References
- Ryazantsev, A., Nechaev, V., Bondar, O. “Substantiation of the Parameters of the Process of Plasma Mechanical Milling of Titanium Alloys and Alloyed Steels”, Journal of Mechanical Engineering and Sciences (JMES) 14 (4), рр. 7520 – 7527, 2020. DOI: 10.15282/jmes.14.4.2020.18.0592
- López de Lacalle, L. N., Sánchez, J. A., Lamikiz, А., Celaya, А. “Plasma Assisted Milling of Heat-Resistant Superalloys”, Journal of Manufacturing Science and Engineering 126 (2), рр. 274 – 285, 2004. DOI: 10.1115/1.1644548
- Nechayev V. P., Ryazantsev, A. A. “Features of Thermal Processes During Machining Workpieces Using Plasma Heating,” Bulletin of the Kryvyi Rih Technical University. Scientific Proceedings 26, pp. 157 – 160, 2010.
- Shaterin, M. A., Korotkih, M. T., Nechaev, V. P. “Plasma-Assisted Face Milling,” Mashinostroitel 9, рр. 21 – 22, 1986.
- Lamikiz, A., Celaya, A. “Plasma Assisted Milling of Heat-Resistant Super-Alloys,” Journal of Manufacturing Science and Engineering 126, p. 274, 2004.
- Korotkih, M. T., Ushomirskaya, L. A. “Characteristics of Plasma Heating in Handling Cutting Hard Materials”, Metalloobrabotka 2 (68), рр. 23 – 27, 2012.
- Mrochek, J. A., Kozhuro, L. M., Kheifets, M. L. “Plasma-Assisted Machining of Materials”, Bulletin of the Gomel Sukhoi State Technical University 4 (26), pp. 44 – 47, 2006.
- Loladze, T. N., “Strength and Wear Resistance of the Cutting Tools”, Moscow: Mashinostroyeniye, 1982.
- Podurayev, V. N. “Automatically Controlled and Combined Cutting Processes”, Moscow: Mashinostroyeniye, 1977.
- Nechayev, V. P., Poznyakov, I. N. “Structural Transformations in the Layer Being Cut During Plasma-Assisted Machining,” Plazmotekhnologiya, pp. 35 – 37, 1991.
- Kunin, V. S. “Track Record of Implementing Plasma-Assisted Machining”, Leningrad: Leningrad House of Scientific and Technical Propaganda Publishers, 1982.
- Reznikov, A. N., Reznikov, L. A. “Energy Calculations for Cutting Material Using Plasma Heating,” Moscow: Energomashinostroyeniye 11, pp. 26 – 28, 1981.
- Chen, S. H., Tsai, K. T. “Predictive Analysis for the Thermal Diffusion of the Plasma-Assisted Machining of Superalloy Inconel-718 Based on Exponential Smoothing”, Advances in Materials Science and Engineering 2018, article no. ID 9532394, 9 pages, 2018. DOI: 10.1155/2018/9532394
- Wakasa, H. “Application of Plasma-Heated Cutting”, Oyo Kikai Kogau (Mechanical Engineering Application) 17 (3), pp. 54 – 59, 1976.
- Shaturov, G. F, Mrochek, J. A. “Progressive Surface Machining Processes”, Minsk: Tekhnoprint Unitary Enterprise, 2001.
- Bobrov, V. F., “Fundamentals of the theory of metal cutting”, Moscow: Mashinostroyeniye Publishing House, pp. 135 – 142, 1975.
- Reznikov, N. A., Shaterin, M. A., Kunin, V. S., Reznikov, L. A. “Metal Cutting With Plasma Heating”, Moscow: Mashinostroenie, 1986.
- Sun, S., Brandt, M., Dargusch, M. S. “Thermally Enhanced Machining of Hard-to-Machine Materials”, International Journal of Machine Tools and Manufacture 50 (8), рр. 663 – 680, 2010. DOI: 10.1016/j.ijmachtools.2010.04.008
- Madhavulu, G., Ahmed, B. “Hot Machining Process for Improved Metal Removal Rates in Turning Operations”, Journal of Materials Processing Technology 44, рр. 199 – 206, 1994.
