Fatigue Experimental of AS-CAST Ti-6Al-7Nb Implemented on Designed Femoral Stem for Indonesian People Through Finite Element Analysis
References
- Ferry F.R. “Indonesia’s healthcare landscape: embracing innovation in the new health regime”, Current Medical Research & Opinion 40 (6), pp. 1 – 8, 2024. DOI: 10.1080/03007995.2024.2349732
- Department of Economic and Social Affairs, “Population and vital statistics report”, United Nations, New York, United State, Series A, Vol. LXXIII, 2021.
- Bajpai, A.K., Bajpai, J., Saini, R.K., Agrawal, P., Tiwari A. “Smart biomaterials devices, polymers in biomedical sciences”, Taylor & Francis Group: CRC Press, pp. 1 – 2, 2016. 978-ISBN: 1-4987-0698-8
- Varacallo, M., Herzog, L., Toossi, N., Johanson, N. “Ten-year trends and independent risk factors for unplanned readmission following elective total joint arthroplasty at a large urban academic hospital”, The Journal of Arthroplasty 32, (6), pp. 1739 – 1746, 2016. DOI: 10.1016/j.arth.2016.12.035
- Niinomi, M. “Mechanical biocompatibilities of titanium alloys for biomedical application”, Journal of the Mechanical Behaviour of Biomedical Materials 1 (1), pp. 30 – 42, 2008. DOI: 10.1016/j.jmbbm.2007.07.001
- Murr, L. E., et al. “Microstructure and mechanical behaviour of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications”, Journal of the Mechanical Behaviour of Biomedical Materials 2 (1), pp. 20 – 32, 2009. DOI: 10.1016/j.jmbbm.2008.05.004
- Skublova, L., Skorik, V., Mrazikova, R., Hadzima, B. “Corrosion resistance of Ti-6Al-4V titanium alloy with modified surfaces”, Komunikacie 12, pp. 80 - 84, 2010. DOI: 10.26552/com.C.2010.4.80-84
- Gallego, et al. “Microstructural characterization of Ti-6Al-7Nb alloy severe plastic deformation”, Materials Research 5, pp. 786 – 791, 2012. DOI: 10.1590/S1516-14392012005000100
- Okazaki, Y., Mori, J. “Mechanical performance of artificial hip stems manufactured by hot forging and selective laser melting using biocompatible Ti-15Zr-4Nb alloy”, Materials MDPI 14, (4), pp. 732, 2021. DOI: 10.3390/ma14040732
- Fellah, M., Assala, O., Labaïz, M., Dekhil, L., Iost, A. “Friction and wear behaviour of Ti-6Al-7Nb biomaterial alloy”, Journal of Biomaterials and Nanobiotechnology 4 (1), pp. 374 – 384, 2013. DOI: 10.4236/jbnb.2013.44047
- Lin, C.W., Ju, C.P., Chern Lin, J.H. “Comparison among mechanical properties of investment-cast c.p. Ti, Ti-6Al-7Nb and Ti-15Mo-1Bi alloys”, Materials Transactions 45, (10), pp. 3028 – 3032, 2004. DOI: 10.2320/matertrans.45.3028
- Koizumi, H., Ishii, T., Okazaki, T., Kaketani, M. “Castability and mechanical properties of Ti-15Mo-5Zr-3Al alloy in dental casting”, Journal of Oral Science 60 (2), pp. 285 – 292, 2018. DOI: 10.2334/josnusd.17-0280
- García-González, M. et al. “Optimized planning and evaluation of dental implant fatigue testing: a specific software application”, Biology (Basel) 9 (11), pp. 372, 2020. DOI: 10.3390/biology9110372
- Castillo, E. et al. “Specimen length effect on parameter estimation in modelling fatigue strenght by Weibull distribution”, International Journal of Fatigue 28 (9), pp. 1047 – 1058, 2006. DOI: 10.1016/j.ijfatigue.2005.11.006
- Fernández-Canteli, A., Przybilla, C., Nogal, M., López Aenlle, M., Castillo, E. “ProFatigue: a software program for probabilistic assessment of experimental fatigue data sets”, Procedia Engineering, XVII International Colloquim on Mechanical Fatigue of Metals (ICMFM17) 74, pp. 236 – 241, 2014. DOI: 10.1016/j.proeng.2014.06.255
- Castillo, E., Fernández-Canteli, A.”A unified statistical methodology for modelling fatigue damage”, 1st ed. Dordrecht Springer Netherlands, 2009. ISBN: 978-1-4020-9181-0, DOI: 10.1007/978-1-4020-9182-7
- da Silva, L.F.R.C. “Monotonic and fatigue behaviour of double shear bolted joints: experimental and numerical studies”, Master, Department of Engineering. University of Porto, 2020.
