References
- Šmak, R., Votava, J., Polcar, A. “The cooling media influence on selected mechanical properties of steel”, Acta Technologica Agriculturae 23(4), pp.183 – 189, 2020. DOI: 10.2478/ata-2020-0029
- Cervantes-García, A., Solorio-Díaz, G., Vergara-Hernández, H. J., Hernández-Morales, B., “Fluid dynamics around flat-end cylindrical quench probes under isothermal and nonisothermal conditions”, Revista Mexicana de Ingeniería Química 17(2), pp. 707 – 721, 2018. DOI: 10.24275/10.24275/uam/izt/dcbi/revmexingquim/2018v17n2/Cervantes
- Boonluang, T. “The effect of shaft diameter on hardness distribution and case harden depth of aisi4130 alloy steel after quenching”, Key Engineering MaterialsTrans Tech Publications Ltd 792, pp. 23 – 29, 2018. DOI: 10.4028/www.scientific.net/KEM.792.23
- Liu, H., Zhang, H., Li, J. “Thickness dependence of toughness in ultra-heavy low-alloyed steel plate after quenching and tempering”, Metals 8(8), pp. 628, 2018. DOI: 10.3390/met8080628
- Kim, K. S. “Characteristic analysis of carburized quenching processes for bevel gear of automobile driving part”, Current Nanoscience 10(1), pp. 51 – 55, 2014.
- Simha, N. A., Sushanth, M. P., Sachin, V. B., Kumar, T. P., Krishna, V. “Estimation of hardness during heat treatment of steels”, Metal Science and Heat Treatment 61(7), pp. 448 – 454, 2019. DOI: 10.1007/s11041-019-00444-9
- Maisuradze, M. V., Kuklina, A. A. “Numerical and experimental investigation of the heat treated steel part microstructure and hardness”, Materials Science Forum, Trans Tech Publications Ltd 946, pp. 346 – 350, 2019. DOI: 10.4028/www.scientific.net/MSF.946.346
- Qamar, S. B. “Manufacturability evaluation: a CFD approach for Jominy hardenability test”, Materials and Manufacturing Processes 33(16), pp. 1881 – 1888, 2018. DOI: 10.1080/10426914.2018.1512129
- Smoljan, B., Iljkic, D., Hanza, S. S., Jokic, M., Stic, L. “Computer simulation of mechanical properties and distortions during the quenching of steel”, IOP Conference Series: Materials Science and Engineering, IOP Publishing 400 (4), pp. 042 – 053, 2018. DOI: 10.1088/1757-899X/400/4/042053
- Trush, V., Maruschak, P., Lavrys, S., Luk’yanenko, A. “Effect of Heat Treatment in Oxygen-Containing Medium on Fatigue Life of Zirconium Alloy”, Strojnícky časopis – Journal of Mechanical Engineering 72(2), pp. 211 – 218, 2022. DOI: 10.2478/scjme-2022-0030
- Moltasov, A., Tkach, P., Ustynenko, O., Protasov, R. “Effect of load eccentricity on stress condition of butt welded joint with asymmetrical reinforcement”, Strojnícky časopis – Journal of Mechanical Engineering 72(1), pp. 99 – 108, 2022. DOI: 10.2478/scjme-2022-0010
- Haasen, P., “Physikalische Metallkunde”, Springer-Verlag, Berlin, 1974. DOI: 10.1007/978-3-642-96199-1_11
- Bain, E. C., Dunkirk, N. Y., “The Nature of martensite”, Trans. AIME 70, pp. 25 – 45, 1924.
- Liščić, B., Singer, S., Smoljan, B. “Prediction of quench-hardness within the whole volume of axially-symmetric workpieces of any shape”, Strojniški Vestnik/Journal of Mechanical Engineering 56(2), pp. 104 – 114, 2010.
- Lindgard, P.A. “Theory and modeling of the martensitic transformation”, J. Physique IV 1, C4, pp. 3 – 12, 1991.
- Delaey, L. “Diffusionless transformations, in phase transformations in materials”, herausgegeben von P. Haasen, Bd. 5 von Materials Science and Technology, VCH, Weinheim, pp. 339 – 404, 1991.
- Bejan, A., Kraus, A. D. “Heat transfer handbook”, John Wiley & Sons, Inc., Hoboken, New Jersey, pp. 508 – 564, 2003.
- Cakir, M., Ozsoy, A. “Investigation of the correlation between thermal properties and hardenability of Jominy bars quenched with air–water mixture for AISI 1050 steel”, Materials and Design 32, pp. 3099 – 3105, 2011. DOI: 10.1016/j.matdes.2010.12.035