References
- Ramadan, M., Ahmet, S. “The mathematical analysis of demands for railway passenger transport in Kosovo”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 189 – 198, 2021. DOI: 10.2478/scjme-2021-0029
- Žiaran, S., Chlebo, O., Šooš, Ľ. “Methodology of prognostic vibro-acoustic analysis of buildings from potential dynamic loads generated by rail vehicles”, Strojnícky časopis – Journal of Mechanical Engineering 73 (1), pp. 197 – 208, 2023. DOI: 10.2478/scjme-2023-0016
- Li, W., Wang, H. Y., Wen, Z. F., Du, X., Wu, L., Li, X., Jin, X. S. “An investigation into the mechanism of metro rail corrugation using experimental and theoretical methods”, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 230 (4), pp. 1025 – 1039, 2016. DOI: 10.1177/0954409715596182
- Fang, G., Wang, Y. R., Peng, Z. K., Wu, T. X. “Theoretical investigation into the formation mechanism and mitigation measures of short pitch rail corrugation in resilient tracks of metros”, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 232 (9), pp. 2260 – 2271, 2018. DOI: 10.1177/0954409718769750
- Park, J., Ahn, A., Kim, J., Koh, Hyo-In., Park, J. “Direct determination of dynamic properties of railway tracks for flexural vibrations”, European Journal of Mechanics-A/Solids 61, pp. 14 – 21, 2017. DOI: 10.1016/j.euromechsol.2016.08.010
- Zhou, Z. J., Li, W., Wen, Z. F., Xiao, G. F. “Cause analysis of metro short-wavelength rail corrugation based on dynamic characteristics of wheel-rail surface”, Journal of Vibration, Measurement and Diagnosis 40 (6), pp. 1040 – 1047, 2020. DOI: 10.16450/j.cnki.issn.1004-6801.2020.06.002
- Balekwa, B. M., Kallon, D. V. V. “Correlation of short pitch rail corrugation with railway wheel-track resonance at low frequencies of excitation”, Vibration 3 (4), pp. 491 – 520, 2020. DOI: 10.3390/vibration3040031
- Pan, B., Wang, A. B., Gao, X. G., Liu, L. “Effect of lateral dynamic response characteristics of wheel-rail coupling systems on rail corrugation”, Noise and Vibration Control 40 (1), pp. 132 – 137, 2020. DOI: 10.3969/j.issn.1006-1355.2020.01.025
- Fourie, D., Fröhling, R., Heyns, S. “Railhead corrugation resulting from mode-coupling instability in the presence of veering modes”, Tribology International 152, 106499, 2020. DOI: 10.1016/j.triboint.2020.106499
- Beshbichi, O. El., Wan, C., Bruni, S., Kassa, E. “Complex eigenvalue analysis and parameters analysis to investigate the formation of railhead corrugation in sharp curves”, Wear 450 – 451, 203150, 2020. DOI: 10.1016/j.wear.2019.203150
- Chen, G. X., Zhou, Z. R., Ouyang, H., Jin, X. S., Zhu, M. H., Liu, Q. Y. “A finite element study on rail corrugation based on saturated creep force-induced self-excited vibration of a wheelset–track system”, Journal of Sound and Vibration 329 (22), pp. 4643 – 4655, 2010. DOI: 10.1016/j.jsv.2010.05.011
- Chen, G. X., Qian, W. J., Mo, J. L., Zhu, M. H. “A transient dynamics study on wear-type rail corrugation on a tight curve due to the friction-induced self-excited vibration of a wheelset-track system”, Journal of Mechanical Engineering 50 (9), pp. 71 – 76, 2014. DOI: 10.3901/JME.2014.09.071
- Yao, H. M., Shen, G., Gao, L. J. “Formation mechanism of worn profile rail corrugation based on experimental verification”, Journal of Tongji University (Natural Science) 46 (10), pp. 1427 – 1432, 2018. DOI: 10.11908/j.issn.0253-374x.2018.10.015
- Sun, Y. Q., Simson, S. “Wagon-track modelling and parametric study on rail corrugation initiation due to wheel stick-slip process on curved track”, Wear 265 (9 – 10), pp. 1193 – 1201, 2008. DOI: 10.1016/j.wear.2008.02.043
- Matsumoto, A., Sato, Y., Ono, H., Tanimoto, M., Oka, Y., Miyauchi, E. “Formation mechanism and countermeasures of rail corrugation on curved track”, Wear 253 (1 – 2), pp. 178 – 184, 2002. DOI: 10.1016/S0043-1648(02)00097-2
