References
- Baptista, A., Silva, F., Porteiro, J., Míguez, J., Pinto, G. “Sputtering Physical Vapour Depo-sition (PVD) Coatings: A Critical Review on Process Improvement and Market Trend Demands”, Coatings 8(11), 402, 2018.
- Mrkvica, I., Szotkowski, T., Slaninkova, A., Jurga, T. “High-Efficiency of PVD Coating Process by Applying an Additional Rotation”, Coatings 12(6), 834, 2022.
- Vereš, M., Bošanský, M., Gaduš, J. “Theory of convex-concave and plane cylindrical gearing”, STU Bratislava: Bratislava, Slovakia, 2006.
- Vereš, M., Bošanský, M., Rackov, M. “Theoretical and Experimental Research of the HCR Gear’s Contact Strength”, Machine Design 3(2), pp. 105 – 108, 2011.
- Bodzás, S. “Tooth Contact Analysis of Helical Gears Having Modified Straight Teeth by Changing of the Number of Teeth on the Pinion”, Strojnícky časopis – Journal of Mechanical Engineering 70 (1), pp. 1 – 16, 2020. DOI: 10.2478/scjme-2020-0001
- Ustynenko, O., Cherelev, S., Ondruška, J., Protasov, R., Yepifanov, V., Bondarenko, O., Andrienko S. “Optimal Design of Spur Gears with Increased Contact Ratio”, Strojnícky časopis – Journal of Mechanical Engineering 75 (1), pp. 163 – 172, 2025. DOI: 10.2478/scjme-2025-0017
- Švec, P., Bošanský, M., Gondár, E., Toth, F., Protasov, R. “Wear of AlCrN and CrAlSiN Coatings Applied to Nonstandard Involute Gears”, Lubricants 9(5), 54, 2021.
- Radzevich, S.P. “Theory of Gearing: Kinematics, Geometry, and Synthesis”, 3rd Edition, CRC Press, Boca Raton, FL, 1128 pages, 2022.
- Mattox, D.M. “Handbook of Physical Vapor Deposition (PVD) Processing”, William Andrew: Amsterdam, The Netherlands, p. 792, 2010.
- ANSYS Homepage, https://www.ansys.com/blog/top-5-reasons-solder-joint-failure, last accessed 2023/10/30.
- ISO 14635-1:2000, Gears – FZG test procedures, International Organization for Standardization: Geneva, Switzerland.
- Zienkiewicz, O.C., Taylor, R.L. “The Finite Element Method for Solid and Structural Mechanics”, 6th ed. Elsevier: Amsterdam, Netherlands, 2005.
- Kurowski, P. M. “Finite Element Analysis for Design Engineers”, 2nd ed., SAE International, Warrendale, USA, 2017.
- Goldfarb, V., Trubachev, E., Barmina, N. “Advanced gear engineering”, Springer, Switzerland, 2018.
- Tickoo, S. “SOLIDWORKS 2022 for Designers”, 20th Edition, Purdue Univ. and CADCIM Technologies, 2022.