References
- Vanek, V. et al. “Geometric Specification of Complex Spatially Oriented and Compliant Components II”, Editor: Slavomir Hrcek, Abstracts of 59th International Conference of Ma-chine Design Departments, In: ICMD 2018 Demänovská dolina 11th - 14th September 2018, Place: University of Žilina, Faculty of Mechanical Engineering, Slovakia, 2018.
- Vanek, V., Polak, R. “Geometric Specification of Complex Spatially-Oriented and Compliant Components I.”, Editor: David Herak, Proceedings of 58th International Conference of Ma-chine Design Departments, In: ICMD 2017 Prague 6th-8th September 2017, Place: Czech Univeristy of Life Sciences, Prague, pp. 414 – 419, 2017. ISBN 978-80-213-2769-6
- Hosnedl, et al. “Design Science for Engineering Design Practice”, In: Eds. Culley S. et al., Proceedings of the ICED 01 3, Place: Glasgow, IMechE, London, pp. 363 – 370. 2001.
- Anderson, David M. “Design for manufacturability: how to use concurrent engineering to rapidly develop low-cost, high-quality products for lean production”, Boca Raton: CRC Press, c, 2014. ISBN 978-1-4822-0492-6
- Benavides, E. M. “Advanced engineering design: an integrated approach”, Cam-bridge: Woodhead Publishing, Woodhead Publishing in mechanical engineering, 2012. ISBN 978-0-85709-093-5
- Beitz, P. G., Wolfgang, Wallace, K., ed. “Engineering design: a systematic approach”, 2nd ed. London: Springer, 544 p., 1996. ISBN 3-540-19917-9.
- Shigley, J. E., Mischke, C. R. “Standard handbook of machine design”, 2nd ed. New York: McGraw-Hill, xvi, [1500 p.], 1996. ISBN 0-07-056958-4.
- Leach, R. K. “Fundamental principles of engineering nanometrology” Oxford: William Andrew, 2010. Micro and nano technologies [cit. 2021-05-05]. ISBN 978-0-08-096454-6. [online]. Available at: http://www.sciencedirect.com/science/book/9780080964546
- Smith, G. T. “Industrial metrology: surfaces and roundness”, Southampton: Springer xvi, 336 p., 2002. ISBN 1-85233-507-6.
- De Silva, G. M. S. “Basic Metrology for ISO 9000 certification”, 1st pub. Oxford: Butter-worth-Heinemann xiv, 214 p. 2002. ISBN 0-7506-5165-2.
- Daniilidis, C., Eben, K., Lindemann, U. “A functional analysis approach for product reengineering”, Procedia Eng 9 (9), pp. 270 – 280, 2011.
- František, T., Bocko J., Pástor M., Lengvarský P., Prada E. “The Finite Element Analysis of High Precision Positioning System”, Strojnícky časopis – Journal of Mechanical Engineering 68(4), pp. 41 – 48, 2018. DOI: 10.2478/scjme-2018-0045
- Vishwakarma, A. R., Phalle, V. M. “Effect of Tapered Interference Fit between Impeller and Shaft in Turbo Machines”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 25 – 32, 2018. DOI: 10.2478/scjme-2018-0024.