- Daniel, W. J. T., Horwood, R. J., Meehan, P. A., Wheatley, N. “Analysis of rail corrugation in cornering”, Wear 265 (9 – 10), pp. 1183-1192, 2008. DOI: 10.1016/j.wear.2008.02.030
- Wen, Z. F., Jin, X. S., Xiao, X. B., Zhou, Z. R. “Effect of a scratch on curved rail on initiation and evolution of plastic deformation induced rail corrugation”, International Journal of Solids and Structures 45 (7 – 8), pp. 2077 – 2096, 2008. DOI: 10.1016/j.ijsolstr.2007.11.013
- Jin, X. S., Wen, Z. F., Xiao, X. B. “Investigation into mechanism of initial rail corrugation formation at a curved track”, Journal of Mechanical Engineering 44 (3), pp. 1 – 8 +15, 2008. DOI: 10.3901/jme.2008.03.001
- Jin, X. S., Xiao, X. B., Wen, Z. F., Zhou, Z. R. “Effect of sleeper pitch on rail corrugation at a tangent track in vehicle hunting”, Wear 265 (9 – 10), pp. 1163 – 1175, 2008. DOI: 10.1016/j.wear.2008.01.028
- Jin, X. S., Wen, Z. F. “Effect of discrete track support by sleepers on rail corrugation at a curved track”, Journal of Sound and Vibration 315 (1 – 2), pp. 279 – 300, 2008. DOI: 10.1016/j.jsv.2008.01.057
- Xiong, J. Y., Jin, X. S. “Effects of lateral dent on curved rail on rail corrugation”, Engineering Mechanics 23 (6), pp. 135 – 141 +134, 2006. Available at: https://engineeringmechanics.cn/article/id/282
- Liu, X. G., Wang, P. “Investigation of the generation mechanism of rail corrugation based on friction induced torsional vibration”, Wear 468 – 469, pp. 203593, 2021. DOI: 10.1016/j.wear.2020.203593
- Cui, X. L., Chen, G. X., Zhao, J. W., Yan, W. Y., Ouyang, H. J., Zhu, M. H. “Field investigation and numerical study of the rail corrugation caused by frictional self-excited vibration”, Wear 376-377, pp. 1919 – 1929, 2017. DOI: 10.1016/j.wear.2017.01.089
- Cui, X. L., Huang, B., Du, Z. X., Yang, H. J., Jiang, G. “Study on the mechanism of the abnormal phenomenon of rail corrugation in the curve interval of a mountain city metro”, Tribology Transactions 63 (6), pp. 996 – 1007, 2020. DOI: 10.1080/10402004.2020.1782551
- Cuervo, P. A., Santa, J. F., Toro, A. “Correlations between wear mechanisms and rail grinding operations in a commercial railroad”, Tribology International 82, pp. 265 – 273, 2015. DOI: 10.1016/j.triboint.2014.06.025
- Liu, X. G., Xiao, C. B. “Investigation of the generation mechanism of squeal noise under nonnegative damping conditions”, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 235 (7), pp. 887 – 897, 2021. DOI: 10.1177/0954409720966467
- De Beer, F. G., Janssens, M. H. A., Kooijman, P. P. “Squeal noise of rail-bound vehicles influenced by lateral contact position”, Journal of Sound and Vibration 267 (3), pp. 497 – 507, 2003. DOI: 10.1016/S0022-460X(03)00710-7
- Popp, K., Schneider, E., Irretier, H. “Noise generation in railway wheels due to rail-wheel contact forces”, Vehicle System Dynamics 15, pp. 448 – 466, 1986. DOI: 10.1080/00423118508968829
- Shen, Z. Y., Hedrick, J. K., Elkins, J. A. “A comparison of alternative creep force models for rail vehicle dynamic analysis”, Vehicle System Dynamics 12 (1 – 3), pp. 79 – 83, 1983. DOI: 10.1080/00423118308968725
- Gorbunov, M., Kravchenko, K., Bureika, G., Gerlici, J., Nozhenko, O., Vaičiūnas, G., Bučinskas, V., Steišūnas, S. “Estimation of sand electrification influence on locomotive wheel/rail adhesion processes”, Eksploatacja i Niezawodnosc-Maintenance and Reliability 21 (3), pp. 460 – 467, 2019. DOI: 10.17531/ein.2019.3.12
- Shen, G., Zhang, X. H., Guo, M. H. “Theoretical study on rail corrugation on curved track of metro systems”, Journal of Tongji University (Natural Science) 39 (3), pp. 381 – 384, 2011. DOI: 10.3969/j.issn.0253-374x.2011.03.013
- Wang, Z. Q., Lei, Z. Y., Zhao, Y., Xu, Y. “Rail corrugation characteristics of cologne egg fastener section in small radius curve”, Shock and Vibration 1827053, 2020. DOI: 10.1155/2020/1827053