References
- Lloyd, D.J “The deformation of commercial Aluminum-Magnesium Alloys”, Metall. Mater. Trans. A 11, pp. 1287 – 1294, 1980.
- Polmear, I. J. “Light Alloys: From Traditional Alloys to Nanocrystals” (4th ed.), Butterworth-Heinemann/Elsevier, UK, 2006.
- Mandal, N. R. “Aluminum Welding” (2nd edition), Narosa Publishing Home Pvt. Ltd, Delhi, 2005.
- Belov, I. A., Alabin, A. I. “Advanced Aluminum Alloys with Zirconium and Scandium”, Tsvetn. Met. 2, pp. 99 – 106, 2007.
- Norman, A. F., Hyde, K., Costello, F., Thompson, S., Birley, S., Prangnell, P. B. “Examination of the effect of Sc on 2000 and 7000 series aluminium alloy castings: for improvements in fusion welding”, Materials Science and Engineering: A 354 (1–2), pp. 188 – 198, 2003.
- Mallipudi, S., Nallu, R. “Optimization of Process Parameters for FSW of Al-Mg-Mn-Sc-Zr Alloy Using CCD And RSM”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 195 – 224, 2018. DOI: 10.2478/scjme-2018-0035
- Cavaliere, P. “Friction stir welding of Al alloys: analysis of processing parameters affecting mechanical behavior”, Procedia CIRP 11, pp. 139 – 144, 2013.
- Taraka, H., Pardeep, P., Pankaj, B., Anilkumar, D., Indira, B., Aadarsh, K.. “Friction Stir Welding Tool Life Assessment Through Fatigue Analysis” Strojnícky časopis - Journal of Mechanical Engineering 73 (2), pp. 163 – 180, 2023. DOI: 10.2478/scjme-2023-0031
- Kim, G. G., Kim, D.Y., Hwang, I., Kim, D., Kim, Y.M., Park, J. “Mechanical Properties of Aluminum 5083 Alloy GMA Welds with Different Magnesium and Manganese Content of Filler Wires”, Applied Sciences 11(24), 11655, 2021.
- Sejč, P., Bučány, M., Zifčák, P. “Properties of FSW and MIG Welded Joints of AlSiMg Aluminium Alloy”, Strojnícky časopis – Journal of Mechanical Engineering 70 (2), pp. 141 – 152, 2020. DOI: 10.2478/scjme-2020-0027
- Mallipudi, S., Nallu, R. “Effect of Scandium and Zirconium Additions on Mechanical Properties of Al–Mg–Mn Alloy”, Transactions of the Indian Institute of Metals 72, pp. 227 – 238, 2019. DOI: 10.1007/s12666-018-1476-8
- Attallah, M. M., Davis, C. L. “Strangwood, M. Microstructure hardness relationships in friction stir welded AA5251”, Journal of Materials Science 42, pp. 7299 – 7306, 2007.
- Sato, Y. S., Park, S. H. C., Kokawa, H. “Microstructural factors governing hardness in friction-stir welds of solid–solution–hardened Al Alloys”, Metallurgical and Materials Transactions A 32, pp. 3033 – 3042, 2001.
- Ikeshita, S., Strodahs, A., Saghi, Z., Yamada, K., Burdet, P., Hata, S., Ikeda, K.-I., Midgley, P.A., Kaneko, K. “Hardness and microstructural variation of Al-Mg-Mn-Sc-Zr alloy”, Micron 82, pp. 1 – 8, 2016.
- He, Z., Peng, Y., Yin, Z., & Lei, X. “Comparison of FSW and TIG welded joints in Al-Mg-Mn-Sc-Zr alloy plates”, Transactions of the Nonferrous Metals Society of China 21, pp. 1685 – 1691, 2011.
- Mishra, R. S., Ma, Z. Y. “Friction stir welding and processing”, Materials Science and Engineering: R 50, pp. 1 – 78, 2005.
- Liu, Z.W., LI, L.X., YI, J., LI, S.K., Wang, Z.H., Wang, G. “Influence of heat treatment conditions on bending characteristics of 6063 aluminum alloy sheets”, Transactions of Nonferrous Metals Society of China 27, pp. 1498 – 1506, 2017.
- Mallipudi, S., Shankar, T., Srikar, P., Rao, U., Chandrasekhar, Y., Karthikeyan, K. “Effect of TIG and FSW Welding Processes on Mechanical Properties of Al-4.2Mg-0.6Mn-0.4Sc-0.1Zr Alloy”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 299 – 304, 2021. DOI: 10.2478/scjme-2021-0036