Simulation of the Workspace and Manipulability of An Industrial Robot For Research in Robotic Milling Needs
References
- Chen, X. L. G., Li, Y. "Physiscs-informed bayesian inference for milling stability analysis", Elsevier, International Journal of Machine Tools and Manufacture 167, 2021. DOI: 10.1016/j.ijmachtools.2021.103767
- Bodzás, S. "Manufacturing Analysis of Face Milling Technology by Tool Setting Using the Same Initial Parameters", Strojnícky časopis–Journal of Mechanical Engineering 73 (1), pp. 13–24, 2023. DOI: 10.2478/scjme-2023-0002
- Hajdu, W. M. D., Borgioli, F. "Robust stability of milling operations based on pseudospectral approach", Elsevier, International Journal of Machine Tools and Manufacture 149, 2020. DOI: 10.1016/j.ijmachtools.2019.103516
- Burghardt, A., Szybicki, D., Gierlak, P. "Tcp parameters monitoring of robotic stations", Electronics 11 (20), 3415, 2022. DOI: 10.3390/electronics11203415
- Schrek, G., Surdilovic, D., Krüger, J. "Hephestos: hard material small-batch industrial machining robot", In Conference ISR Robotik, 41st International Symposium on Robotics, Munich, Germany, June 2014.
- Neto, P., Moreira, A. P. "Robotics in smart manufacturing", Springer, Communications in Computer and Information Science 371:1_225, 2013. DOI: 10.1007/978-3-642-39223-8
- Iglesias, I., Sebastián, M.A., Ares, J.E. "Overview of the state of robotic machining: Current situation and future potential", Elsevier, The Manufacturing Engineering Society International Conference, MESIC, 132:911_917, 2015. DOI: 10.1016/j.proeng. 2015.12.577
- Do Duc., T. "Application of EDAS, MARCOS, TOPSIS, MOORA and PIV Methods for Multi-Criteria Decision Making in Milling Process", Strojnícky časopis–Journal of Mechanical Engineering 71 (2), pp. 69–84, 2021. DOI: 10.2478/scjme-2021-0019
- Jazar, R. N. "Theory of applied robotics: kinematics, dynamics, and control", 2nd ed. Springer, New York, 2010. ISBN 978-1-4419-1749-2
- Zerun, Z., Xiaowei, T., Chen, C., Fangyu, P., Rong, Y., Lin, Z., Zepeng, L., Jiawei, W. "High precision and efficiency robotic milling of complex parts: challenges, approaches and trends", Chin J Aeronaut 35, pp. 22–46, 2022. DOI:10.1016/j.cja.2020.12.030
- Xue, Y., Sun, Z., Liu, S., Gao, D., Xu, Z. "Stiffness-Oriented Placement Optimization of Machining Robots for Large Component Flexible Manufacturing System", Machines 10, pp. 389–405, 2022. DOI: 10.3390/ machines10050389
- Stejskal, T., Svetlík, J., Ondočko, Š. "Mapping Robot Singularities through the Monte Carlo Method", Appl. Sci. 12, pp. 8330–8345, 2022. DOI: 10.3390/ app12168330
- Elsamanty, M., Faidallah, E.M., Hossameldin, Y.H., Rabbo, S.A., Maged, S.A., Yang, H., Guo, K. "Workspace Analysis and Path Planning of a Novel Robot Configuration with 9-DOF Serial-Parallel Hybrid Manipulator (SPHM) ", Appl. Sci. 13, pp. 2088–2010, 2023. DOI: 10.3390/app13042088
- Zelechowski, M., Faludi, B., Karnam, M., Gerig, N. "Automatic patient positioning based on robot rotational workspace for extended reality", International Journal of Computer Assisted Radiology and Surgery 18, pp. 1951–1959, 2023. DOI: 10.1007/s11548-023-02967-2
- ABB Robot IRB1100 datasheet
- Hunter, J. D. "Matplotlib: A 2D graphics environment", Computing in Science & Engineering 9 (3), pp. 90–95, 2007. DOI: 10.1109/MCSE.2007.5
- Sullivan, C. B., Kaszynski, A. "3D plotting and mesh analysis through a streamlined interface for the Visualization Toolkit", Journal of Open Source Software 4 (37), pp. 1450, 2019. DOI: 10.21105/joss.01450
- Palčák, F. "Mechanika výrobnej techniky PRaM", SVŠT in Bratislava, Bratislava, 1988. (in Slovak)
- Robot operation system: Documentation [https://wiki.ros.org]
- Jin, Y., Gu, Q., Liu, S., Yang, C. "Experimental investigation and modelling of force induced surface errors for the robot-assisted milling process", Machines 11(6), 655, 2023. DOI: 10.3390/machines11060655
- Zhang, Y., Zhou, T., Hu, T., Qiao, J. "Stability analysis of milling chatter in six degree-of-freedom industrial robots", The International Journal of Advanced Manufacturing Technology, pp.1–20, 2023. DOI: 10.1007/s00170-023-11615-7
- Hanko, L., Chlebo, O., Križan, P., Kijovský, J., Svátek, M. "Stanovenie okrajových podmienok pre výskum robotického obrábania", In Vývoj výrobných systémov a technológií, Bratislava, November 2023. (in Slovak)
- Wang, L., Liu, Y., Yu, Y., Zhang, J., Shu, B. "Optimization of redundant degree of freedom in robotic milling considering chatter stability", The International Journal of Advanced Manufacturing Technology 121, pp. 8379–8394, 2022. DOI: 10.1007/s00170-022-09889-4
- Li, J., Li, B., Shen, N., Qian, H., Guo, Z. "Effect of the cutter path and the work piece clamping position on the stability of the robotic milling system". The International Journal of Advanced Manufacturing Technology 89, pp. 2919–2933, 2017. DOI: 10.1007/s00170-016-9759-x
Language: English
Page range: 49 - 60
Published on: Apr 30, 2025
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Related subjects:
© 2025 Ján Kijovský, Peter Križan, Lukáš Hanko, Michal Svátek, Jozef Bábics, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.