slaughter WS. “The Linearized Theory of Elasticity”, New York: Springer, 2002. ISBN-978-1-4612-6608-2
- Schäfer HN, Schmidt JP. “Tensor Analysis and Elementary Differential Geometry for Physicists and Engineers”, Heidelberg: Springer, 2014. ISBN-978-3-662-43443-7
- “Continuum mechanics/Curl of a gradient of a vector”, On official website of Wikiversity, https://en.wikiversity.org/wiki/Continuum_mechanics/Curl_of_a_gradient_of_a_vector, accessed May 16 2019.
- Schey HM. “Div, grad, curl and all that, An informal text on vector calculus”, 3nd ed. NY: Norton & Company, 1997. ISBN-0-393-96997-5
- Écsi, L., Jerábek, R., Élesztős, P. “A Study on the ‘Compatiblity Assumption’ of Contemporary Multiplicative Plasicity Models”, Strojnícky časopis – Journal of Mechanical Engineering, 69(2), pp. 15-26, 2019. DOI: 10.2478/scjme-2019-0015
- Holzapfel, G.A. “Nonlinear Solid Mechanics, A Continuum Approach for Engineering”, Wiley, Chichester, UK. 2001. ISBN: 978-0-471-82319-3
- Écsi, L., Élesztős, P. “An Alternative Method for Modelling the Degradation of Hyperelastic Materials within the Framework of Finite-strain Elastoplasticity”, In: Öchsner, A. & Altenbach, H. (eds.) Engineering Design Applications II: Structures, Materials and Processes, Advanced Structured Materials. 113, Springer, Cham, Switzerland. pp. 59 – 82, 2020. DOI: 10.1007/978-3-030-20801-1
- Halama, R., Markopoulus, A., Šofer, M. Poruba, Z. Matušek, P. “Cyclic plastic properties of class C steel emphasizigon ratcheting: testing and modelling”, Stronícky časopis – Journal of Mechanical Engineering 65 (1), pp. 21 – 26, 2015. DOI: 10.1515/scjme-2016 0002
- Bucha, J., Danko, J., Milesich, T., Nemec, Magdolen, Ľ. “Comparison of FEM simulations of rubber- metal mount element”, Stronícky časopis – Journal of Mechanical Engineering 72 (1), pp. 15 – 22, 2022. DOI: 10.2478/scjme-2022-0002
Language: English
Page range: 54 - 74
Published online: Nov 12, 2026
Published in print: Nov 1, 2026
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Ladislav Écsi, Roland Jančo, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.