References
- Cantero-Chinchilla, S., Aranguren, G., Royo, J.M., Chiachío, M., Etxaniz, J., Calvo-Echenique, A. “Structural Health Monitoring Using Ultrasonic Guided-Waves and the Degree of Health Index”, Sensors, 21(3), p. 993, 2021. DOI: 10.3390/s21030993
- He, J.H., Liu, D.P., Chung, C.H., Huang, H.H. “Infrared Thermography Measurement for Vibration-Based Structural Health Monitoring in Low-Visibility Harsh Environments”, Sensors 20(24), p. 7067, 2020. DOI: 10.3390/s20247067
- Srinivas, V., Ramanjaneyulu, K., Jeyasehar, C.A. “Multi-stage approach for structural damage identification using modal strain energy and evolutionary optimization techniques”, Structural Health Monitoring 10 (2), 2010. DOI: 10.1177/1475921710373291
- Cawley, P., Adams, R.D. “The location of defects in structures from measurements of natural frequencies”, The Journal of Strain Analysis for Engineering Design 14(2), pp. 49 – 57, 1979. DOI: 10.1243/03093247V142049
- Knak, M., Wojtczak, E.J., Rucka, M. “Non-Destructive Diagnostics of Concrete Beams Strengthened with Steel Plates Using Modal Analysis and Wavelet Transform”, Materials 14(11), p. 3014, 2021. DOI: 10.3390/ma14113014
- Koushik, R., Samit, R.C. “Fundamental mode shape and its derivatives in structural damage localization”, Journal of Sound and Vibration 332(24), pp. 5584 – 5593, 2013. DOI: 10.1016/j.jsv.2013.05.003
- Maia, N.M.M., Silva, J.M.M., Almas, E.A.M., Sampaio, R.P.C. “Damage Detection in Structures: From Mode Shape to Frequency Response Function Methods”, Mechanical Systems and Signal Processing 17(3), pp. 489 – 498, 2003. DOI: 10.1006/mssp.2002.1506
- Musil, M., Havelka, F., Chlebo, O., Úradníček, J., Gašparovič, Ľ., Páleník, M. “Diagnostics of Loose Clamping Joints”, In: Engineering Mechanics, Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, Prague, Czechia, 2022, pp. 273–276. ISBN 978-80-86246-48-2
- Musil, M., Úradníček, J., Páleník, M. “Localization of a local stiffness decrease”, In: Engineering Mechanics 2023, Palermo, Italy, 2023. DOI: 10.21495/em2023-171
- Lacidogna, G., Piana, G., Carpinteri, A. “Damage monitoring of three-point bending concrete specimens by acoustic emission and resonant frequency analysis”, Engineering Fracture Mechanics 210, pp. 203 – 211, 2019. DOI: 10.1016/j.engfracmech.2019.01.035
- Titurus, B., Yuan, J., Scarpa, F., Patsias, S., Pattison, S. “Impact hammer-based analysis of nonlinear effects in bolted lap joint”, Proceedings of ISMA 2016 – International Conference on Noise and Vibration Engineering and USD 2016 – International Conference on Uncertainty in Structural Dynamics, 2016.
- Kourehli, S. S. “Damage Diagnosis of Structures Using Modal Data and Static Response”, Periodica Polytechnica Civil Engineering 61(1), pp. 135 – 145, 2017. DOI: 10.3311/PPci.7646
- Salawu, O. S. “Detection of structural damage through changes in frequency: A review”, Engineering Structures, 19 (9), pp. 718 – 723, 1997. DOI: 10.1016/S0141-0296(96)00149-6
- Alemang, R.J. “The Modal Assurance Criterion (MAC): Twenty Years of Use and Abuse”, Sound and Vibration 37(8), pp. 14 – 23, 2003.
- He, J.H., Liu, D.P., Chung, C.H., Huang, H.H. “Infrared Thermography Measurement for Vibration-Based Structural Health Monitoring in Low-Visibility Harsh Environments”, Sensors, 20 (24), p. 7067, 2020. DOI: 10.3390/s20247067
- He, J.J., Zhou, Y.B. “A novel mode shape reconstruction method for damage diagnosis of cracked beam”, Mechanical Systems and Signal Processing 136, p. 106511, 2020. DOI: 10.1016/j.ymssp.2019.106511
- Khoshnoudian, F., Esfandiari, A. “Structural damage diagnosis using modal data”, Scientia Iranica 18 (4), pp. 853 – 860, 2011. DOI: 10.1016/j.scient.2011.07.012
- Zienkiewicz, O.C., Taylor, R.L., Zhu, J.Z. “The Finite Element Method: Its Basis and Fundamentals”, 7th ed., Butterworth-Heinemann, Oxford, UK, 2013. DOI: 10.1016/B978-1-85617-633-0.00019-8
- Bathe, K.J. “Finite Element Procedures”, 2nd ed., Prentice-Hall, Upper Saddle River, USA, 2014. ISBN 978-0979004957
- Ewins, D.J. “Modal Testing: Theory and Practice”, 1st ed., Research Studies Press Ltd., Letchworth, UK, 1984.
- Friswell, M.I., Mottershead, J.E. “Finite Element Model Updating in Structural Dynamics”, 1st ed., Kluwer Academic Publishers, Dordrecht, Netherlands, 1995. ISBN 079233615X
- Majid, J. - O., Mohammad Reza, M. S. “Investigation of defect effects on adhesively bonded joint strength using cohesive zone modeling”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 5 – 24, 2018. DOI: 10.2478/scjme-2018-0023
- Dessi, D., Camerlengo, G. “Damage identification techniques via modal curvature analysis: Overview and comparison”, Mechanical Systems and Signal Processing 52 – 53, pp. 181 – 205, 2015. DOI: 10.1016/j.ymssp.2014.05.031
- Nessaib, K., Abdelaziz, L. “Multi Sources Information Fusion Based on Bayesian Network Method to Improve the Fault Prediction of Centrifugal Compressor”, Strojnícky časopis – Journal of Mechanical Engineering 72 (1), pp. 109 – 124, 2022. DOI: 10.2478/scjme-2022-0011
- Welch, M. “A Paradigm for the Analysis of Preloaded Bolted Joints”, Strojnícky časopis – Journal of Mechanical Engineering 69 (1), pp. 143 – 152, 2019. DOI: 10.2478/scjme-2019-0012
- Srinivas, V., Ramanjaneyulu, K., Jeyasehar, C.A. “Multi-stage approach for structural damage identification using modal strain energy and evolutionary optimization techniques”, Structural Health Monitoring, 10 (2), 2010. DOI: 10.1177/1475921710373291