References
- van Druenen, T., Blocken, B. “CFD simulations of cyclist aerodynamics: Impact of computational parameters”, Journal of Wind Engineering and Industrial Aerodynamics 249, 105714, 2024.
- Santironnarong, S., Juntasaro, E. “Behavior of Generalized K-Omega (GEKO) Parameter on Performance Prediction of Airfoils Operating in Incompressible Region”, 2024. [online] Available at: https://www.dti.or.th/page_bx.php?lang=eng&cid=326&cno=7696
- Mosele, J. P. G., Gross, A., Slater, J. W. “Numerical Investigation of Flow Over”, Periodic Hill. In AIAA Aviation 2022 Forum (p. 3228), 2022.
- Strokach, E., Borovik, I., & Haidn, O. “Simulation of the GOx/GCH4 multi-element combustor including the effects of radiation and algebraic variable turbulent prandtl approaches”, Energies 13(19), 5009, 2020.
- Kutiš, V., et al. “CFD Analysis of Downcomer of Nuclear Reactor VVER 440”, Strojnícky časopis – Journal of Mechanical Engineering 66 (2), pp. 55 – 62, 2016. DOI: 10.1515/scjme-2016-0018
- Kutiš, V., et al. “CFD Analysis of Dry Cask Nuclear Fuel Storage”, Strojnícky časopis - Journal of Mechanical Engineering 69 (3), pp. 75 – 80, 2019. DOI: 10.2478/scjme-2019-0032
- Lolov, D. “Dynamic Stability of A Single Walled Carbon Nanotube, Embedded in A Polymer Matrix and Conveying A Pulsatile Flow”, Strojnícky časopis – Journal of Mechanical Engineering 75 (1), pp. 87 – 94, 2025. DOI: 10.2478/scjme-2025-0009
- Mellen, C. P., Fröhlich, J., Rodi, W. “Lessons from direct numerical simulation and large eddy simulation for Reynolds-averaged Navier–Stokes modelling of wall-bounded flows”, Journal of Fluid Mechanics, 1–35, 2000. DOI: 10.1017/S002211200000217X
- Temmerman, L., Leschziner, M. A., Mellen, C. P., Fröhlich, J. “Investigation of wall-function approximations and Reynolds-stress modeling in the prediction of separated flow in a curved duct”, International Journal of Heat and Fluid Flow 24(2), pp. 157 – 168, 2003. DOI: 10.1016/S0142-727X(02)00207-7
- Hussein, H. J., Martinuzzi, R. J. “Energy balance for turbulent flow around a surface mounted cube placed in a channel”, Physics of Fluids 8(3), pp. 764 – 780, 1996. DOI: 10.1063/1.868850
- Ganatra, K. A., Chattopadhyay, H., Mathur, A. “Investigation of free and impinging jets using generalized k–ω (GEKO) turbulence model”, International Journal of Heat and Fluid Flow 111, 109660, 2025.
- Strokach, E., Borovik, I., Chen, F. “Numerical simulation of reacting flow in the combustion chamber and study of the impact of turbulent diffusion coefficients”, Advances in Mechanical Engineering, 12(9), 1687814020954974, 2020.
- Rossano, V., De Stefano, G. “Testing a generalized two-equation turbulence model for computational aerodynamics of a mid-range aircraft”, Applied Sciences 13 (20), 11243, 2023.
- Murodil, Madaliev, et al. “Numerical Study of Three-Phase Liquid-Gas-Solid Flow in Single and Group Hydrocyclones”, Strojnícky časopis – Journal of Mechanical Engineering 75 (1), pp. 103 – 110, 2025. DOI: 10.2478/scjme-2025-0011
- Pacoň, L., et al. “Prediction of Pulsating Turbine Operation Using 1-D - 3-D Co-Simulation”, Strojnícky časopis – Journal of Mechanical Engineering 72 (3), pp. 81 – 96, 2022. DOI: 10.2478/scjme-2022-0043
- Almeida, G. P., Durao, D. F. G., Heitor, M. V. “Wake flows behind two dimensional model hills”, Exp. Thermal and Fluid Science 7, p. 87, 1992.