- Kitagawa, T., Maekawa, K. “Plasma Hot Machining for New Engineering Materials”, Wear 139 (2), рр. 251 – 267, 1990. DOI: 10.1016/0043-1648(90)90049-G
- Leshock, C. E., Kim, J.-N., Shin, Y. C. “Plasma Enhanced Machining of INCONEL 718: Modeling of Workpiece Temperature with Plasma Heating and Experimental Results”, International Journal of Machine Tools & Manufacture 41 (6), pp. 877 – 897, 2001.
- Shin, Y. C., Shuting, L., Pfefferkorn, F. E., Rebro, P., Rozzi, J. C., Incropera, F. P., Magazine, A. “Thermally (Laser and Plasma) Assisted Machining: Its Potential and Future”, Abrasives Magazine, pp.16 – 30, 2000.
- Novak, J. W., Shin, Y. C., Incropera, F. P. “Assessment of Plasma Enhanced Machining for Improved Machinability of Inconel 718”, ASME Journal of Manufacturing Science and Engineering 119, рр. 125 – 129, 1997. DOI: 10.1115/1.2836550
- Amin, A. K. M. N., Abdelgadir, M., and Kamaruddin, K. “Effect of Workpiece Preheating on Machinability of Titanium Alloy”, In Proceedings of the International Conference ICAMT, рр. 145 – 152, 2004.
- Ryazantsev, A., Nechaev, V., Bondar, O. “Surface Hardening Technology with a Concentrated Energy Source”, International Journal of Integrated Engineering 11 (8), рр. 135 – 142, 2019. DOI: 10.30880/ijie.2019.11.08.014
- Vorontsov, B., Bosansky, M., Kyrychenko, I., Kuzmenko, N., Stupnytskyy, V., Kuleshkov, Y., Ustinenko, A. “Methods of designing gear’s machining tools with the hyperboloid cutting part”, Strojnícky časopis – Journal of Mechanical Engineering 70 (1), pp. 135 – 142, 2020. DOI:10.2478/scjme-2020-0013
- Soroka, O., Rodichev, I., Vorontsov, B., Protasov, R. “Structural strength of cemented carbides”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 291 – 298, 2021. DOI:10.2478/scjme-2021-0035
- Vorontsov, B.S., Pasichnyk, V.A., Lashyna, Y.V. “Interactive Control of the Teeth Gear Shaping in the Cutting Tools Design”, Advances in Gear Theory and Gear Cutting Tool Design, Springer Cham., pp. 205 – 231, 2022. DOI: 10.1007/978-3-030-92262-7_7
- Hasanov, M., Klochko, A., Horoshaylo, V, Vorontsov, B., Ryazantsev, A. “Duplex Scheme of the Technological Impact of the Provision of Operational Properties of a Hardened Large Module Gears”, International Journal of Integrated Engineering 14 (6), pp. 55 – 62, 2022. DOI: 10.30880/ijie.2022.14.06.006
- Kuleshkov, Y., Chernovol, M., Mahopets, S., Bevz, O., Vorontsov, B,, Kyrychenko, I,, Protasov, R. “Simulation of the instant supply in gear hydraulic machines”, Strojnícky časopis. – Journal of Mechanical Engineering 73 (1), pp. 125 – 136, 2023. DOI: 10.2478/scjme-2023-0010
- Klochko, A., Basova, Y., Gasanov, M., Zakovorotny, A., Fedorenko, V., Myronenko, O., Vorontsov, B., Ryazantsev, A., Protasov, R. “Scientific Basis for the Substantiation of Process Regulations for the Micro-Cutting of Hardened Gears”, Strojnícky časopis – Journal of Mechanical Engineering 73 (2), pp. 83 – 92, 2023. DOI: 10.2478/scjme-2023-0023