References
- Bayón, R., Zubizarreta, C., Nevshupa, R., Rodríguez, J. C., Fernández, X., Ruiz de Gopegui, U., Igartua, A. “Rolling sliding, scuffing and tribocorrosion behaviour of PVD multilayer coatings for gears application”, Industrial Lubrication and Tribology 63(1), pp. 17 – 26, 2011. DOI: 10.1108/00368791111101803
- Bobzin, K., Bagcivan, N., Goebbels, N., Yilmaz, K., Hoehn, B. R., Michaelis, K., Hochmann, M. “Lubricated PVD coatings for automotive applications”, Surface and Coatings Technology 204, pp. 1097 – 1101, 2009. DOI: 10.1016/J.SURFCOAT.2009.07.045.
- Bošanský, M., Rusnák, J. “Assessment of options for applications TiCN-MP + MoS2 deposited on the convex-concave gearing working in interaction with the ecological lubricant”, In: Proceedings of 58th International Conference of Machine Design Departments (ICMD 2017), Prague: Czech University of Life Sciences Prague, pp. 44 – 49, 2017.
- Bošanský, M., Vereš, M., Tököly, P., Vanya, A. “Non-standard Gears, Bratislava”, Slovak University of Technology in Bratislava, 159 p., 2012. ISBN 9788022737135. (In Slovak: Neštandardné ozubené prevody).
- Hatamleh, O., Smith, J., Cohen, D., Bradley, R. “Surface roughness and friction coefficient in peened friction stir welded 2195 aluminum alloy”, Applied Surface Science 255(16), pp. 7414 – 7426, 2009. DOI: 10.1016/J.APSUSC.2009.04.011.
- Hoehn, B. R., Oster, P., Tobie, T., Michaelis, K. “Test methods for gear lubricants”, Goriva i Maziva 47(2), pp. 129 – 157, 2008.
- ISO 14635-1. “Gear – FZG test procedures – Part 1: FZG test method A/8,3/90 for relative scuffing load carrying capacity of oils”, Geneva: International Organization for Standardization, 2000. 19 p.
- Kadnár, M., Rusnák, J., Tkáč, Z., Bošanský, M. “Tribological experiments in automobile industry”, Visnik Nacionaľnovo Techničnovo Universitetu “CHPI” 25, pp. 81 – 85, 2017.
- Magalhães, L., Martins, R., Oliveira, I., Seabra, J. “Comparison of tooth profiles and oil formulation focusing lower power losses”, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226(6), pp. 543 – 553, 2012. DOI: 10.1177/1350650112439260
- Moreno-Barcenas, A., Alvarado-Orozco, J. M., González Carmona, J. M., Mondragón-Rodríguez, G. C., González-Hernández, J., García-García, A. “Diamond-Like Carbon Coatings on Plasma Nitrided M2 Steel: Effect of Deposition Parameters on Adhesion Properties”, Surface and Coatings Technology 354, pp. 1 – 7, 2018.
- Niemann, G., Winter, H. “Maschinenelemente Band II: Getriebe – Zahnräder – Lager. 2”, vyd., Berlin: Springer, 2003. ISBN 978-3-540-43975-4
- Podgornik, B., Vizintin, J. “Wear resistance of plasma and pulse plasma nitrided gears”, In: VDI Berichte, no. 1665, Düsseldorf: VDI-Verlag, pp. 593 – 601, 2002.
- Rackov, M., Milovančević, M., Kanović, Ž., Vereš, M., Rafa, K., Banić, M., Miltenović, A. “Optimalization of HCR gearing geometry using generalized particle swarm optimalization algorithm”, Modern Methods of Construction Design 109(10), pp. 539 – 545, 2014.
- Ryazantsev, A., Nechaev, V., Rebrova, S., Vorontsov, B., Bondarenko, O., Protasov, R. “Evaluation of the quality parameters of the surface layer of parts after machining with plasma heating”, Strojnícky časopis – Journal of Mechanical Engineering 74 (1), pp. 123 – 134, 2024. DOI: 10.2478/scjme-2024-0013
- Schultheiß, H., Tobie, T., Stahl, K. “The effect of selected grease components on the wear behavior of grease lubricated gears”, Tribology International, 93, pp. 222 – 229, 2016. DOI: 10.1115/1.4031278
- Sommer, M., Sitzmann, A., Hantzsche, K., Tobie, T., Stahl, K., Fechte Heinen, R., Hoja, S. “Optimized compound layer design for highly loaded nitrided gears”, Journal of Materials Engineering and Performance 33, pp. 13293 – 13310, 2024. DOI: 10.1007/S11665-024-09659-1
- STN 656280:1985. “Lubricants. Mechanical testing of lubricants in the FZG gear ring test machine”, Bratislava: Slovak Office of Standards, Metrology and Testing, 1985.
- Tkach, P., Reviakina, O., Kryvosheia, A., Melnyk, V., Ustynenko, O., Protasov, R. “Meshing characteristics of profile shifted cylindrical quasi-involute arc-tooth-trace gears. Part 1. Theoretical base”, Strojnícky časopis – Journal of Mechanical Engineering 72 (2), pp. 201 – 210, 2022. DOI: 10.2478/scjme-2022-0029