Optimal Design of Spur Gears With Increased Contact Ratio
By:
References
- Pavlyshhe, V. T. "Osnovy konstrujuvannja ta rozrahunok detalej mashyn", Afisha Publ., L'viv, Ukraine, 2003.
- Radzevich, Stephen P. "High-Conformal gearing. Kinematics and Geometry", CRC Pres, Boca Raton, USA, 2016. ISBN 9-7804-2915-5727, DOI: 10.1201/b19332
- Pavlov, A. I. "Sovremennaya teoriya zubhcatikh zaceplenij", KhNADU Publ., Kharkov, Ukraine, 2005.
- Vereš, M., Bošanský, M., Gaduš, J. "Theory of Convex-Concave and plane cylindrical gearing", STU, Bratislava, Slovakia, 2006.
- Tkach, P., Reviakina, O., Kryvosheia, A., Melnyk, V., Ustynenko, O., Protasov, R. "Meshing Characteristics of Profile Shifted Cylindrical Quasi-Involute Arc-Tooth-Trace Gears. Part 1. Theoretical Base", Strojnícky časopis–Journal of Mechanical Engineering 72 (2), рp. 201–210, 2022. DOI: 10.2478/scjme-2022-0029
- Edited by Radzevich, Stephen P. "Dudley’s Handbook of Practical Gear Design and Manufacture", 4th Edition, CRC Pres, Boca Raton, USA, 2022.
- Chanho, Ch., Hyoungjong, A., Young-jun, P., Geun-ho, L., Su-chul, K. "Influence of gear tooth addendum and dedendum on the helical gear optimization considering mass, efficiency, and transmission error", Mechanism and Machine Theory 166, No. of article 104476, December 2021. Available at: https://www.sciencedirect.com/science/article/abs/pii/S0094114X21002342.
- Rameshkumar, M., Sivakumar, P., Sundaresh S., Gopinath K. "Load Sharing Analysis of High-Contact-Ratio Spur Gears in Military Tracked Vehicle Applications", Gear Technology, pp. 43–50, July 2010.
- Rackov, M. "Optimization of HCR Gearing Geometry from Scuffing Point of View", PhD Thesis, STU in Bratislava, 2014.
- Vereš, M., Bošanský, M. "Optimization of the HCR gearing from pitting damage point of view", MM Science Journal 2017 (03), pp. 1825–1828, 2017. DOI: 10.17973/MMSJ.2017_06_201704
- Bošanský, M., Tóth, F Rusnák, J. "Possibilities of application of hard thin coatings in HCR gearing working in interaction with ecological lubricant", Bulletin of the National Technical University «KhPI» Series Engineering and CAD, pp. 40–43, 2018. DOI: 10.20998/2079-0775.2018.25.09.
- Bošanský, M., Tóth, F., Gulan, L., Rusnák, J., Furstenzeller, A. "Scuffing Resistance of 16MnCr5 HCR TiAlCN-Coated Gears", In book: Current Methods of Construction Design, pp.445–452, 2020. DOI: 10.1007/978-3-030-33146-7_51
- Bunakov, Ju. N., Ustinenko, A. V. "Vybor racional'nogo kojefficienta vysoty zuba", Teorija mehanizmov i mashin 44, pp. 7–9, 1988.
- Cherelev, S., Ustynenko, O., Bondarenko, O., Protasov, R., Andrienko, S. "Matematychna model' optymizacii' zubchastyh peredach iz pidvyshhenym koeficijentom perekryttja", Suchasni problemy modelyuvannya: zb. nauk. prac' MDPU im. B. Khmel'nyc'kogo, Vol. 25, pp. 226–233, 2023. DOI: 10.33842/2313-125X-2023-25
- GOST 21354-87. Peredachi zubchatye cilindricheskie jevol'ventnye vneshnego zaceplenija. Raschet na prochnost'", Standarts Publ., Moscow, USSR, 1989.
- ISO 6336-1:2019. Calculation of load capacity of spur and helical gears–Part 1: Basic principles, introduction and general influence factors", 2019.
- Bolotovskij, I. A., Gur'ev, B. I., Smirnov, V. Je., Shenderej, B. I. "Cilindricheskie evol'ventnye zubchatye peredachi vneshnego zaceplenija. Raschet geometrii: Spravochnoe posobie", Mashinostroenie Publ., Moscow, USSR, 1974.
- Rekleytys, H., Reyvyndran, A., Rjehsdel, K. "Engineering Optimization", A Wiley-Interscience Publ., New York, USA, 1983.
- Cézová E. "Economical and Statistical Optimization of the Maintenance in the Production rocess", Manufacturing Technology 23 (1), 2023. ISSN 2787–9402
- Sobol', I. M., Statnikov, R. B. "Vybor optimal'nyh parametrov v zadachah so mnogimi kriterijami", 2th ed., Drofa Publ., Moscow, Russia, 2006. ISBN 5-7107-7989-Х
- Ustynenko, O., Bondarenko, O., Klochkov, I, Protasov, R., Bošanský, M., Andrienko, S. "Mathematical Model and Optimization Algorithm by Mass of Tracked Load-Carrier/Prime Mover MT-LB Transmission", Strojnícky časopis–Journal of Mechanical Engineering 72 (1), рp. 125–134, 2022. DOI: 10.2478/scjme-2022-0012
- Brumercik, F., T Gajdošík T., Čuchor, M. "Measurement and Evaluation of the Test Bench with an Open Flow of Mechanical Power for Gearboxes Testing". Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020), 2023 DOI: 10.2991/978-94-6463-182-1_38
Language: English
Page range: 163 - 172
Published on: Apr 30, 2025
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Related subjects:
© 2025 Oleksandr Ustynenko, Stanislav Cherelev, Juraj Ondruška, Roman Protasov, Vitalii Yepifanov, Oleksiy Bondarenko, Sergij Andrienko, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.