References
- Zhang, Z., Wang, B., Hui, D., Qiu, J., Wang, S."3D bioprinting of soft materials-based regenerative vascular structures and tissues", Composites Part B: Engineering 123, pp. 279–291, 2017. DOI: 10.1016/j.compositesb.2017.05.011
- Wang, X., Jiang, M., Zhou, Z., Gou, J., Hui, D. "3D printing of polymer matrix composites: A review and prospective", Composites Part B: Engineering 110, pp. 442–458, 2017. DOI: 10.1016/j.compositesb.2016.11.034
- Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., Hui, D. "Additive manufacturing (3D printing): A review of materials, methods, applications and challenges", Composites Part B: Engineering 143, pp. 172–196, 2018. DOI: 10.1016/j.compositesb.2018.02.012
- Parandoush, P., Lin, D. "A review on additive manufacturing of polymer-fiber composites", Composite Structures 182, pp. 36–53, 2017. DOI: 10.1016/j.compstruct.2017.08.088
- Majko, J., Handrik, M., Vaško, M., Sága, M. "Influence of Fiber Deposition and Orientation on Stress Distribution in Specimens Produced Using 3D Printing", Strojnícky časopis–Journal of Mechanical Engineering 69 (3), pp. 81–88, 2019. DOI: 10.2478/scjme-2019-0033
- Sejč, P., Jaroš, J., Vanko, B. "Use of Laser Metal Deposition Technology in Additive Manufacturing of Ni Powder Materials", Strojnícky časopis - Journal of Mechanical Engineering 72 (2), pp. 161–172, 2022. DOI: 10.2478/scjme-2022-0026
- Handrik, M., Vaško, M., Majko, J., Sága, M., Dorčiak, F. "Influence of the Shape of the Test Specimen Produced by 3D Printing on the Stress Distribution in the Matrix and in Long Reinforcing Fibers", Strojnícky časopis - Journal of Mechanical Engineering 69 (3), pp. 61 - 68, 2019. DOI: 10.2478/scjme-2019-0030
- Kumar, L. J., Krishnadas Nair, C. G. "Current Trends of Additive Manufacturing in the Aerospace Industry", in Advances in 3D Printing & Additive Manufacturing Technologies, D. I. Wimpenny, P. M. Pandey, and L. J. Kumar, Eds., ed Singapore: Springer Singapore, pp. 39–54, 2017.
- Stepashkin, А. А., Chukov, D. I., Senatov, F. S., Salimon, A. I., Korsunsky, A. M., Kaloshkin, S. D. "3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties", Composites Science and Technology 164, pp. 319–326, 2018. DOI: 10.1016/j.compscitech.2018.05.032
- Pyl, L., Kalteremidou, K.-A., Van Hemelrijck, D. "Exploration of the design freedom of 3D printed continuous fibre-reinforced polymers in open-hole tensile strength tests," Composites Science and Technology 171, pp. 135–151, 2019. DOI: 10.1016/j.compscitech.2018.12.021
- Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., et al. "Highly oriented carbon fiber–polymer composites via additive manufacturing", Composites Science and Technology 105, pp. 144–150, 2014. DOI: 10.1016/j.compscitech.2014.10.009
- Berman, B. "3-D printing: The new industrial revolution", Business Horizons 55, pp. 155–162, 2012. DOI: 10.1016/j.bushor.2011.11.003
- Wolfs, R. J. M., Bos, F. P., Salet, T. A. M. "Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing", Cement and Concrete Research 106, pp. 103–116, 2018. DOI: 10.1016/j.cemconres.2018.02.001
- Panda, B., Lim, J. H., Tan, M. J. "Mechanical properties and deformation behaviour of early age concrete in the context of digital construction", Composites Part B: Engineering 165, pp. 563–571, 2019. DOI: 10.1016/j.compositesb.2019.02.040
