References
- Ulaş Çaydaş, A. H. “Use of the grey relational analysis to determine optimum laser cutting parameters with multi-performance characteristics”, Optics & Laser Technology, pp. 978 – 994, 2008. DOI: 10.1016/j.optlastec.2008.01.004
- Amaral, I., Silva, F.J.G., Pinto, G.F.L., Campilho, R.D.S.G., Gouveia, R.M. “Improving the Cut Surface Quality by Optimizing Parameters in the Fibre Laser Cutting Process”, Procedia Manufacturing 38, pp. 1111 – 1120, 2019. ISSN 2351-9789
- Ding, H., Wang, Z., Guo, Y. “Multi-objective optimization of fiber laser cutting based on generalized regression neural network and non-dominated sorting genetic algorithm”, Infrared Physics & Technology 108, 2020. DOI: 10.1016/j.infrared.2020.103337
- Anghel, C., Gupta, K., Jen, T.C. “Analysis and optimization of surface quality of stainless steel miniature gears manufactured by CO2 laser cutting”, Optik 203, 2020. DOI: 10.1016/j.ijleo.2019.164049
- Dhrupal, J. K., Jaydeep, M. K., Anjal, R. P., Chirag, G. D., Pandya, D. H. “Parametric analysis of process parameter for Laser cutting process on SS-304”, Materials Today: Proceedings 5 (2), Part 1, pp. 5384 – 5390, 2018. DOI: 10.1016/j.matpr.2017.12.124
- Yaka, H. “Multiple Optimization of Cutting Parameters Affecting Kerf Formation and Surface Roughness in Laser Cutting of Al 5052 Alloy”, El-Cezeri 9 (1), pp. 220 – 231, 2022. DOI: 10.31202/ecjse.958728
- Vora, J., Chaudhari, R., Patel, C., Pimenov, D.Y., Patel, V.K., Giasin, K., Sharma, S. “Experimental Investigations and Pareto Optimization of Fiber Laser Cutting Process of Ti6Al4V”, Metals 11, p. 1461, 2021. DOI: 10.3390/met11091461
- Janković, P., Madić, M., Radovanović, M. et al. “Optimization of Surface Roughness from Different Aspects in High-Power CO2 Laser Cutting of AA5754 Aluminum Alloy”, Arab J Sci Eng 44, pp. 10245 – 10256, 2019. DOI: 10.1007/s13369-019-04037-9
- Rajaram, N., Sheikh-Ahmad, J., Cheraghi S.H, “CO2 laser cut quality of 4130 steel”, International Journal of Machine Tools and Manufacture 43 (4), pp. 351 – 358, 2003. DOI: 10.1016/S0890-6955(02)00270-5
- Edelstahl, B. “Matriálový list 1.0038”. [Online]. Available at: https://www.bogner.cz/files/lists/1-0038.pdf [Accessed day 1 November 2024]
- Keyence, “Digitálny merací systém 7500”. [Online]. Available at: https://www.keyence.eu/cscz/products/measure-sys/image-measure/im-7000/downloads/ [Accessed day 1 November 2024]
- Ryazantsev, A., Nechaev, V., Rebrova, S., Vorontsov, B., Bondarenko, O., Protasov, R. “Evaluation of the quality parameters of the surface layer of parts after machining with plasma heating”, Strojnícky časopis – Journal of Mechanical Engineering 74 (1), pp. 123 – 124, 2024. DOI: 10.2478/scjme-2024-0013
- Hrytsay, I., Stupnytskyy, V., Slipchuk, A. “Evaluation of the quality parameters of the surface layer of parts after machining with plasma heating”, Strojnícky časopis – Journal of Mechanical Engineering 73 (1), pp. 103 – 116, 2023. DOI: 10.2478/scjme-2023-0008