- Muniz-Calvente, M., de Jesus, A.M.P, Correia, J.A.F.O., Fernández-Canteli, A. “A methodology for probabilistic prediction of fatigue crack initiation taking into account the scale effect”, Engineering Fracture Mechanics 185, pp. 101 – 113, 2017. DOI: 10.1016/j.engfracmech.2017.04.014
- Castillo, E., Muniz-Calvente, M., Fernández-Canteli, A., Blasón, S. “Fatigue assessment strategy using bayesian techniques”, Materials 12, (9), pp. 3239, 2019. DOI: 10.3390/ma12193239
- Bonfante, E. A., Coelho, P. G. “A critical perspective on mechanical testing of implants and prostheses”, Advance in Dental Research 28 (1), pp. 18 – 27, 2016. DOI: 10.1177.0022034515624445
- DePuy Synthes, “CORAIL hip system catalogue”, Johnson & Johnson, France, 2016.
- Safitri, P.N., et al. “Stem geometry recommendation for total hip replacement planning using computed tomography data analysis”, Journal of Biomimetics, Biomaterials and Biomedical Engineering 55, pp. 23 – 34, 2022. DOI: 10.4028/p-kz8jrp
- Qurashi, S., et al. “Stand up! Are normal weight-bearing forces sufficient for a 12/14 Morse taper locking in total hip arthroplasty? “, Hip International 32, (2), pp. 231 – 236, 2022. DOI: 10.1177/1120700020967000
- International Standard, “Determination of endurance properties and performance of stemmed femoral components”, Switzerland, ISO 7206-4, 3rd ed, 2010.
- Zafer Senalp, A., Kayabasi, O., Kurtaran, H. “Static, dynamic and fatigue behaviour of newly designed stem shapes for hip prosthesis using finite element analysis”, Material & Design 28 (5), pp. 1577 – 1583, 2007. DOI: 10.1016/j.matdes.2006.02.015
- Lagoda, A., Nieslony, A. “Stress Analysis of Dental Implant Inserted in the Mandible”, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 25 – 32, 2018. DOI: 10.2478/scjme-2018-0003
- Mahmoud, A., Wakabayashi, N., Takahashi, H., Ohyama, T. “Deflection fatigue of Ti-6Al-7Nb, Co-Cr, and gold alloy cast clasps”, The Journal of Prosthetic Densitry 93 (2), pp. 183 – 188, 2005. DOI: 10.1016/j.prosdent.2004.11.011
- Bousnane, T., Benbarek, S., Sahli, A., Serier, B., Bouiadjra, B.A.B. “Damage of the bone-cement interface in finite element analyses of cemented orhopaedic implants”, Periodica Polytechnica, Mechanical Engineering 62 (2), pp. 173 – 178, 2018. DOI: 10.3311/PPme.11851
- Babić, M., Verić, O., Božić, Ž., Sušić, A. “Finite element modelling and fatigue life assessment of a cemented total hip prosthesis based on 3D scanning”, Engineering Failure Analysis 113, 104536, 2020. DOI: 10.1016/j.engfailanal.2020.104536
- Jonathan, R.T.J., Browne, M., Lennon, A.B., Patrick, J.P., Taylor, M. “Cement mantle fatigue failure in total hip replacement: experimental and computational testing”, Journal of Biomechanics 40 (7), pp. 1525 – 1533, 2006. DOI: 10.1016/j.jbiomech.2006.07.029
- Šćepanović, M., et al. “Finite element analysis in defining the optimal shape and safety factor of retentive clasp arms of a removable partial denture”, Vojnosanitetski pregled, Military-medical and pharmaceutical review 70 (11), pp. 999 – 1005, 2013. DOI: 10.2298/VSP110526021S
- Heidi-Lynn, P., Bürgi, M., Wyss, Urs P. “Hip stem fatigue test prediction”, International Journal of Fatigue 31 (5), pp. 894 – 905, 2009. DOI: 10.1016/j.ijfatigue.2008.10.005
- Browell, R. “Calculating and displaying fatigue results on ANSYS”, Development Engineer, ANSYS Inc, 2006.
- Joshi, T., Sharma, R., Mittal, V.K., Gupta, V., Krishan, G. “Dynamic fatigue behaviour of hip joints under patient specific loadings”, International Journal of Automotive and Mechanical Engineering 19 (3), pp. 10014 – 10027, 2022. DOI: 0.15292/ijame.19.3. 2022.13.0773
- Taylor, L., and ASM international Handbook committee, “Metallography Structures and Phase Diagrams”, Metals Handbook 8th ed. American Society for Metals, 1973.
