Have a personal or library account? Click to login
Methodology For Measuring Forces In Motorcycle Suspension Using A System Based On Analogue Potentiometers Cover

Methodology For Measuring Forces In Motorcycle Suspension Using A System Based On Analogue Potentiometers

Open Access
|Jun 2024

References

  1. Schiehlen, W. “Multibody Systems Handbook” (1st ed.). Berlin, 1990. ISBN 978-364-2509-957.
  2. Cossalter, V. “Motorcycle dynamics” (2nd ed.). USA, 2006. ISBN 978-1-4303-0861-4.
  3. Novotny, P. “Pocitacove simulace v automobilovem prumyslu II: Zaklady numerickych metod I”, Brno, 2019. (in Czech).
  4. Schauer, P. “Vyzkum, Dynamika vozidel”, SADT, UADI FSI VUT. Ustav automobilniho a dopravniho inzenyrstvi [online]. Brno, 2020. Available at: http://www.iae.fme.vutbr.cz/vyzkum-dynamika-vozidel-sadt, (in Czech).
  5. Segeres, J. “Analysis Techniques for Racecar Data Acquisition” (2nd ed.). Warrendale, 2014. ISBN 978-0-7680-6459-9.
  6. Azodo, A. “Survey on Road-Tyre Contact Patch Pattern and Wear Related Aspects”, Strojnícky časopis – Journal of Mechanical Engineering. 67 (2), pp. 5 – 12, 2017. DOI: 10.1515/scjme-2017-0013
  7. Öhlins. Öhlins Front Fork Superbike FGR 300. “Owner’s Manual/ Spare Parts List/ Workshop Manual”, 2012. Retrieved from https://www.ohlins.eu/en/products/motorcycle/fgr-300--4175/
  8. Capriglione, D., Carratù, M., Liguori, C., Paciello, V., Sommella. A. “Soft Stroke Sensor for Motorcycle Rear Suspension”, Measurement 106, pp. 46 – 52, 2017. DOI: 10.1016/j.measurement.2017.04.011
  9. Misa, J. “Adaptive control of magnetorheological dampers”, Ms Thesis, Institute of Automotive Engineering, Brno University of Technology, Brno, Czech Republic, 2020.
  10. Dixon, J. C. “The Shock Absorber Handbook” (2nd ed.). 2007. ISBN 0-7680-00-0-5.
  11. Ragulik, J., Sivcak, M. “Modeling of the Controlled Air Spring”, Strojnícky časopis – Journal of Mechanical Engineering 69 (3), pp. 107 – 112, 2019. DOI: 10.2478/scjme-2019-0037
  12. Vebil, Y. “A Closed-Form Buckling Formula for Open-Coiled and Properly Supported Circular-Bar Helical Springs”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 33 – 48, 2018. DOI: 10.2478/scjme-2018-0025
  13. Reece, J., Shinedling, M., Guzman - Magana, A. “Dodge Viper ACR The Aerodynamics of a Street-legal Race Car”, ATZ Worldwide 119, pp. 36 – 41, 2017. DOI: 10.1007/s38311-016-0185-3
  14. Marchesin, F. P., Barbosa, r. S., Gadola M., Chindamo D. “High downforce race car vertical dynamics: aerodynamic index”, Vehicle System Dynamics 56 (8), pp. 1269 – 1288, 2018. DOI: 10.1080/00423114.2017.1413196
  15. Fédération Internationale de l’Automobile, “FIA F3 Technical regulations”, FIA F3 REGULATIONS, 2023. Retrieved from https://www.fia.com/regulation/category/106
  16. Fédération Internationale de Motocyclisme. Technical regulations. “FIM MOTO3™ JUNIOR WORLD CHAMPIONSHIP REGULATIONS”, 2021. Retrieved from https://www.fim-moto.com/en/documents
  17. Barethiye, V., Pohit, G., Mitra, A. “A combined nonlinear and hysteresis model of shock absorber for quarter car simulation on the basis of experimental data”, Engineering Science and Technology, an International Journal 20, pp. 1610 – 1622, 2017. ISSN 2215-0986.
DOI: https://doi.org/10.2478/scjme-2024-0010 | Journal eISSN: 2450-5471 | Journal ISSN: 0039-2472
Language: English
Page range: 91 - 102
Published on: Jun 1, 2024
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year

© 2024 Jiří Míša, Martin Tobiáš, Martin Repka, Martin Straka, Lukáš Gregor, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.