- Almeida, G.P., Durao, D.F.G., Simoes, J.P., Heitor, M.V. “Laser-Doppler measurements of fully developed turbulent channel flow”, Proc. 5th Symp. Appl Laser Techniques to Fluid Mech., pp. 5 – 12, 1990.
- Hunt, J.C.R., Snyder, W.H. “Experiments on stably and neutrally stratified flow over a model three-dimensional hill”, J. Fluid Mech. 96, pp. 671 – 704, 1980.
- Castro, J.P., Haque, A. “The structure of a turbulent shear layer bounding a separation region”, J. Fluid Mech. 179, pp. 439 – 468, 1987.
- Malikov, Z. M., Nazarov, F. K. “Study of turbulence models for calculating a strongly swirling flow in an abrupt expanding channel”, Computer research and modeling 13 (4), pp. 793 – 805, 2021.
- Madaliev, M., Usmonov, M., Kadyrov, K., Abdullajonov, N., Mavlonova, D., Otakhanova, Z., Muminov, K. “Numerical analysis of single SC-50-800 and SC-50-500x2-x4 group centrifugal cyclones: efficiency comparison”, In E3S Web of Conferences (Vol. 508, p. 06005). EDP Sciences, 2024.
- Malikov, Z. M., Madaliev, M. E. “Mathematical modeling of a turbulent flow in a centrifugal separator”, Vestnik Tomskogo Gosudarstvennogo Universiteta. Matematika i Mekhanika 71, pp. 121 – 138, 2021.
- Li, Z., Liu, Y., Zhou, W., Wen, X., Liu, Y. “Thermal pollution level reduction by sweeping jet-based enhanced heat dissipation: A numerical study with calibrated Generalized k-ω (GEKO) model”, Applied Thermal Engineering 204, 117990, 2022.
- Nilufar, K. “Numerical Simulation of Aerodynamic Flow Around a Building Using OpenFOAM Software”, Journal of Construction and Engineering Technology 3(2), pp. 8 – 14, 2025. DOI: 10.24412/2181-4473-2025.3.202
- Utbosarov, S., Muminov, O. “Analysis of CFD Modeling of the Karkidon Reservoir Spillway Operation Using the SST Turbulent Model”, Journal of Construction and Engineering Technology 3(1), pp. 1 – 15, 2025. DOI: 10.24412/2181-4473-2025.3.101
- ANSYS Inc. (2024). “Generalized k-ω (GEKO) Two-Equation Turbulence Modeling in Ansys CFD”. [online] Available at: https://www.ansys.com/resource-center/technical-paper/best-practice-geko-turbulence-modeling-in-ansys-cfd
- Menter, F. R. “Two-equation eddy-viscosity turbulence models for engineering applications”, AIAA Journal 32 (8), pp. 1598 – 1605, 1994.
- Eisfeld, B., Rumsey, C., Togiti, V. “Erratum: Verification and Validation of a Second-Moment-Closure Model,” AIAA Journal 54 (9), p. 2926, 2016. DOI: 10.2514/1.J055336
- Cecora, R.-D., Radespiel, R., Eisfeld, B., Probst, A. “Differential Reynolds-Stress Modeling for Aeronautics”, AIAA Journal 53 (3), pp. 739 – 755, 2015. DOI: 10.2514/1.J053250
- Cecora, R.-D., Eisfeld, B., Probst, A., Crippa, S., Radespiel, R. “Differential Reynolds Stress Modeling for Aeronautics”, AIAA Paper 2012 – 0465, 2012. DOI: 10.2514/6.2012-465
- Eisfeld, B. “Implementation of Reynolds Stress Models into the DLR-FLOWer Code”, Institutsbericht, DLR-IB 124-2004/31, Report of the Institute of Aerodynamics and Flow Technology, Braunschweig, ISSN 1614-7790, 2004.