- Doi, H., Yoneyama, T., Kobayashi, E., Hanawa, T. “Fatigue property of Ti-5Al-13Ta Alloy Dental Castings in 0,9% NaCl Solution”, Material Transactions 47 (9), pp. 2444 – 2447, 2006. DOI: 10.2320/matertrans.47.2444
- Polyakova, V.V., Anumalasetty, V.N., Semenova, I.P., Valiev, R.Z. “Influence of UFG structure formation on mechanical and fatigue properties in Ti-6Al-7Nb alloy”, In: IOP Conference series, Material Science and Engineering 6th International, France, pp 24, 2014. DOI: 10.1088/1757-899X/63/1/012162.
- Nishijima, S. “Statistical analysis of fatigue test data”, Journal of the Society Material Science Japan 29 (316), pp. 24 – 29, 1980. DOI: 10.2472/jsms.29.24
- Kasuga, J., Yoneyama, T., Kobayashi, E., Hanawa, T., Doi, H. “Fatigue property of super-elastic Ti-Ni alloy dental casting”, Materials Transactions 46 (7), pp. 1555 – 1563, 2005. DOI: 10.2320/matertrans.46.1555
- Stanislav, S., Miarka, P., Sergio, B., Fernández-Canteli, A. “Evaluation of fatigue properties of S355 J2 and S355 J0 by using ProFatigue software”, Mechanical Fatigue of Metals, Springer Nature Switzerland, pp. 213 – 219, 2019. DOI: 10.1007/978-3-030-13980-3_28
- Giza, S., dos Santos, S.V., Ueki, M.M., Bertoni, F., Strohaecker, T.R. “Case study and analysis of fatigue failure in a THA stem”, Engineering Failure Analysis 28, pp. 166 – 175, 2013. DOI: 10.1016/j.engfailanal.2012.10.011
- Giza, S., et al. “Design aspects involved in a cemented THA stem failure case”, Engineering Failure Analysis, 16 (1), pp. 512 – 520, 2009. DOI: 10.1016/j.engfailanal.2008.06.016
- Guzmán, M.et al. “Finite element assessment of a hybrid proposal for hip Stem, from a standardized base and different activities”, Applied Sciences 12 (16), pp. 7963, 2022. DOI: 10.3390/app12167963
- Hernandez-Rodriguez, M.A.L., Ortega-Saenz, J.A., Contreras-Hernandez, G.R. “Failure analysis of a total hip prosthesis implanted in active patient”, Journal of the Mechanical Behaviour of Biomedical Materials 3, (8), pp. 619 – 622, 2010. DOI: 10.1016/j.jmbbm.2010.06.004
- Mierzejewska, Ż., Oksiuta, Z. “Failure analysis of a femoral hip stem made of stainless steel after a short time of exposure”, Acta Mechanica et Automatica 8 (3), pp. 146 – 150, 2014. DOI: 10.2478/ama-2014-0026
- Gedeon, M. “Mean stress and alternating stress”, Technical TIDBITS Materion Brush Inc, 1, (63), 2014. Available at: https://materion.de.com/-/media/files/alloy/newsletters/technical-tidbits/issue-no-63---mean-stress-and-alternating-stress.pdf [Accessed: 18 November 2022]
- Sutiyoko, S., Mahardika, M., Syamsudin, A. “Prediction of shrinkage porosity in femoral stem of titanium investment casting”, Archives of Foundry Engineering. 16 (4), pp. 157 – 162, 2016. DOI:10.1515/afe-2016-0102
- Leopold, G., Nadot, Y., Billaudeau, T., Mendez, J. “Influence of artificial and casting defects on fatigue strength of moulded components in Ti-6Al-4V alloy”, Fatigue & Fracture of Engineering Material & Structure 38 (9), pp. 1026 – 1041, 2015. DOI: 10.1111/ffe.12326
- Al Zoubi, N.F., Tarlochan, F., Mehboob, H. “Mechanical and fatigue behaviour of cellular structure Ti-6Al-4V alloy femoral stems: A finite element analysis”, Applied Sciences 12 (9), pp. 4197, 2022. DOI: 10.3390/app12094197
- Delikanli, Y.E., Kayacan, M.C. “Design, manufacture and fatigue analysis of lightweight hip implants”, Journal of Applied Biomaterials & Functional Materials 17 (2), 2019. DOI: 10.1177/228080019836830
- Taraka, H., Pardeep, P., Pankaj, B., Anilkumar, D., Indira, B., Aadarsh, K. “Friction stir welding tool life assessment through fatigue analysis”, Strojnícky časopis – Journal of Mechanical Engineering 73 (2), pp. 163 – 180, 2023. DOI: 10.2478/scjme-2023-0031
Language: English
Page range: 105 - 120
Published on: Nov 28, 2024
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Related subjects:
© 2024 Taqwatomo Galih, Ulma Saudi Aghni, Damisih, Suhendra Nandang, Wibisono Mirza, Wahyu Alam Giri, Jujur I Nyoman, Rianti Winda, Amalina Azahra Siti, Dikdik Gumelar Muhammad, Adi Saputra Dita, Husin Saddam, Fidyaningsih Riastuti, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.