- Mohanavel, V., Priyadharshan. R, Ravichandran, M, Sivanraju, R., Velmurugan, P., Subbiah, R. "The Role and Application of 3D Printer in the Automobile Industry", ECS Transactions 107, p. 12001, 2022. DOI: 10.1149/10701.12001ecst
- Do, A.-V., Khorsand, B., Geary, S. M., Salem, A. K. "3D Printing of Scaffolds for Tissue Regeneration Applications", Advanced Healthcare Materials 4, pp. 1742–1762, 2015. DOI: 10.1002/adhm.201500168
- Wang, M. O., Vorwald, C. E., Dreher, M. L., Mott, E. J., Cheng, M.-H., Cinar, A. et al. "Evaluating 3D-Printed Biomaterials as Scaffolds for Vascularized Bone Tissue Engineering", Advanced Materials 27, pp. 138–144, 2015. DOI: 10.1002/adma.201403943
- Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., Fischer, H. "Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity", Advanced Healthcare Materials 5, pp. 326–333, 2016. DOI: 10.1002/adhm.201500677
- Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., Chen, S. "3D printing of functional biomaterials for tissue engineering", Current Opinion in Biotechnology 40, pp. 103–112, 2016. DOI: 10.1016/j.copbio.2016.03.014
- Lipton, J. I., Cutler, M., Nigl, F., Cohen, D. Lipson, H. "Additive manufacturing for the food industry", Trends in Food Science & Technology 43, pp. 114–123, 2015. DOI: 10.1016/j.tifs.2015.02.004
- Sun, J., Zhou, W., Huang, D., Fuh, J. Y. H., Hong, G. S. "An Overview of 3D Printing Technologies for Food Fabrication", Food and Bioprocess Technology 8, pp. 1605–1615, 2015. DOI: 10.1007/s11947-015-1528-6
- Godoi, F. C., Prakash, S., Bhandari, B. R. "3d printing technologies applied for food design: Status and prospects", Journal of Food Engineering 179, pp. 44–54, 2016. 10.1016/j.jfoodeng.2016.01.025
- Wang, B. Z., Chen, Y. "The Effect of 3D Printing Technology on the Future Fashion Design and Manufacturing", Applied Mechanics and Materials 496–500, pp. 2687–2691, 2014. DOI: 10.4028/www.scientific.net/AMM.496-500.2687
- Dimić, A., Mišković, Ž., Mitrović, R., Ristivojević, M., Stamenić, Z., Danko, J. et al., "The Influence of Material on the Operational Characteristics of Spur Gears Manufactured by the 3D Printing Technology", Strojnícky časopis–Journal of Mechanical Engineering 68 (3), pp. 261–270, 2018. DOI: 10.2478/scjme-2018-0039
- Kiendl, J., Gao, C. "Controlling toughness and strength of FDM 3D-printed PLA components through the raster layup", Composites Part B: Engineering 180, p. 107562, 2020. DOI: 10.1016/j.compositesb.2019.107562
- Yao, T., Ye, J., Deng, Z., Zhang, K., Ma, Y., Ouyang, H. "Tensile failure strength and separation angle of FDM 3D printing PLA material: Experimental and theoretical analyses", Composites Part B: Engineering 188, p. 107894, 2020. DOI: 10.1016/j.compositesb.2020.107894
- Hsueh, M.-H., Lai, C.-J., Wang, S.-H., Zeng, Y.-S., Hsieh, C.-H., Pan, C.-Y. et al. (Effect of Printing Parameters on the Thermal and Mechanical Properties of 3D-Printed PLA and PETG, Using Fused Deposition Modeling. Polymers 13(11), 2021. Available at: https://mdpi-res.com/d_attachment/polymers/polymers-13-01758/article_deploy/polymers-13-01758.pdf?version=1622113824
- "Kingroon", https://kingroon.com/collections/petg-filament (lasted access 14 Aug 2024)
- "Anycubic", https://store.anycubic.com/products/anycubic-i3-mega-s (lasted access 14 Aug 2024)
- "A International, Standard test method for tensile properties of plastics: ASTM international", 2014.
- Dean, A., Voss, D. "Design and analysis of experiments", Springer, 1999.